PTU-So Emo-tional

PTU-So Emo-tional

Tube of Choice-I am using the artwork of Anna Marine.  You can purchase
this and other great artwork at CDO.

Scrapkit used is called Emotions by Nette's Nightowl Works *Thanks so
much Nette!!!*.  You can purchase this and other GREAT scrapkits at
Scrappin Naturally.

Font used is Foglihten No 04

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image

Open nnw emo paper3 and copy and paste as a New Layer.  Activate the
bottom layer, Selections Select All, Activate the paper layer, Image
Crop to Selection.

Open your tube, I moved to the right hand side of the tag. Activate the
bottom layer, Selections Select All, Activate the tube layer, Image
Crop to Selection. Layers Duplicate.  On the top layer, Adjust Blur
Gaussian Blur 3.0.  The bottom layer add a drop shadow.  Activate the
top tube layer again and change the Blend Mode to Soft Light.  Layers
Merge Merge Down.

Open nnw emo border1 and copy and paste as a New Layer.  I moved to the
top of the tag.  Activate the bottom layer, Selections Select All,
Activate the border layer, Image Crop to Selection.  Layers Duplicate.
Activate the bottom border layer, Adjust Blur Gaussian Blur 3.0. Layers
Merge Merge Down.  Layers Duplicate Image Flip.

Open nnw emo whisp and copy and paste as a New Layer. Activate the
bottom layer, Selections Select All, Activate the whisp layer, Image
Crop to Selection.

Open nnw emo chain heart and copy and paste as a New Layer.  I moved
this down on the tag so it was a little above the bottom border layer.
Activate the bottom layer, Selections Select All, Activate the chain
layer, Image Crop to Selection. Layers Duplicate.  I moved one below
the bottom border layer and one above the border layer.  With the
chain layer above the border active, Activate your Eraser tool and
erase some of the chain so it looks like it is hooked in with the
border.

Layers Merge Merge Visible.

Add your ©copyright information and name.

PTU-Dark vs Light

PTU-Dark vs Light

Tube of choice-I am using the artwork of Dirk Richter.  You can purchase
this BEAUTIFUL tube and other at CDO.

Scrap kit used is Dark Vs Light by CBJ *Thanks Jo I sooo Love this kit!*.
You can purchase this and other great kits at Whisprd Designz.

Font used is CF Anabelle

~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open CBJ_Dark vs Light Paper10 and copy and paste as a New Layer.  I moved
it down some to get the dark and light on the tag.  Activate the bottom
layer, Selections Select All, Activate the paper layer, Image Crop to
Selection.

Open your tube of choice (I used the close up) and copy and paste as a
New Layer.  I moved mine to the left.  Activate the bottom layer,
Selections Select All, Activate the tube layer, Image Crop to Selection.

Open CBJ_Dark vs Light DoodleEge and copy and paste as a New Layer. I
moved this to the top of the tag behind the tube layer.  Activate the bottom
layer, Selections Select All, Activate the DoodleEge layer, Image Crop to
Selection.


Open CBJ_Dark vs Light DoodleEge2 Image Mirror and copy and paste as a
New Layer.  I moved this to the bottom of the tag behind the tube layer.
Activate the bottom layer, Selections Select All, Activate the Doodle layer,
Image Crop to Selection.

Open CBJ_Dark vs Light Flowers and copy and paste as a New Layer.  Move
below your tube layer and move to where you like it.  Activate the bottom
layer, Selections Select All, Activate the flower layer, Image Crop to
Selection.

Open CBJ_Dark vs Light WhtGlitter and copy and paste as a New Layer.
Activate the bottom layer, Selections Select All, Activate the White Glitter
layer, Image Crop to Selection.

Open CBJ_Dark vs LightBlkGlitter, Image Mirror and copy and paste as a
New Layer.  Activate the bottom layer, Selections Select All, Activate
the Black Glitter layer, Image Crop to Selection.

Open CBJ_Dark vs LightIvyFrame and copy and paste as a New Layer.  I
moved this to the left behind the tube layer between the flower and glitter
layers.  Activate the bottom layer, Selections Select All, Activate the
Ivy Frame layer, Image Crop to Selection.

Open CBJ_Dark vs Light ButFly2, Image Resize 25% and copy and paste as
a New Layer.  I move this on top of the tube and up toward the top.
Activate the bottom layer, Selections Select All, Activate the butterfly
layer, Image Crop to Selection.

Open CBJ_Dark vs Light Word Circle, Image Resize 600X583 and copy and
paste as a New Layer.  I moved this down to where the word from the top
part of the circle was on the tube.  Activate the bottom layer, Selections
Select All, Activate the word circle layer, Image Crop to Selection. I
had to erase some words that were showing.  Layers Duplicate Adjust Blur
Gaussian Blur 3.0

Layers Merge Merge Visible

Add your ©Copyright Information and Name.

PTU-Feeling Devilish

PTU-Feeling Devilish

Tube of Choice-I am using the artwork of Jessica Dougherty.  You can
purchase this and other great artwork at CDO.

Scrapkit used is Inspired by Jessica Dougherty 32-3 by LadyHawwk
Disigns (Beautiful Kit Cathy!  Thanks so much!).  You can purchase this
and other great kits at CDO.

Font used is Lakeshore Drive

~~~~~~~~~~~~~~~~~~~~~~~~

Open a New Transparent Image 700X700

Open your tube and copy and paste as a New Layer.

Open LHD_IB_Dougherty-32-3-Frame1 and copy and paste as a New Layer.
Image Rotate Rotate Clockwise 90 and hit OK.  Copy and paste as a New
Layer and move down on the tag so the bottom of the tube is at the
bottom of the opening on the frame.  You might need to move your tube
around also.  Duplicate your tube and move this below the frame layer.
With your top tube layer active, Activate your eraser tool and erase
and that is hanging over your frame.  I added a drop shadow to the bottom
tube layer.

With your frame layer active, with your magic wand click on the inside
of your frame, Selections Modify Expand 10, Open LHD_IB-Dougherty-32-3-
Paper4 and copy and paste as a New Layer.  Move this below your bottom
tube layer, Selections Invert and hit the delete key once on your keyboard.
Selections Select None.

Open LHD_IB-Dougherty-32-3-ele0 and copy and paste as a New Layer. I
moved this to the left a bit and below the bottom tube layer.

With your magic wand, click on the inside of your window in all the panes.
Selection Modify Espand 10.  Open LHD_IB-Dougherty-32-3-Paper4 and copy
and paste as a New Layer.  Move this below the window layer.  Selections
Invert and hit the delete key once on your keyboard.  Selections Select
None.

Open LHD_IB-Dougherty-32-3-ele13 and copy and paste as a New Layer.
Move this down so it is above the window paper, Layers Duplicate and
move this so it is above the paper layer in the frame.  Activate the
paper layer in the window Selections Select All Selections Float/Defloat
activate that tree layer Selections Invert And hit the Delete key once
on your keyboard.  Selections Select None.  Repeat for the other tree
layer.

Open LHD_IB-Dougherty-32-3-ele6 and copy and paste as a New Layer.
I moved this down ans to the right and above the paper in the frame.
Once happy with your placement, Activate that paper layer in the frame,
Selections Select All Selections Float/Defloat Selections Invert. Activate
the lamp layer and hit the delete key once on your keyboard. Selections
Select None.

Open LHD_IB-Dougherty-32-3-ele9 and copy and paste as a New Layer.
I moved this to the right and moved this below the top tube layer.

Open LHD_IB-Dougherty-32-3-ele10 and copy and paste as a New Layer.
I moved this to the left of the window and Moved to the bottom.

Open LHD_IB-Dougherty-32-3-ele17 and copy and paste as a New Layer.
I moved this to the right of the window and moved to the bottom.

Open LHD_IB-Dougherty-32-3-ele3 and copy and paste as a New Layer.
I moved this to the right so it was on top of the black flower.
I erased the little bit that was showing on the left of the window.

Layers Merge Merge Visible.

I like my tags 600X600 so I resized.

Add ©Copyright information and name and you are done.

PTU-Spooky Cute

PTU-Spooky Cute

Tube and Scrapkit used is Marika Package 10 and Matching Scrap Kit by
LadyHawwk Designs *Thank You so much Cathy!*.  You can purchase this
and other great tubes and kits at CDO.

Mask used is MB and SW Forum Mask 24 by Moonbeams and Spiderwebs.

Font used is Lyrics Movement.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open LHD_Marika-10-Papers3 and copy and paste as a New Layer.  Activate
the bottom layer, Selections Select All, Activate the paper layer, Image
Crop to Selection.

Open LHD_Marika-10-Papers17 and copy and paste as a New Layer. Activate
the bottom layer, Selections Select All, Activate the top paper layer,
Image Crop to Selection.

Open your mask, With the top paper layer active, Layers New Mask Layer
From Image, Scroll down to find your mask and hit OK. Layers Merge Merge
Group.

Open your tube (I used a close up) and copy and paste as a New Layer.
I moved the tube to the far right hand side of the tag. Activate the
bottom layer, Selections Select All, Activate the tube layer, Image
Crop to Selection.

Open LHD_Marika-10-Ele21 and copy and paste as a New Layer. Activate
the bottom layer, Selections Select All, Activate the Green Orb layer,
Image Crop to Selection.

Open LHD_Marika-10-Ele20 and copy and Paste as a New Layer. I moved this
toward the bottom left hand corner. Activate the bottom layer, Selections
Select All, Activate the Blue Orb layer, Image Crop to Selection.

With your tube layer active, Open LHD_Marika-10-Ele7 and copy and paste
as a New Layer. I moved this down to the bottom of the tag to where the
top was all that is showing.  Activate the bottom layer, Selections
Select All, Activate the border layer, Image Crop to Selection. Now do
Selections Select All Selections Float/Defloat Selections Modify Expand
2. Activate the layer under this and Layers New Raster Layer and flood
fill with white.  Selections Select None.

 Now on that White Layer, Adjust Add/Remove Noise Add Noise Gaussian 100% Monochrome Checked and hit OK.Repeat this one more time. Now on both layers (Border and Glitter layer)

I duplicated both Image Flip and moved them below the tube layer.

Open LHD_Marika-10-Ele11 and copy and paste as a New Layer.  I moved down
a bit and moved above the green orb layer.  Activate the bottom layer,
Selections Select All, Activate the Spider layer, Image Crop to Selection.

Open LHD_Marika-10-Ele18 and copy and paste as a New Layer.  I moved this
the mask layer. Activate the bottom layer, Selections Select All, Activate
the Jewel layer, Image Crop to Selection.

Open LHD_Marika-10-Ele25 and copy and paste as a New Layer. I moved this
up and the the right about half way.  Move below the Jewel layer. Activate
the bottom layer, Selections Select All, Activate the Flower layer,
Image Crop to Selection.

Open LHD_Marika-10-Ele34 and copy and paste as a New Layer.  I moved this
between the tube and orb and down to where only the flower is showing.
Move this down under the Flower Layer. Activate the bottom layer, Selections
Select All, Activate the Black Flower layer, Image Crop to Selection.

Open LHD_Marika-10-Ele31 and copy and paste as a New Layer.  I moved this
to the Left and just above the top border layer.  Layers Duplicate Image
Mirror/Flip and moved this above the bottom Border layer.  Layers Merge
Down Activate the bottom layer, Selections Select All, Activate the Glow
layer, Image Crop to Selection.

Layers Merge Merge Visible.

Add your ©copyright information and Name.

With Lyrics Movement it is a very light font so you will have to duplicate
many times.

PTU-All of my love

PTU-All of my love

Tube of Choice- I am using the artwork of Helena Reis.  You can purchase
this and other Great artwork at DSI.

Scrapkit is called All of my love by Chaos Priestess.  You can purchase
this Beautiful kit at others at Whisprd Designz.

Font used is Anywhere but home.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open AOML_Paper_16 and copy and paste as a New Layer.  I moved it up a
bit to get the "floor" in on the tag.  Activate your bottom layer, Selections
Select All, Activate your paper layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer.  I moved to the right
and down a touch. Activate your bottom layer, Selections Select All,
Activate your paper layer, Image Crop to Selection.  There was a tiny bit
of her hand showing in a weird spot and I used my eraser tool to erase it.

Open AOML_Clock2 and copy and paste as a New Layer.  I moved this to the
upper left hand side of the tag.  Activate your bottom layer, Selections
Select All, Activate your clock layer, Image Crop to Selection.

Open AOML_Doodle_05 and copy and paste as a New Layer.  I moved this
below the tube layer and to the right.  Activate your bottom layer,
Selections Select All, Activate your doodle layer, Image Crop to Selection.

Open AOML_Flower_02 and copy and paste as a New Layer. I moved this up and
to the left so it was on top of the clock a little bit.  Activate your
bottom layer, Selections Select All, Activate your flower layer, Image
Crop to Selection.

Open AOML_Foliage_01 and copy and paste as a New Layer. I move this below
the doodle layer but adjust so that it was above the flower layer. Activate
your bottom layer, Selections Select All, Activate your leaves layer,
Image Crop to Selection.

Open AOML_GlitterSplat_03 Image Flip and copy and paste as a New Layer.
I moved this up and under the clock layer. Activate your bottom layer,
Selections Select All, Activate your glittersplat layer, Image Crop to
Selection.

Open AOML_MeshHeart_El01 and copy and paste as a New Layer.  I moved this
below the clock layer and to the left.  Activate your bottom layer, Selections
Select All, Activate your mesh layer, Image Crop to Selection.

Open AOML_ButterflyEl_01 I moved this above the clock layer and to the
left.  Activate your bottom layer, Selections Select All, Activate your
butterfly layer, Image Crop to Selection.

Layers Merge Merge Visible.

Add your ©Copyright information and name and you are done!







 

PTU-Autumn Breeze

I am excited to announce I am now on the CT of Whisprd Designz!  Beautiful Scrapkit by BEAUTIFUL People!  You should definately go check out the store!

~*~*~*~*~*~*~*~*~*~*~*~*~

PTU-Autumn Breeze

I am using the artwork of Anna Marine. You can purchase this and other
Beautiful artwork at CDO.

I using a scrapkit by WDDesignz called Autumn Breeze (Thank You so
much Melissa!!!).  You cam purchase this and other Great kits at
Whisprd Designz.

Font used is Many Weatz

Optional-I did use a fairy dust brush.  You can find these at deviantart
or do a google search.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open pp06 and copy and paste as a New Layer.  Activate the bottom layer,
Selections Select All, Activate your paper layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer and move to where you
like it.  Activate the bottom layer,Selections Select All, Activate your
tube layer, Image Crop to Selection.

Open berries01 Image Mirror and copy and paste as a New Layer.  Move
behind the tube layer and down.  Once happy with your placement, Activate
the bottom layer,Selections Select All, Activate your berry layer, Image
Crop to Selection.

Open fence03 Image Resize 650X392 and copy and paste as a New Layer.  I
moved it down below the tube and down on the tag.  Activate the bottom layer,
Selections Select All, Activate your fence layer, Image Crop to Selection.

Open Leaves01 Image Resize 650X412 and copy and paste as a New Layer. I
moved this to the top of the tag and below the berry layer.  Activate
the bottom layer,Selections Select All, Activate your leaves layer,
Image Crop to Selection.

Open flower13 and copy and paste as a New Layer.  I moved to the bottom
right hand corner of the tag and moved it so it was right above the
paper layer.  Activate the bottom layer,Selections Select All, Activate
your white flower layer, Image Crop to Selection.  Repeat with flower16
but put it in the bottom left corner.

This part is optional.  With your bottom paper layer active, Layers New
Raster layer and using white I used a fairy dust brush to put some stars
in the back ground.

Activate your bottom paper layer, Layers Duplicate.  Move the duplicate
to the top.  Selections Select All Selections Modify Contract 8 and hit
the delete key once on your keyboard.  Selections Select None.

Layers Merge Merge Visible.

Add your ©Copyright information and name.

PTU-Goddess of Autumn

Goddess of Autumn

I am using the GORGEOUS artwork of Maxine Gadd.  You can purchase this
and other equally GORGEOUS artwork at CDO.

I am using the BEAUTIFUL scrapkit called Subtle Autumn by Hungry Hill
(*Thanks so much Alison*) You can purchase this and other GREAT kits
by Hungry Hill at CDO.

Font used is Moonstone

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image.

Open frame-4 and copy and paste as a New Layer.

Open your tube and copy and paste as a New Layer. Move up so it mostly
fits in the frame.  Layers Duplicate. Move this below the frame layer.
I added a slight drop shadow. With the top tube layer active, activate
your eraser tool and erase the little bit on the sides that is going
over the frame.

With your frame active, Activate your magic wand and click on the inside
of your frame.  Selections Modify Expand 20.

Open paper-10 and copy and paste as a New Layer.  Selections Invert and
hit the delete key once on your keyboard.  Selections Select None.  Move
the paper below your bottom tube layer.

Open fairy-lights. Image Resize 455X408 and copy and paste as a New Layer.
I moved this just above the paper layer and down.  Activate the paper
layer Selections Select All Selections Float/DeFloat Selections Invert
Activate the fairy light layer and hit the delete key once on your keyboard.
Selections Select None.

Open bricks, Image Resize 455X424 and copy and paste as a New Layer.
I moved this above the paper layer and put a slight drop shadow on it.

Open sparkle and copy and paste as a New Layer.  I moved this down above
the brick layer.

Open grass, Image Resize 600X450 and copy and paste as a New Layer. I
Moved this to the top of the frame and below the frame layer.  Layers
Duplicate Image Flip.

Open leaf-fall and copy and paste as a New Layer.  I moved this to the
left and below the grass layer.  Layers Duplicate Image Mirror.  Merge
these together (Layers Merge Merge Down) then Duplicate again Image Mirror
Image Flip.

Open hummingbird Image Resize 150X118 and copy and paste as a New Layer.
I moved this to the upper left hand side of the frame.  Layers Duplicate
and on the top copy Adjust Blur Gaussian Blur 3.00 and change the blend
mode to overlay.

Open moth-2, Image Resize 150X108 and copy and paste as a New Layer. I
rotated the moth Image Rotate Free Rotate Left 23.00

Layers Merge Merge Visible.

Add Your ©copyright information and name.

With the name, I used the color from the tube (forehead area) for the
base and then I Selections Select All, Selections Float Defloat and them
copy and paste the closeup tube and moved down.  Selections Invert and
hit the delete key once on my keyboard.  Might need to activate the bottom
layer Selections Select All and then click on the tube part of the name
Image Crop to Selection.

FTU-Magic Spell

FTU-Magic Spell

Tube of Choice-I am using the artwork of Caron Vinson (This cute wizard
reminded me of Dumbledore LOL)  You can purchase this and other great
artwork at CDO.

Fonts used Grachi 2 and Garineldo SC

We will be using the Rounded Rectangle with your Selection Tool and Circle
and Star Preset Shapes.

Filter used is Mura's Meister Copies Tiling.

I also used some brushes.  Trees, moon and birds.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image.

Open your tube and copy and paste as a New Layer.


Layers New Raster Layer. Open your Selection Tool and under Selection
type scroll down to Rounded Rectange, Mode Add(Shift) Feather 0 Anti-alias
checked and make a rounded rectangle going across.

  Size choice is yours.
Don't De-Select. I then flood filled with a color from my tube. Selections
Modify Contract 8 Layers New Raster Layer and I flood filled with a lighter
color from my tube.  Selections Select None.  I moved the smaller rectangle up and to the right
to make it slightly off center.

Layers New Raster Layer and repeat with the Rounded Rectangle but make it
go up and down this time.  I used the color of the eyes this time you may
choose to use a different color and I say Go For It!  Repeat with the smaller
Rectangle. and make it off Center.

With your original rectangle active, using your star preset tool (symmetric
shape) and your colors chosen (I did a gradient of yellow and white)
make a small star. Objects Align Center in Canvas Layers Convert to Raster
Layer.  Effects Plug Ins Mura's Meister Copies Tiling and hit OK (I didn't
change the numbers) and you should have a bunch of stars showing.  Activate
that first rectangle Selections Select All Selections Float/DeFloat Selections
Invert Activate the Star Layer and hit the Delete Key once on your keyboard.
Selections Select None.

You could either repeat with the stars for the other set of standing Rectangles
or use a preset shape of your choice.

With your background/Raster 1 active, using your Eclipse Preset tool
Mine automatically makes everything black.  If yours doesn't change your
background to black, Foreground Null and make a circle. Obejects Align
Center in Canvas.  Selection Select All Selections Float/ DeFloat Layers
New Raster Layer, I chose a really light lavender color but use what looks
best with your tube and other color choices and flood fill. Here is where
I would do your Text on a curve.  Layers New Raster Layer and if you move
your mouse by the edge of the circle you will see the letter A with a curve
under it, click and your font box will show up.  Write what you will in
that box and hit ok. Click on the Black Circle, Layers Convert to Raster
Layer Adjust Blur Gaussian Blur 3.00.

Now here is where I added my brushes.  Remember to add a New layer then
apply the brush.  I added Trees to my front Circle and Moon and Birds to
the standing Rectangle.

Layers Merge Merge Visible. I resized to 600X600.

Add your name and ©copyright information.