PTU-Burlesque

PTU-Burlesque

Tube of Choice-Iam using the GORGEOUS artwork of Anna Marine.  You can

purchase this and other STUNNING artwork at CDO.

Scrapkit used-I am using the Lovely scrapkit called Burlesque by Monti's Scraps

(Thank You so much Monti!  I LOVE this kit!  So many different ideas for a tag!)

You can purchase this and other BEAUTIFUL scrapkits at CDO.

Font used is a FTU Font called Mademoiselle Camille.

~~~~~~~~~~~~~~~~~~~~~

Open an 800X250 Transparent New Image.

Open Paper9 and copy and paste as a New Image.  Activate your bottom layer,

Selections Select All, Activate your paper layer, Image Crop to Selection.

Open Element5 and copy and paste as a New Layer.  Activate your bottom layer,

Selections Select All, Activate your corset layer, Image Crop to Selection.

Open Element6 and copy and paste as a New Layer.  I moved to the left hand side

and moved below the first corset layer.  Image Flip.  Activate your bottom layer,

Selections Select All, Activate your second corset layer, Image Crop to Selection.

Layer duplicate, Image Mirror.  I then merged the corset layers together.

Open your tube and copy and paste as a New Layer.  I moved to the right hand

side of the tag.  Activate your bottom layer, Selections Select All, Activate your 

tube layer, Image Crop to Selection.  Layers Duplicate.  On that top duplicate layer,

Adjust, Blur, Gaussian Blur 3.00. and change the Blend Mode to Blur.

Open Frame2 and copy and paste as a New Layer.  Image Rotate Free Rotate To The Right Free 45.00 and

Hit OK.  Activate your bottom layer, Selections Select All, Activate your Frame 

layer, Image Crop to Selection.

With your Top Tube layer active, Open Element60 and copy and paste as a New 

Layer.  I moved so it was swirling around to face.  Activate your bottom layer,

Selections Select All, Activate your fairy dust layer, Image Crop to Selection.

Open Element45 and copy and paste as a New Layer.  I moved behind the frame 

layer and down so it is peaking out behind the frame on the left and down.  Activate 

your bottom layer, Selections Select All, Activate your red rose layer, Image Crop 

to Selection.

Open Element44 and copy and paste as a New Layer.  I moved in front of the red 

rose Layer and up.  Activate your bottom layer, Selections Select All, Activate your 

Black Rose layer, Image Crop to Selection.

With the very top layer active, Open Paper1 and copy and paste as a New Layer.

Activate your bottom layer, Selections Select All, Activate your top paper layer, 

Image Crop to Selection.  Selections Select All, Selections Modify Contract 3, Hit 

OK.  Now hit the Delete Key once on your keyboard.  Selections Select None.

Open WordArt2, Image Resize 230X57 and copy and paste as a New Layer.  I 

moved to the upper right.  Now comes the fun part!  With your freehand Selection

Tool, draw around the lights.  Add a New Raster layer  and flood fill with White and

move below the word art.  Selections, Select None.

At this point Add your ©copyright information and Name.

Enjoy!

hand side of the tag.

PTU - My Immortal

PTU - My Immortal Timeline

Tube of Choice - I am using the GORGEOUS Artwork of Ted Hammond.  You can

purchase this and other STUNNING Artwork at CDO.

Scrap Kit used is called Immortal by Hungry Hill (OMG Alison!  Thank You so much

for allowing me to use this BEAUTIFUL kit!) You can purchase this kit and other LOVELY kits at CDO.

Font used is a FTU font called Undergone.

Filter used is Xero Bad Dreams.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open an 851X315 Transparent New Image

Open your tube of choice and copy and paste as a New Layer.  I moved mine down

so you could soo the face LOL but left her in the middle.  Activate your bottom layer,

Selections Select All, Activate your tube layer, Image Crop to Selection.  Layers

Duplicate.  Move the Duplicated layer under the original and Adjust Blur Gaussian 

Blur 3.00.  On the original tube layer, Effects Plugins Xero Bad Dream and I used

what was there (Softness and Strength at 128 and the rest at 0).

Open paper-3 and copy and paste as a New Layer.  Move below your tube layers.

Activate your bottom layer, Selections Select All, Activate your paper layer, Image

Crop to Selection.

Activate your moon layer and copy and paste as a New Layer.  Move up into the

upper left hand corner.  Activate your bottom layer, Selections Select All, Activate 

your moon layer, Image Crop to Selection.

Open the drape layer and copy and paste as a New Layer.  Move into the upper 

left hand corner of the tag. Layers Duplicate, Image Mirror. Layers Merge, Merge

Down.  Activate your bottom layer, Selections Select All, Activate your drape layer, 

Image Crop to Selection.

With your paper layer active, Open castle-mist and copy and paste as a New Layer.

I moved this down and to the right.  Activate your bottom layer, Selections Select 

All, Activate your castle-mist layer, Image Crop to Selection.

Open birds. Image Resize 400X223 and copy and paste as a New Layer.  I moved 

to the right hand side of the tag.

Open candles and copy and paste as a New Layer.  Move under tube layer and down

so it looks like flames are coming up from the bottom of the tag.  Activate your 

bottom layer, Selections Select All, Activate your candle layer, Image Crop to 

Selection.

Open tree and copy and paste as a New Layer.  I moved behind the candle layer

and to the right a bit.  Layers Duplicate and on the original layer Adjust Blur Gaussian

Blur 3.00. Activate the top tree layer and Layers Merge Merge Down.  Activate your 

bottom layer, Selections Select All, Activate your tree layer, Image Crop to Selection.

With your top layer active, Open WordArt, Image Resize 600X176 and copy and 

paste as a New Layer.  I moved to the bottom right hand side of the tag.  

Layers Merge, Merge Visible.  I added a small frame so Layers, New Raster layer

and flood fill with a dark color.  Selections Select All, Selections Modify Contract

3 and hit the delete key once on your keyboard.  Selections Select None.  Layers

Duplicate and Adjust Blur Gaussian Blur 3.00.

Add your ©copyright info (remember no URL due to facebook rules) and Licencing

Information.  Add a Name and your are all done!

Enjoy!

PTU - Autumn Days

PTU-Autumn Days

I am using the BEAUTIFUL artwork of PINUPTOONS.  You can purchase this and

other GORGEOUS artwork at CDO.

The Scrap Kit I am using is called Autumn Days by Tammy Kat Dezigns (OMG Tammy!

This kit is too cute!  Thank You!) You can purchase this and other WONDERFUL Scrap Kits at CDO.

Font used is a FTU font called Foglihten No 07.

~~~~~~~~~~~~~~~~~~~~~~~~~

Open a Transparent New Image 800X700.

Open tk-autumndays-frame2 and copy and paste as a New Layer.

Open tk-autumndays-frameheart and copy and paste as a New Layer.  I moved

to the left a bit to center it on the round frame.

Open a paper (I used tk-autumndays-pp-greem) and copy and paste as a New 

Layer and move below the heart frame.  With the heart frame active, activate your

magic wand and click inside the heart frame.  Selections, Modify, Expand 10 and

hit OK.  Selections Invert, activate your paper layer and hit delete once on your 

keyboard.  Selections Select None.

Open tk-autumndays-clip and copy and paste as a New Layer.  I moved it to where

I liked it on the round frame and moved it below it.  Layers Duplicate and move the

duplicated one above the frame.  On the bottom original clip, Adjust Blur Gaussian

Blur 3.00 and hit OK.

With your paper inside of the heart frame active, Open tk-autumndays-fence and

copy and paste as a New Layer.  Move down to where you like it.  Activate the 

paper layer, Selections Select All Selections Float/Defloat Selections Invert, 

Activate the fence layer and hit the Delete key once on your keyboard.  Selections

Select None.

Activate your top layer and copy and paste your tube as a New Layer.  I moved to 

the left hand side of the frame.

Open tk-autumndays-leafcluster and copy and paste as a New Layer.  I moved to

the left hand side of the frame and moved down to just above the round frame

layer.

Open tk-autumndays-metaldeco and copy and paste as a New Layer.  I moved to

the left hand side and moved down to just above the leaf cluster.

Open tk-autumndays-metalbutton and copy and paste as a New Layer.  I moved 

down to above the fleur de lis.

Open tk-autumndays-paperflower and copy and paste as a New Layer.  I moved

just below the tube layer and to the lower right hand side of the heart frame.

Open tk-autumndays-raffiabow-creme and copy and paste as a New Layer.  I 

moved down to just above the round frame layer and to the bottom right hand side

of the tag below the paper flower.

With your bottom layer active, Open tk-autumndays-splatter-orang and copy and 

paste as a New Layer.

Open tk-autumndays-splatter-red, Image Mirror/Flip and copy and paste as a New

Layer.  Should be above the orange spatter.

Open tk-autumndays-swirl-metal, Image Mirror/Flip and copy and paste as a New 

Layer.  I moved to the bottom right hand side of the tag and moved down to just 

above the round frame.

With your paper layer active, Open tk-autumndays-treebranch and copy and paste

as a New Layer.  I moved around to where I liked it.  Activate your paper layer again, 

Selections Select All, Selections Float/Defloat, Selections Invert, Activate your tree

branch layer and hit the Delete key once on your keyboard.  Selections Select None.

Click on your top Clip layer and Layers Arrange Bring to the top.  Open tk-autumndays-

tag1 and copy and paste as a New Layer.  Move below the clip layer and center

it so it looks like the clip is holding it.

Add a Drop Shadow to all layers except the 2 splatter layers, The clips, and the

paper layers.

I like my tags at 600 so I resized all layers to 600X525.

Layers Merge Merge Visible.

Add your ©copyright information and Name.

Enjoy!

PTU-The Face of Autumn

PTU - The Face of Autumn

Tube of Choice - I am using the GORGEOUS artwork of Maxine Gadd.  You can 

purchase this and other BEAUTIFUL artwork at CDO.

Scrapkit used is a STUNNING kit by Hungry Hill called Blaze(OMG Alison!  Such a great kit!

Thank You so much for letting me use it!)  You can purchase this and other LOVELY

kits at CDO.

Filter used is Mask 42 MB and SW by Moonbeams and Spiderwebs.

Font used is a FTU font called One Chance.

~~~~~~~~~~~~~~~~~~~~~~~~~~

Open an 800X700 Transparent New Image.

Open paper-6 Adjust Sharpness Sharpen More.  I did this twice.  Copy and paste 

as a New Layer.  Open your mask, Layers New Mask Layer from Image, Scroll

to find your mask, click on it and hit OK.  Layers Merge Merge Group.

Open frame-3, Image Resize 550X542 and copy and paste as a New Layer.

Image Rotate, Free Rotate Left Free 45 and hit OK.

Open your tube of choice (I am using the close up) and copy and paste as a New

Layer.  Move below the frame layer and move to where you like.  Layers Duplicate and

move above the frame layer.  With your Erase tool erase carefully on the top tube

layer so that the flowers from the frame show thru.  Do the same on the bottom

tube layer so the bottom corners of the tube are gone.  Add a dropshadow to the

bottom tube layer.

Open berries and copy and paste as a New Layer.  I moved to the left hand side

of the frame and down to just above the mask layer. Add a dropshadow.

Open chrysanthemum and copy and paste as a New Layer.  I moved to the left

hand side of the tag and below the berries layer.  Add a dropshadow.

Open echinacea and copy and paste as a New Layer.  I moved below the berries

layer and to the left a touch.  Add a dropshadow.

Open grasses and copy and paste as a New Layer.  I moved below the berries 

layer a touch and to the right. Add a dropshadow.  You might need to erase a bit 

that is poking out on the left hand side.

Open heart-stitches and copy and paste as a New Layer.  Move below the grasses

layer.  Add a dropshadow.

Open leaf-4 and copy and paste as a New Layer.  Move below the heart-stitches

layer and to the upper right.  Add a dropshadow.  You might need to erase a bit of

stem on the left hand side of tag.

Open silk-flower and copy and paste as a New Layer.  Move to the bottom of the 

tag.  Move below the heart-stitches layer.  Add a dropshadow.

Open twig Image Mirror and copy and paste as a New Layer.  Move to the right 

and below the leaf-4 layer.  Add a dropshadow.  There may be some hanging 

under so just erase it.

Open twine-star and copy and paste as a New Layer.  Move to the right a bit and 

move down to just above the mask layer.  Add a dropshadow.

I then Resized the tag to 600X525.

Add your ©copyright and Licensing Information and Name.

Enjoy!

PTU-Renaissance Bride Timeline Banner

PTU-Renaissance Bride

Tube of choice - I am using the STUNNING artwork of Maxine Gadd.  You can 

purchase this and other BEAUTIFUL artwork by Maxine and other Artists at CDO.

Filters used - DSB Flux Blast and Bright Noise , Greg's Factory Outlet Vol. II Pool 

Shadow, Willy Tablet Lines Tramages TeeWee and Xero Bad Dream.

Font used - FTU font called Beaked Tyrant

~~~~~~~~~~~~~~~~~~~~~~~~~

Open an 851X315 transparent new image.

Copy and paste your tube.  Layers Duplicate, Image Flip and move either to the 

left or right of the original tube and move below that tube so there is very little of 

the background showing.  Layers Duplicate, Image Mirror.  Move if needed to cover

the background.  Activate the original layer and Layers Duplicate.  Move either to

the far Left side or Right side.  Layers Duplicate, Image Mirror.  I then made my

very bottom layer (Layer 1) inactive and Layers Merge, Merge Visible. Activate 

your bottom Layer, Selection Select All, Activate the tube layer, Image Crop to

Selection.  Layers Duplicate.  Hide the top layer as we will be working with the 

original layer now.

With the bottom tube layer Active Effects, PlugIns, DSB Flux Blast Direction Left

Percentage 20 and hit OK.  Do the same again but change the direction Right.

Do Upwards and Downwards too.

Effects PlugIns Willy Tablet Lines Everything is at 0 except Line Spacing and that 

should be at 2.

OK Activate your Duplicate copy of your tube layer (Should be your top copy), 

Adjust Blur Gaussian Blur 3.00.  Effects PlugIns DSB Flux Bright Noise Intensity

at 41 and click the lighter circle and hit OK.

Effects PlugIns Tramages TeeWee  Input Channel (R,G,B) at 11 andMode at

212 and hit OK.

Change your blend mode to Overlay.

Copy and paste your tube again and move it toward the right a bit and down a 

touch.  Activate your bottom Layer, Selection Select All, Activate the top tube layer, 

Image Crop to Selection. Effects PlugIns Xero Bad Dream Softness and Strength 

at 128 and everything else at 0.  Add a dropshadow.

Add your ©copyright information and Name.

PTU - Elegant Evil Timeline Banner

PTU-Elegant Evil Timeline Banner

I am using the Stunning Artwork of Anna Marine.  You can purchase this and other

BEAUTIFUL Artwork at CDO.

Scrapkit used is called The Darkness (OMG Patty!  This is sooo BEAUTIFUL!

Thank you so much for letting me use it!) You can purchase this and other Stunning Scrapkit at Treasured Scraps.

Font used is a FTU font  called Bronze Script.

Plug In used is Bad Dream by Xero

~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open an 851X315 Transparent New Image.

Open Paper_06 and copy and paste as a New Layer.  Activate your bottom layer,

Selections Select All, Activate your paper layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer.  As the tube I used has two

choices, I used the one with the oval line on the bottom and when I put it on the tag

I moved it down so that the line didn't show.  I moved the tube to the right.  Activate 

your bottom layer, Selections Select All, Activate your tube layer, Image Crop to 

Selection.  Effects, Plug Ins, Xero-Bad Dream.  Softness and Strength at 128 and

the rest at 0.

Open Frame_03, Image Rotate. Rotate Clockwise 90 and copy and paste as a 

New Layer.  Activate your bottom layer, Selections Select All, Activate your frame 

layer, Image Crop to Selection.  Move below the tube layer.

Open Element_01 and copy and paste as a New Layer.  I moved it behind the 

tube so the glow from the frame highlighted the white parts showing on the hair.

I did this in two spots on the left and right. Just carefully erase any candle that is

showing other than the glow.

Open Element_16 and copy and paste as a New Layer.  I moved above the tube 

layer and down and to the right.  Activate your bottom layer, Selections Select All, 

Activate your cloud/mist layer, Image Crop to Selection.  Copy and paste again

and move behind the tube layer and down and to the left.  I made sure it was a 

little higher then the other one I used.  Activate your bottom layer, Selections 

Select All, Activate your second cloud/mist layer, Image Crop to Selection.

Open Element_17 and copy and paste as a New Layer.  Move behind the back

mist layer and down to help the glow you did earlier.  Activate your bottom layer,

Selections Select All, Activate your lamp post layer, Image Crop to Selection.

Open Element_18 and copy and paste as a New Layer.  Image mirror.  I moved

it so it was behind the tube layer and above the paper layer.  Activate your bottom 

layer, Selections Select All, Activate your fabric layer, Image Crop to Selection.

Open Element_24 and copy and paste as a New Layer.  I moved down on the tag

so it looks like it is peaking out from the mist and I moved to just above the paper

layer.  Activate your bottom layer, Selections Select All, Activate your bridge layer, 

Image Crop to Selection.

Open Element_38 and copy and paste as a New Layer.  I moved to the upper left 

hand side of the tag so just the gems are showing.  Activate your bottom layer,

Selections Select All, Activate your flower/gem layer, Image Crop to Selection.

Open Element_02, Image Resize 100X102 and copy and paste as a New Layer.

I moved so it was sitting on the bridge.

Open Element_11, Image Resize 100X138 and copy and paste as a New Layer.

I moved up and to the left a little bit so it looks like it is flying away from the tube.

Add a drop shadow to everything but the paper.

Layers Merge, Merge Visible.

Add © information including License.  Add Name.

I hope you enjoyed doing this tutorial!

PTU-The Guardian

PTU-The Guardian

Tube of choice - I am using the BEAUTIFUL artwork of Michael Calandra!  You can

purchase this and other art at CDO.

Scrapkit used is by LadyHawwk Designs (Such a GORGEOUS kit Cathy!  Thank

You so much!) You can purchase this kit at CDO.

Mask used is Mask 56 MB and SW by Moonbeams and Spiderwebs.

Font used is a FTU font calles Brev Script Personal

~~~~~~~~~~~~~~~~~~~~~

Open  a New Transparent Image 800X700.

Open LHD_IB_ICalandra-20-3-Frame2 and copy and paste as a new layer.

Image Rotate, Free Rotate, Left 90 degrees and hit ok

With your magic wand click the inside of your frame to get the little ants going.  

Selections Modify Expand 10 and hit OK.  I added a new layer under the frame 

and flood filled with white.  Open LHD_IB_ICalandra-20-3-Wordart and copy and

paste as a new layer.  Selections Invert and hit the delete key once on your keyboard.

Selections Select None.

With your frame as your active layer, Open your tube (I used the one without wings)

and copy and paste as a New Layer.I moved to the center of the frame.  Move below

the frame layer.  Layers Duplicate and move the duplicated one above the frame.

With your eraser tool, erase the parts of the tube that is over the flowers and the

frame and below the frame.  Activate the duplicated tube layer and erase what is

below the frame.  If you erase too much remember the undo arrow is your best

friend!

The following make sure your top layer is active so you can see where you are 

moving the elements.

Open LHD_IB_ICalandra-20-3-Ele1 and copy and paste as a New Layer.  I moved

to the right and below the white floodfill.

Open LHD_IB_ICalandra-20-3-Ele8 and copy and paste as a new layer.  I moved

to the right of the tube and above the gear layer so that it is showing on the upper

right hand side of the frame.

Open LHD_IB_ICalandra-20-3-Ele9and copy and paste as a new layer.  I moved 

this to the bottom right hand side of the frame and moved below the gear layer.

Open LHD_IB_ICalandra-20-3-Ele11 and copy and paste as a New Layer.  I moved 

down so the beads were showing under the bottom of the tube.  Move below the

white floodfill layer.

Open LHD_IB_ICalandra-20-3-Ele19 Image Resize 227X195 and copy and paste

as a new layer.  I moved below the beads layer and to the bottom left hand side of 

the frame.

With your very bottom layer active, Open LHD_IB_ICalandra-20-3-Paper4 and 

copy and paste as a New Layer.  Open Mask 56 MB and SW.  Layers New Mask

Layers from Image.  Scroll down to find your mask and click on it and then click OK.

Layers Merge, Merge Group.

Image Resize 600X525 (the whole tag) Resize all layers checked and hit OK.

Open LHD_IB_ICalandra-20-3-Ele4 and copy and paste as a New Layer.  I moved

to the left under the rose layer.

Open LHD_IB_ICalandra-20-3-Ele15 and copy and paste as a New Layer.  I moved

behind the bottom tube layer and made it look like the tube had wings.  Yes I know 

there is an antenna showing.  Just carefully erase it with your eraser tool!

Layers Merge, Merge Visible.

Add Your ©copyright and license information and your name!