PTU- Sea Nymph Forum Tag

PTU - Sea Nymph

Tube of choice - I am using a STUNNING close up tube 

by Caron Vinson.  You can purchase this and other

LOVELY artwork at CDO.

Scrapkit used is called Cruise by Hungry Hill. (Thank 

You sooo much for letting me use your kit Alison!  It

is GORGEOUS!)  You can purchase this and other GREAT

scrapkits at CDO.

Font used is a FTU font called Notera.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open paper-4 and copy and paste as a New Layer.  Activate

your bottom layer, Selections Select All, Activate your

paper layer, Image Crop to Selection.

Open clouds and copy and paste as a New Layer.  I moved the 

bottom cloud up toward the top of the tag.  Activate

your bottom layer, Selections Select All, Activate your

Cloud layer, Image Crop to Selection.

Open horizon-sun and copy and paste as a New Layer.  I 

moved under the cloud layer.  Activate your bottom layer,

Selections Select All, Activate your Sun layer, Image Crop 

to Selection.

Open sand and copy and paste as a new layer.  I moved to 

the bottom of the tag.  Activate your bottom layer, 

Selections Select All, Activate your sand layer, Image 

Crop to Selection.

Open splashes and copy and paste as a New Layer.  I moved 

to the bottom of the tag where the sand ends.  Activate

your bottom layer, Selections Select All, Activate your

splashes layer, Image Crop to Selection.

Open beach_grass_1, Image Resize 150X82, Image Flip and

copy and paste as a New Layer.  I moved to the bottom 

right hand side of the tag.  Layers Duplicate and I moved

it up a touch and further tight.  Layers Merge, Merge Down.

Activate your bottom layer, Selections Select All, Activate 

your Beach Grass 1  layer, Image Crop to Selection.

Open beach_grass_2, Image Resize 150X150 and copy and paste 

as a New Layer.  I moved to the left hand side of the tag.

Activate your bottom layer, Selections Select All, Activate your

beach grass 2 layer, Image Crop to Selection.

Open fence, Image Resize 600X240 and copy and paste as a

New Layer.  I moved down a touch.  Activate your bottom 

layer, Selections Select All, Activate your fence layer, 

Image Crop to Selection. Move behind the beach grass 1 layer.

Open lighthouse, Image Resize 39X150 and copy and paste as

a New Layer.  I moved behind the fence layer.  Add a drop

shadow.

Open net, Image Resize 150X150 and copy and paste as a New

Layer.  I put it on the fence.

Open gull, Image Resize 150X80 I moved to the upper left hand 

side of the tag.

Open your tube of choice.  I used the close up of the tube.

Copy and paste as a New Layer.  If need be, Activate

your bottom layer, Selections Select All, Activate your

tube layer, Image Crop to Selection.

Layers Mege, Merge Visible.

Layers New Raster Layer.  Flood fill with black.  Selections

Select All Selections float/Defloat. Selections Modify 

Contract 4 and hit the delete key once on your keyboard. 

Adjust Blur Gaussian Blur 3.00 and hit OK.

Layers New Raster Layer and flood Fill with a Light Color.

I used #e3dbc1 but you want to use what goes best with your

tag.  Selections, Select All Selections float/Defloat. 

Selections Modify Contract 3 and hit the delete key once 

on your keyboard.  Selections Select None. Now with your 

eraser tool find a brush that is different and use that 

to erase some of the white on the frame.

Add your ©copyright information and Name.

PTU-Gothic

PTU-Gothic

I am using the GORGEOUS artwork of Anna Marine and the matching Scrapkit by Foxy's Designz (Ann, Thank You so much for allowing me to use this STUNNING kit!)  You can purchase this Bundle kit at CDO.

I used 2 different masks by Moonbeams and Spiderwebs.

MBandSWMask64 and MBandSWMask50.

Font used is a FTU font called Queen of the Moon

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a Transparent New Image, 800X700.

Open your tube and copy and paste as a New Layer.

Open Frame7_FD and copy and paste as a New Layer.

Move below your tube layer and position your tube

to where it looks good to you.  Add a drop shadow 

to your tube and frame layer.

With your magic wand click inside the frame layer.

Selections Modify Expand 5.  Open Paper5_FD and 

Copy and Paste as a New Layer.  Move below the 

frame layer.  Selections Invert and hit the delete

key once on your keyboard.  Selections Select None.

With your tube layer active (So you can see) Open 

Element9_FD and copy and paste as a New Layer.  I

moved to the upper right hand side of the frame and

moved below the paper layer.  Add a drop shadow.

Open Element1-FD (With the tube layer activated) and

Cope and Paste as a New Layer.  I moved it to the

upper right hand side and moved it down so it was on 

top of the leaves layer. Add a drop shadow.

Open Element28_FD, Image Mirror, Image Flip and copy

and paste as a New Layer.  I moved to the lower left

hand side of the frame and moved it down under the 

paper layer.  Add a drop shadow.

Open Element2_FD and copy and paste as a New Layer.

I moved to the bottom left hand side of the frame and

moved it down under the paper layer. Add a drop shadow.

Open Element36_FD and copy and paste as a New Layer.

I moved to the lower left hand side of the frame and 

moved under the lacey leaves layer.  Add a drop shadow.

Open Element23_FD and copy and paste as a New Layer.

I moved to the upper left hand side of the frame and 

moved under the paper layer.  There might be a little 

bit hanging under the tag, just use your eraser tool 

to get rid of it. Add a drop shadow.

With your very bottom layer active, Open Paper7_FD and

Copy and Paste as a New Layer.  Open MBandSWMask64 and

with that paper layer active, Layers New Mask Layer 

From Image, Scroll to find the mask and hit OK.  Layers

Merge Merge Group.

With that Masked layer active, Open Paper12_FD and

Copy and Paste as a New Layer.  Open MBandSWMask50 and

with that paper layer active, Layers New Mask Layer

From Image, Scroll to find Mask 50 and hit OK.  Layers

Merge Merge Group.

With your top layer active, Open WordArt1_FD, Image 

Resize 300X109 and copy and paste as a New Layer.

I moved to the bottom right hand side of the tag.

Add your ©copyright information and name.

Enjoy!

PTU-Apocalyptic

PTU-Apocalyptic

Tube of choice - I am using the BEAUTIFUL artwork of Dirk Richter.  You can 

purchase this and other GORGEOUS artwork at CDO.

Scrapkit used - I used the HAUNTING scrapkit called Inspired by Anna Marine

March 2012-BT by Chi Chi Designz (OMG Cindy!  I absolutely ADORE this kit!

Thank You for allowing me to use it!) You can purchase this and other STUNNING

Scrapkits at CDO.

Mask used is Mask 44 by Moonbeams and Spiderwebs.

Font used is a FTU font called Dark Roast.

~~~~~~~~~~~~~~~~~~~

Open an 800X700 Transparent New Image.

Open Frame1 and copy and paste as a New Layer.

Open Paper2 and copy and paste as a New Layer.  Move behind the frame and

I moved it down so the moon was in the frame.  Activate the frame layer and with 

your Magic Wand Toll click on the inside of the frame.  Layers Modify Expand 3

and hit OK.  Selections Invert and hit the delete key once on your keyboard.

Selections Select All and click on the paper layer to activate it, Image Crop to

Selection.  I lowered the opacity on the paper layer.  You can do a little, a lot or 

none at all.  It's your choice!

Open GrassSkulls and copy and paste as a New Layer. Move to just above the 

paper layer.  Activate the paper layer and with your Magic Wand Tool click in the

middle of the paper.  Activate the GrassSkulls, Selection Invert and hit the delete

key once on your keyboard.

Open your tube and copy and paste as a New Layer.  Move to the top and I moved

it to the right so it looks like it is sitting on the frame.

Open Buzzard, Image Resize 150X207 and copy and paste as a New Layer.

I moved to the upper left hand side of the frame.

Open Tree2, Image Mirror and copy and paste as a New Layer.  I moved under

the paper layer to the right.  With your Eraser Tool erase the part that is hanging 

under the tube and frame.

With your paper layer active, Open Windmill, Image Mirror and copy and paste as 

a New Layer.  I moved to the left hand side of the paper/frame.  Activate your paper

layer, With you Magic Wand click the paper layer, Selections Invert, Activate the 

Windmill layer and hit the delete key once on your keyboard.  Selections Select 

None.

Open Woodelement and copy and paste as a New Layer.  I moved to the upper

left hand side and moved below the tree layer.  Layers Duplicate Image Mirror

Image Flip and then layers merge down.  Activate your paper layer and with your

Magic Wand click the middle of it activate the Woodelement layer and hit the delete

key once on your keyboard.

Open Paper6 and copy and paste as a New Layer.  Move to the bottom.  Open

you mask.  If you used the same as I did Image Mirror.  Layers New Mask Layer

from Image and scroll to find the mask and hit OK.

Layers Merge, Merge Visible.

Add your ©copyright information and License for the tube

Add Name.

Enjoy!

PTU Sacred Ground Timeline

PTU - Sacred Ground Timeline

Tube of Choice - I am using the STUNNING Artwork of Vinegar.  You can purchase

this and other BEAUTIFUL Artwork at CDO.

Scrapkit used is Inspired By Kurama Phoenix 5-2 by Schnegge's Scraps. (Such a 

BEAUTIFUL kit Angela!  Thank You for letting me use it!)  You can purchase this

and other GORGEOUS scrapkits at CDO.

Font used is a FTU font called Brev Script.

Filters used are Xero-Bad Dream, Greg's Factory Output Volume II-Spotlight and 

one that comes with PSP Mosaic-Antique.

~~~~~~~~~~~~~~~~~~~

Open an 851X315 Transparent New Image.  Open Paper05_IBphoenix5_2_Schnegge.

Image Resize 900X900 and copy and paste as a New Layer.  Activate your bottom

layer, Selections Select All, Activate your paper layer, Image Crop to Selection.

Open your tube of choice and copy and paste as a New Layer.  I moved down from

the center.  Once you have the tube where you like her, Activate your bottom layer, 

Selections Select All, Activate your tube layer, Image Crop to Selection.

Open Element02_IBphoenix5_2_Schnegge, Image Resize to 100X171 and copy

and paste as a New Layer.  I moved to the right a bit and down so the base isn't

showing.  Activate your bottom layer, Selections Select All, Activate your cross 

layer, Image Crop to Selection.

Open Element10_IBphoenix5_2_Schnegge, Image Resize 310X315 and copy 

and paste as a New Layer.  I moved to the upper right hand corner of the tag.

Activate your bottom layer, Selections Select All, Activate your branch layer, Image 

Crop to Selection.

Open Element11_IBphoenix5_2_Schnegge, Image Resize 310X250, and copy 

and paste as a New Layer.  I moved under the branch layer and to the upper right 

hand side of the tag.  Activate your bottom layer, Selections Select All, Activate your 

leaves layer, Image Crop to Selection.

Open Element12_IBphoenix5_2_Schnegge, Image Rotate Clockwise 90 and copy 

and paste as a New Layer.  I moved behind the tube layer so it looks like a tree

behind her.  Layers Duplicate and the bottom layer of this I did Adjust Blur Gaussian

Blur 3.0 and hit OK.  Activate the top layer and then Layers Merge, Merge Down.

Activate your bottom layer, Selections Select All, Activate your doodle/tree layer, 

Image Crop to Selection.

Open Element03_IBphoenix5_2_Schnegge, Image Resize 310X290 and copy

and paste as a New Layer.  I moved toward the bottom right hand side of the tag

and moved so was just above the cross layer.  Activate your bottom layer, Selections 

Select All, Activate your thorns layer, Image Crop to Selection.

Open Element08_IBphoenix5_2_Schnegge and copy and paste as a New Layer.

I moved to the bottom right hand side of the tag and below the cross layer.  Activate 

your bottom layer, Selections Select All, Activate your rose layer, Image Crop to 

Selection.

Open Element04_IBphoenix5_2_Schnegge, Image Resize 310X336 and copy 

and paste as a New Layer.  I moved behind the tube layer and down so it looks like 

the tube has wings.  Activate your bottom layer, Selections Select All, Activate your 

statue layer, Image Crop to Selection.  A little bit of statue might be showing.  Just 

use you eraser tool to erase it.

Open Element09_IBphoenix5_2_Schnegge and copy and paste as a New Layer.

I moved behind the tube layer and down and to the right between the tube and the

cross.  Activate your bottom layer, Selections Select All, Activate your flower layer, 

Image Crop to Selection.

Open Element15_IBphoenix5_2_Schnegge and copy and paste as a New Layer.

I moved behind the tube layer so it kind of acts like a halo around the body.

Activate your bottom layer, Selections Select All, Activate your feather layer, Image 

Crop to Selection.

With your very top layer active, Open Paper06 and copy and paste as a New Layer.

Activate your bottom layer, Selections Select All, Activate your top paper layer, 

Image Crop to Selection.  Selections Select All, Selections Modify, Expand 3 and 

hit the delete key once on your keyboard.  Selections Select All, Selections Float

Selections Defloat Selections Modify Expand 1, Add a New Raster Layer under the

frame layer and Flood Fill with a dark color.  Adjust Blur Gaussian Blur 3.0 and hit

OK on your keyboard.  I then did the Greg's Factory Output Volume II-Spotlight on the top.

Add your ©copyright information and Name.

What I did with the name is, once you have the name down, Selections Select All,

Selections float/defloat, Add a New layer under it and flood fill with a dark color,

Selections Select None.  I then did the Gaussian Blur and then layers duplicate

and on the bottom layer did the Effects, Texture Effects, Mosaic Antique.