Sunday, August 11, 2013

PTU-Hugs and Kisses


PTU-Hugs and Kisses

Tube and Scrapkit-I am using the ADORABLE artwork
of Elisabeth Bell Package 3 and the GORGEOUS Scrap
Kit by LadyHawwk Designs *Thank You so much Cathy!*
You can purchase this at CDO.

Fonts used:  For the Word Art I used Free Sketching (Free Demo)
and for LadyHawwk's Name I use KG True Colors.

~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open LHD_Bell-Pack-3-Paper16 and copy and paste as a New Layer.  I moved 
down a bit.  Activate your bottom layer, Selections Select All, Activate your paper
layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer.  I moved to the left hand corner
of the tag.  Activate your bottom layer, Selections Select All, Activate your tube
layer, Image Crop to Selection.  Add a drop shadow.

Open LHD_Gell-Pack-3-Ele45 and copy and paste as a New Layer.  Move behind
the tube layer and down a bit.  Activate your bottom layer, Selections Select All, Activate 
your tree layer, Image Crop to Selection.  Add a drop shadow.

Open LHD_Bell-Pack-3-Ele47 and copy and paste as a New Layer.  I moved into
the upper right hand corner and below the tree layer.  Activate your bottom layer, 
Selections Select All, Activate your sun layer, Image Crop to Selection.

Open LHD_Bell-Pack-3-Ele48, Image Resize 78X255 and copy and paste as a 
New Layer.  I moved behind the tree layer and up a bit.  Activate your bottom layer, 
Selections Select All, Activate your swing layer, Image Crop to Selection.  Add a
drop shadow.

Open LHD_Bell-Pack-3-Ele80, Image Resize 323X225 and copy and paste as a 
New Layer.  I move just behind the tube layer and down so just the top rail is showing
and I move to the bottom left hand corner of the tag.  Add a drop shadow.  Layers
Duplicate Image Mirror.  Layers Merge Merge Down.  Activate your bottom layer, 
Selections Select All, Activate your fence layer, Image Crop to Selection.

Open LHD_Bell-Pack-3-Ele11 and copy and paste as a New Layer.  I moved to the
bottom right hand side of the tag and behind the tube layer so it looks like it is on
the fence.  Layers Duplicate Image Flip.  I move this to the bottom left hand side of 
the tag.  Layers Merge Merge Down.  Activate your bottom layer, Selections Select 
All, Activate your vine layer, Image Crop to Selection.  Add a drop shadow.

Open LHD_Bell-Pack-3-Ele10, Image Resize 200X149 and copy and paste as a 
New Layer.  I moved to the bottom right hand side and just below the tube layer.
Activate your bottom layer, Selections Select All, Activate your flower1 layer, Image 
Crop to Selection.  Add a drop shadow.

Open LHD_Bell-Pack-3-Ele17, Image Resize 200X117 and copy and paste as a 
New Layer.  I moved to the bottom left hand side of the tag and behind the tube
layer.  Activate your bottom layer, Selections Select All, Activate your flower2 layer, 
Image Crop to Selection. Add a drop shadow.

Open LHD_Bell-Pack-3-Ele46 and copy and paste as a New Layer.  I moved below
the tube layer and up on the tag.   Activate your bottom layer, Selections Select All, 
Activate your banner layer, Image Crop to Selection.  Add a drop shadow.

Activate your paper layer, Layers Duplicate.  Now move the duplicated layer to the
top (Layers, Arrange, Move to top).  Selections Select All, Selections Modify Contract
3.  Hit OK.  Hit the delete key once on your keyboard.  Selections Select None.
At this point you could put a drop shadow on this or do what I did.  Selections Select
All, Selections Float/DeFloat, Add a New Layer under the frame layer and flood fill
with black.  Selections Select None.  With your flood filled frame still active, Adjust 
Blur Gaussian Blur 3.0.

What I did was make up a little saying about Teddy Bear Kisses and Hugs using the
Free Sketching font.

Add your ©copyright and Licensing Information and Name.

Sunday, July 28, 2013

PTU-Love and Smooches


PTU-Love and Smooches

Tube of choice-I am using the GORGEOUS artwork of Jessica Dougherty.
To purchase this and other artwork visit CDO.

Scrap Kit used is Dark Heart by Honored Scraps *Such a BEAUTIFUL Kit
Patty!  Thank You so much!* You can purchase this kit at CDO.

Font used is a FTU font called Plaster of Paris

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open Paper_05 and copy and paste as a New Layer.  I move up to get some
of the glitter at the bottom of the paper in the tag.  Activate your bottom layer,
Selections Select All, Activate your paper layer, Image Crop to Selection.

Open WordArt_02 and copy and paste as a New Layer.  I moved to the right 
hand side of the tag.  Layers Duplicate.  With your move tool, move to the
left hand side of the tag.  Layers Merge Merge Down.  Activate your bottom 
layer, Selections Select All, Activate your word art layer, Image Crop to Selection.

Open your tube (I used the close up one) and copy and paste as a New Layer.
I move just off center (to the right) of the tag.  Activate your bottom layer,
Selections Select All, Activate your tube layer, Image Crop to Selection.

Open Element_20 and copy and paste as a New Layer.  I moved to the right
hand side of the tag and down and below the tube layer.  Layers Duplicate
Image Mirror and Flip.  Layers Merge, Merge Down.  Activate your bottom 
layer, Selections Select All, Activate your fence layer, Image Crop to Selection.

Open Element_18 and copy and paste as a New Layer.  I moved under the
tube layer and to the upper right hand corner of the tag.  Effect Edge Effects
Enhance More.  Activate your bottom layer, Selections Select All, Activate 
your chandelier, Image Crop to Selection.

Open Element_24 and copy and paste as a New Layer.  Add a drop shadow
and move under the tube layer and into the upper left hand corner.  Layers 
Duplicate and move to another part of the left hand.  Layers Merge Merge 
Down.  Activate your bottom layer, Selections Select All, Activate your flower
layer, Image Crop to Selection.

Open Element_28 and copy and paste as a New Layer.  Add a drop shadow
and move into the upper left hand corner and below the other flower layer.
Activate your bottom layer, Selections Select All, Activate your pink flower 
layer, Image Crop to Selection.

Open Element_47 and copy and paste as a New Layer.  I moved to the bottom
righ hand side of the tag and below the tube layer.  Activate your bottom layer,
Selections Select All, Activate your leaves layer, Image Crop to Selection.

Open Element_25 and copy and paste as a New Layer.  I moved to the bottom
right hand side of the tag and moved down above the leaves layer.  Activate 
your bottom layer, Selections Select All, Activate your rose layer, Image Crop 
to Selection.

Open Element_54 and copy and paste as a New Layer.  I moved down and
below the tube layer. Activate your bottom layer, Selections Select All, Activate 
your ribbon layer, Image Crop to Selection. Layers Duplicate and I move 
one copy down to above the fence layer.  With your top ribbon layer active, 
use the eraser tool to erase what is showing on the flower and leaves.

With your top layer active, Open Paper_02 and copy and paste as a New 
Layer.  Activate your bottom layer, Selections Select All, Activate your top 
paper layer, Image Crop to Selection.  Selections Select All, Selections
Float/Defloat, Selections Modify Contract 3 and hit OK. Hit the Delete Key
once on your keyboard.  Selections Select None.

Layers Merge Visible.

Add your ©copyright and Licensing Information and Name.

Thursday, July 25, 2013

PTU-Beauty has no color


PTU-Beauty has no color

Tube of choice- I am using the BEAUTIFUL artwork of Anna Marine.  You
can purchase this and other artwork at CDO.

Scrap Kit used is called Inspired by Jennifer Janesko 157-1 by Foxys Designz.
*Thank You so much Ann!  GORGEOUS kit!*  You can purchase this and
other Scrap Kits by Foxy at CDO.

Font used is a FTU Font called Penabico

~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open Paper4_FD and copy and paste as a New Layer.  Activate your bottom
layer, Selections Select All, Activate your paper layer, Image Crop to Selection.

Open your tube of choice and copy and paste as a New Layer.  I moved to
the right hand side.  Activate your bottom layer, Selections Select All, Activate
your paper tube, Image Crop to Selection.

Open Element5_FD and copy and paste as a New Layer.  I moved below
the tube layer and to the right a bit.  Activate your bottom layer, Selections 
Select All, Activate your mask layer, Image Crop to Selection.

Open Element16_FD and copy and paste as a New Layer.  I moved below
the tube layer and behind the tube layer.  Activate your bottom layer, Selections 
Select All, Activate your paper mirror, Image Crop to Selection.

Open Element15_FD and copy and paste as a New Layer.  I moved to the 
bottom of the tag and below the tube layer. Activate your bottom layer, 
Selections Select All, Activate your bow layer, Image Crop to Selection.

Open Element13_FD and copy and paste as a New Layer.  I moved to the
bottom left hand corner and below the bow layer.  Activate your bottom
layer, Selections Select All, Activate your rose layer, Image Crop to Selection.

Open Element17_FD and copy and paste as a New Layer.  I moved down 
so it is behind the knot in the bow and below the bow layer.  Activate your 
bottom layer, Selections Select All, Activate your key layer, Image Crop to 
Selection.

Open Element14_FD and copy and paste as a New Layer.  I moved below
the mirror layer and to the upper right hand side of the tag.  Activate your 
bottom layer, Selections Select All, Activate your white leaf layer, Image 
Crop to Selection.

Open Element6_FD and copy and paste as a New Layer.  to the right a bit
and below the rose layer.  Activate your bottom layer, Selections Select All, 
Activate your necklace layer, Image Crop to Selection.

Open Element11-FD Image Mirror and copy and paste as a New Layer.  I 
moved to the left a bit and moved down so it is just above the mask layer.
Activate your bottom layer, Selections Select All, Activate your black leaf 
layer, Image Crop to Selection.

Layers Merge, Merge Visible.

Add your ©copyright and Licensing Information and Name.





PTU-Evocation


PTU-Evocation

Tube of Choice-I am using the STUNNING artwork of Robin McQuay.  You 
can purchase this and other BEAUTIFUL artwork at Digital Chaos.

Scrap Kit used is called Rose of the Dragon by Foxy's Designz *Thank You
Ann!  GORGEOUS kit!!!*  You can purchase this and other BEAUTIFUL kits

Font used is a FTU font called Billion Stars.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open Paper3_FD and copy and paste as a New Layer.  Activate your bottom
layer, Selections Select All, Activate your paper layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer.  I moved to the middle
of the tag.  Activate your bottom layer, Selections Select All, Activate your 
tube layer, Image Crop to Selection.

Open Flower4_FD and copy and paste as a New Layer. I moved behind the
tube and down a bit.  Add a Dropshadow.  Activate your bottom layer, 
Selections Select All, Activate your flower 4 layer, Image Crop to Selection.

Open Pent_FD and copy and paste as a New Layer.  I moved behind the
tube layer and down a bit farther then the flower layer.  Add a Drop Shadow.
Activate your bottom layer, Selections Select All, Activate your pentagram, 
Image Crop to Selection.

Open Frame4_FD and copy and paste as a New Layer.  I moved behind the
tube layer and down about half way.  Activate your bottom layer, Selections 
Select All, Activate your frame layer, Image Crop to Selection.

Open Ribbon2_FD and copy and paste as a New Layer.  I moved below the
frame layer and to the right a bit.  Activate your bottom layer, Selections 
Select All, Activate your ribbon layer, Image Crop to Selection.

Open Rose3_FD and copy and paste as a New Layer.  I moved to the bottom
right hand corner of the tag and moved down so it is just above the paper
layer.  Activate your bottom layer, Selections Select All, Activate your rose3,
Image Crop to Selection.  Layers Duplicate.  Image Mirror.

Open Rose2_FD and copy and paste as a New Layer.  I moved down to just
above the paper layer.  Activate your bottom layer, Selections Select All, 
Activate your rose2 layer, Image Crop to Selection.

Open Cloud1_FD and copy and paste as a New Layer.  I moved down so
it is just peeking at the bottom of the ta.  Activate your bottom layer, Selections 
Select All, Activate your cloud layer, Image Crop to Selection.

The tube I am using has birds on a separate layer.  I used the smaller one
on the tag.

With your top layer active, Open Paper9_FD and copy and paste as a New
Layer.  Activate your bottom layer, Selections Select All, Activate your
 top paper layer, Image Crop to Selection.  With that top paper layer active,
Selections Select All, Selections Modify Contract 3 and hit OK.  Hit the delete 
key once on your keyboard.

Add a Drop Shadow to what you think needs a Drop Shadow.

Layers Merge, Merge Visible.

Add your ©copyright and Licensing information and Name.


Wednesday, July 17, 2013

PTU-Sweet Summertime


PTU-Sweet Summertime

Tube of Choice- I am using the GORGEOUS artwork of PinUpToons!  You 
can purchase this and other artwork at CDO.

Scrap Kit used is Inspired by PinUpToons 119-3 by Chi Chi Desingz (OMG
Cindy!  This kit is soooo BEAUTIFUL!  Thank You sooo much!)  You can
purchase this and other Scrap Kits at CDO.

Font used is called LD Jilly Nilly

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open your tube and copy and paste as a New Layer.  I moved to the left
hand side of the tag.  Activate your bottom layer, Selections Select All,
Activate your tube layer, Image Crop to Selection.

Open Paper3 and copy and paste as a New Layer.  Move below the tube
layer. Activate your bottom layer, Selections Select All, Activate your paper 
layer, Image Crop to Selection.

Open Brush and copy and paste as a New Layer.  Move behind the tube 
layer and down so the top of it is at the top of the tag and move so it is in
the middle.  Activate your bottom layer, Selections Select All, Activate your 
Brush layer, Image Crop to Selection.  Layers Duplicate Image Mirror.

Open Circles and copy and paste as a New Layer.  I moved behind the 
tube layer and slightly to the left and down so it looks kinda like she is 
relaxing on it.  Activate your bottom layer, Selections Select All, Activate 
your circle layer, Image Crop to Selection.

Open Clouds Image Flip and copy and paste as a New Layer.  I moved this 
below the tube layer and moved up and to the right.  Activate your bottom 
layer, Selections Select All, Activate your cloud layer, Image Crop to 
Selection.

Open Flower4 and copy and paste as a New Layer.  I moved behind the tube
layer and down.  Activate your bottom layer, Selections Select All,Activate 
your flower layer, Image Crop to Selection.

Open Flowers and copy and paste as a New Layer.  I moved to the left hand
side of the tag and moved so it is right above the paper layer.  Activate your 
bottom layer, Selections Select All, Activate your Flowers layer, Image Crop 
to Selection.

Open Grass2 and copy and paste as a New Layer.  I moved this below the
tube layer and to the left so it looks like she is sitting on it.  Activate your 
bottom layer, Selections Select All, Activate your grass layer, Image Crop to 
Selection.

Open Sparkles and copy and paste as a New Layer.  I moved this below the 
tube layer and down and to the left a bit so it looks like fireflies in the grass.
Activate your bottom layer, Selections Select All, Activate your Sparkles 
layer, Image Crop to Selection.

Open Sun and copy and paste as a New layer.  I moved to the upper right
hand corner of the tag.  Activate your bottom layer, Selections Select All,
Activate your sun layer, Image Crop to Selection.

Open Light and copy and paste as a New Layer.  I moved to the upper right
hand side of the tag and moved it so that the bottom light orb is all that is 
showing.  Activate your bottom layer, Selections Select All, Activate your 
Light layer, Image Crop to Selection.

With your top layer active, Layers New Raster Layer, chose a dark color 
(I chose a color from her pants) and flood fill with that color.  Selections
Select All, Selections Float/ De Float, Selections Modify Contract 3 and hit
the delete key once on your keyboard.  Selections Select None.

Add your ©copyright and Licensing information and Name.

Thursday, July 11, 2013

PTU-Just Breathe


PTU-Just Breathe

Tube of Choice- I am using the GORGEOUS Artwork of Jessica Dougherty.
You can purchase this and other artwork at CDO.

Scrap kit used is called So Emotional by Honored Scraps *Thank You so
much Patty!!!  This kit is just BEAUTIFUL!*  You can purchase this and 
other Scrap Kits at CDO.

Font used is a FTU font called Bulgaria Moderna v3

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open Paper_02 and copy and paste as a New Layer.  Activate the bottom
layer, Selections Select All, Activate the paper layer, Image Crop to Selection.

Open your tube of choice and copy and paste as a New Layer.  I moved
to the right hand side of the tag. Activate the bottom layer, Selections Select 
All, Activate the tube layer, Image Crop to Selection.

Open Element_10 and copy and paste as a New Layer. I moved to the upper
right hand side of the tag and below the tube layer.  Activate the bottom
layer, Selections Select All, Activate the bow layer, Image Crop to Selection.

Open Element_21, Image Mirror and copy and paste as a New Layer.  I 
moved to the bottom left hand side of the tag.  Activate the bottom layer, 
Selections Select All, Activate the cloud layer, Image Crop to Selection.

Open Element_47 and copy and paste as a New Layer.  I moved this up and
slightly to the right and below the bow layer.  Activate the bottom layer, 
Selections Select All, Activate the moon layer, Image Crop to Selection.

Open Element_20 and copy and paste as a New Layer.  I moved this below
the moon layer and up and to the left.  Activate the bottom layer, Selections 
Select All, Activate the fence layer, Image Crop to Selection.

Open Element_38 amd copy and paste as a New Layer.  I moved this up so
just a few stars are showing and moved to just above the moon layer.
Activate the bottom layer, Selections Select All, Activate the scatter layer, 
Image Crop to Selection.  Layer Duplicate, Image Flip Image Mirror.

With your top layer active we are gonna make a frame.

Re Open Paper_02 and copy and paste as a New Layer.  Activate your
tube layer, Selections Select All, Activate your paper layer, Image Crop to
Selection.  Selections Select All, Selections Modify Contract 3 and hit OK.
Hit the delete key once on your keyboard.  Selections Select None.

Layers Merge Merge Visible.

Add your ©copyright and Licensing Information and Name

Sunday, July 7, 2013

PTU-Too Cute


PTU-Too Cute

Tube of Choice-I am using the artwork of Pin Up Toons. You can purchase
this and other WONDERFUL tubes at CDO.

Scrap kit used is called Inspired By Pin Up Toons 162-3 by Tammy Kat
Dezigns *Love this kit Tammy!!!  Thank You sooo much!*  You can purchase
this and other scrap kits at CDO.

Font used is a FTU font called Janda Closer to Free.

~~~~~~~~~~~~~~~~~~~~~~~~

Open a 800X700 Transparent New Image.

Open ScrapTK_IB-PinUpToons-162-3-frame1b Image Rotate Clockwise 90
and copy and paste as a New Layer.

With your bottom layer active, Open ScrapTK_IB-PinUpToons-162-3-paper1
and copy and paste as a New Layer.  Activate your frame layer and with your
magic wand click on the inside of it.  Selections Modify Expand 10.  Selections
Invert, Activate your paper layer and hit OK  Selections Select None.

Open your tube (I used full body) and copy and paste as a New Layer.

At this point you may need to move your frame/paper or tube around.

Open ScrapTK_IB-PinUpToons-162-3-element1 and copy and paste as a 
New Layer.  Move to the bottom of the frame to the right and under the
paper layer.  add a slight drop shadow.  Layers Duplicate, Image Mirror.

Might need to use your mover tool to move the frame/paper and tube around.

Open ScrapTK_IB-PinUpToons-162-3-element5 and copy and paste as a
New Layer.  I moved to the upper right hand corner of the frame and below
the paper layer.

Open ScrapTK_IB-PinUpToons-162-3-element 7b and copy and paste as a
New Layer.  I moved up so it was on the white flower and below the paper
layer.

Open ScrapTK_IB-PinUpToons-162-3-element7 and copy and paste as a 
New Layer.  Image Rotate Free Rotate Left Free: 15 and hit OK.  Move up 
so it is next to the other flag and just above it.

Open ScrapTK_IB-PinUpToons-162-3-element7a and copy and paste as a 
New Layer.  Image Rotate Free Rotate Left Free: 30 and hit OK.  Move up
so it is next to the flag you just did and just above it.

With your paper layer active, Open ScrapTK_IB-PinUpToons-162-3-element16a
and copy and paste as a New Layer.  Move to where you like it.  Activate
your paper layer again, Selections Select All Selections Float/Defloat
Selections Invert, Activate the heart layer and hit the delete key once on 
your keyboard.  Don't De Select yet!

With your heart layer active, Open ScrapTK_IB-PinUpToons-162-3-element
6b and copy and paste as a New Layer.  I moved down and below the heart 
layer.  Hit the delete key once on your keyboard.  Selections Select None.

Open ScrapTK_IB-PinUpToons-162-3-element 4 and copy and paste as a
New Layer.  I moved below the heart balloon layer and to the left hand side
of the tag by the last flag.

With your top layer active, Open ScrapTK_IB-PinUpToons-162-3-element2
and copy and paste as a New Layer.  Image Rotate Free Rotate Left Free:30
and Hit OK.  I moved this to the upper left hand side of the frame.

Open ScrapTK_IB-PinUpToons-162-3-element9 and copy and paste as a
New Layer.  I moved to the upper right hand corner of the frame and moved 
below the tube layer.

Open ScrapTK_IB-PinUpToons-162-3-element10 and copy and paste as a
New Layer.  I moved to the bottom left hand corner of the frame.

Open ScrapTK_IB-PinUpToons-162-3-element8 and copy and paste as a 
New Layer.  I moved to the upper left hand corner of the frame above the
ribbon layer.

Add a slight drop shadow to all your elements and frame.

Layers Merge Merge Visible.

Image Resize 600X525

Add your ©copyright and licensing information.

Here is what I did with the name,  I typed it out in all white and converted to
Raster Layer.  Selections Select All Selections Float/DeFloat Selections
Modify Contract 2 and then open a paper of your choice (I used paper2)
and copy and paste as a New Layer, Selections Invert and hit the delete
key once on your keyboard.  I added a drop shadow to the white name.

Tuesday, July 2, 2013

PTU-Medusa's Lament

PTU-Medusa's Lament

Tube and Scrap Kit used is Gaetano Di Falco's Package 17 and matching
Scrap Kit by Abstract Creations *Thank You Cassie!  This kit is GORGEOUS!*
You can purchase this Bundle Pack at CDO.

Mask used is Mask 56 by Moonbeams and Spiderwebs.

Font used is a FTU font called Dark Roast.

~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open an 800X700 Transparent New Image.

Open your tube and copy and paste as a New Layer.

Open e12 and copy and paste as a New Layer. Move behind your tube 
layer and down so part of the water is below the bottom of the tube.

Open e56, Image Resize 238X225, copy and paste as a New Layer.  I moved
to the left of the tube and below the water layer.  Add a slight drop shadow.

Open e46 and copy and paste as a New Layer.  I moved below the flower 
layer.

Open e31 and copy and paste as a New Layer.  I moved down and below
the flower layer.  Add a slight drop shadow.

Open e19 and copy and paste as a New Layer.  I moved below the boulder
layer and to the right of the tube.  Add a slight drop shadow.

Open e3 and copy and paste as a New Layer.  I moved to the left hand side
of the tube and down so just above the glow layer.

Open e16, Image Resize 225X221, Copy and paste as a New Layer.  I moved
below the water layer and to the right of the tube toward the middle.

Open e29, Image Resize 166X225, Copy and paste as a New Layer.  I moved
to the right of the tube.

Open e26, Image Resize 108X104, Copy and paste as a New Layer. I moved 
to the right and down so it is resting at the bottom of the post.

With your bottom layer active, Open p5 and copy and paste as a New Layer.
Open your mask of choice, Layers New Mask Layer from Image and scroll
to find your mask and hit OK.  Layers Merge Merge Group.  I moved to the
bottom of the tag being careful not to go to far past the water.  Layers Duplicate
and I moved up toward the top of the tag being careful to not go to far past
the glow layer.

Layers Merge Merge Visible.

Image resize 600X525.

Add your ©copyright and Licensing Information and Name.


Monday, June 24, 2013

PTU-She walks in the Light


PTU-She walks in the light

Tube of Choice-I am using the artwork of Martin Abel.  You can purchase
this and other GORGEOUS artwork at CDO.

Scrap Kit used is Inspired by Vinegar 11-2 by Chi Chi Designz *OMG Cindy!
I absolutely LOVE this kit!*  You can purchase this and other Scrap Kits
at CDO.

Filter used is a FTU filter called VM Instant Art-Spiderweb.

Font used is a FTU font called Windshield Massacre.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open Paper2 and copy and paste as a New layer.  Activate the bottom layer
Selections Select All, Activate the paper layer, Image Crop to Selection.

Open Paper1 and copy and paste as a New Layer.  Activate the bottom layer
Selections Select All, Activate the top paper layer, Image Crop to Selection.
Effects Plug Ins VM Instant Art Spiderweb  I used the following settings:


So your paper went from looking like this:

To this:


Change the Opacity to Overlay.

Open BloodyHandBrush and copy and paste as a New Layer.  I moved to
the bottom right hand side of the tag and below the tube layer.  Lower the 
Opacity to 64.  Activate the bottom layer Selections Select All, Activate the 
hand layer, Image Crop to Selection.

Open Barbwire and copy and paste as a New Layer.  I moved behind the
tube layer and down.  Activate the bottom layer Selections Select All, 
Activate the barbwire layer, Image Crop to Selection.

Open Fog and copy and paste as a New Layer.  I moved to the left a bit.
Activate the bottom layer Selections Select All, Activate the fog layer, 
Image Crop to Selection.

Open Moon and copy and paste as a New layer.  I moved to the upper 
right hand corner.  Activate the bottom layer Selections Select All, Activate 
the moon layer, Image Crop to Selection.

Open Moss, Image Mirror, and copy and paste as a New Layer.  I moved to
the upper right hand side of the tag and below the tube layer.  Activate the 
bottom layer Selections Select All, Activate the moss layer, Image Crop to 
Selection.

Open ShatteredGlass and copy and paste as a New Layer.  I moved to the
upper right hand side of the tag and below the fog layer.  Activate the 
bottom layer Selections Select All, Activate the glass layer, Image Crop to 
Selection.

With your top layer active, Add a New Raster Layer and flood fill with a 
dark color.  Selections Select All, Selections Modify Contract 3 and hit the
delete key once on your keyboard.

Add your ©copyright and Licensing Information and Name.

Friday, June 21, 2013

PTU-Desire


PTU-Desire

Tube of choice-I am using the artwork of Anna Marine.  You can purchase
this and other GORGEOUS artwork at CDO.

Scrap Kit used is called A Green Desire by Hungry Hill *Such a BEAUTIFUL
Kit Alison!  Thank You!*.  You can purchase this at Treasured Scraps.

Mask used is MB and SW Forum Mask 32 by Moonbeams and Spiderwebs.

Font used is a FTU font called Susie's Hand by kevinandamanda

~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open paper-4 and copy and paste as a New Layer.  Activate the bottom 
layer, Selections Select All, Activate the paper layer, Image Crop to Selection.

Open paper-2 and copy and paste as a New Layer.Activate the bottom 
layer, Selections Select All, Activate the top paper layer, Image Crop to 
Selection.  Open your mask.  Layers New Mask From Image,  Scroll to find
your mask, Highlight it and hit OK.  Layers Merge Merge Group.

Open tube of choice and copy and paste as a New Layer.  I moved to the 
left hand side of the tag.  Activate the bottom layer, Selections Select All, 
Activate the tube layer, Image Crop to Selection.

Open frame-4 and copy and paste as a New Layer.  I moved to the left behind
the tube and down.  Activate the bottom layer, Selections Select All, Activate 
the frame layer, Image Crop to Selection.

Open window and copy and paste as a New Layer.  I moved to the left behind
the frame layer and down.  Activate the bottom layer, Selections Select All, 
Activate the window layer, Image Crop to Selection.

Open branch and copy and paste as a New Layer.  I moved to the bottom of
the tag and behind the window layer.  Activate the bottom layer, Selections 
Select All, Activate the branch layer, Image Crop to Selection.

Open sparkles-3 and copy and paste as a New Layer.  I moved to the right
hand side of the tag and just above the mask layer.  Activate the bottom 
layer, Selections Select All, Activate the sparkle layer, Image Crop to 
Selection.  Layers Duplicate Image Mirror/Flip.

Open vine-4 and copy and paste as a New Layer.  I moved to the far right 
hand side of the tag  and under the tube layer.  Activate the bottom layer, 
Selections Select All, Activate the vine layer, Image Crop to Selection.

Now for the frame,  Layers New Raster Layer, Choose a color (I chose a 
color from the window) and using your flood fill tool, fill with that color.
Selections Select all, Selections Float/Defloat, Selections modify contract
3 and hit ok.  You now have a frame that should be your top layer.  If it isn't
Layers Arrange Move to Top.

Layers Merge Merge Visible.

Add your ©copyright and Licensing Information.  Add Name.

Sunday, June 16, 2013

PTU-It had to be you


PTU-It had to be you

Tube of choice-  I am using the STUNNING artwork of Maxine Gadd.  You
can purchase this and other artwork at CDO.

Scrap Kit used is Inspired by Jennifer Janesko 155-3 By Schnegge's Scraps
*Such a BEAUTIFUL kit Angela!!!  Thank You so much!!!*  You can purchase
this and other kits at CDO.

Mask used is MB and SW Forum Mask 33 by Moonbeams and Spiderwebs.

Font used is a FTU font called Saturday Morning Hand.

~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open Paper02_IBjanesko155-3_Schnegge and copy and paste as a New Layer.  Activate the bottom
layer, Selections Select All, Activate the paper layer, Image Crop to Selection.

Layers New Raster Layer.  Flood Fill with a dark color.  I used #010101.

Now open your mask.  Layers New Mask Layer from Image, Scroll to find
your mask and hit OK.  Layers Merge Merge Group.  I made it a little darker
by doing Layers Duplicate.  Layers Merge Merge Down.

Open your tube and copy and paste as a New Layer.  I moved so she is 
just off center to the right.  Activate the bottom layer, Selections Select All, 
Activate the tube layer, Image Crop to Selection.  Layers Duplicate and on 
the top copy Adjust Blur Gaussian Blur 3.0 and hit OK.  Change the blend
mode to overlay.  I added a drop shadow to the bottom tube layer then 
activated the top tube layer and then Layers Merge Merge Down.

Open Element01_IBjanesko155-3_Schnegge and copy and paste as a New 
Layer.  I moved to the bottom right hand side of the tag and behind the tube
layer.  Activate the bottom layer, Selections Select All, Activate the flower 
layer, Image Crop to Selection.

Open Element02_IBjanesko155-3_Schnegge and copy and paste as a New 
Layer.   I moved to the right and below the flower layer.  Activate the bottom
layer, Selections Select All, Activate the ribbon layer, Image Crop to 
Selection.

Open Element04_IBjanesko155-3_Schnegge and copy and paste as a New
Layer.  I moved below the ribbon layer and moved to the bottom left hand
side of the tag.  Activate the bottom layer, Selections Select All, Activate the 
rose layer, Image Crop to Selection.

Open Element07_IBjanesko155-3_Schnegge and copy and paste as a New
Layer.  I moved this behind the tube layer and up toward the upper right
hand side of the tag.  Layers Duplicate and I moved this down to the bottom
left hand side of the tag and below the rose layer.  Activate the bottom
layer, Selections Select All, Activate the glow layer, Image Crop to Selection.

Open Element15_IBjanesko155-3_Schnegge and copy and paste as a New
Layer.  I moved this down a bit and below the ribbon layer.  Activate the 
bottom layer, Selections Select All, Activate the paper flower layer, Image 
Crop to Selection.

Open Element17_IBjanesko155-3_Schnegge and copy and paste as a New 
Layer.  I moved below the rose layer and down to the bottom left hand side
of the tag.  Activate the bottom layer, Selections Select All, Activate the 
jewel layer, Image Crop to Selection.

For the frame.  Open Paper05_IBjanesko155-3_Schnegge and copy and 
paste as a New Layer.  Activate the bottom layer, Selections Select All, 
Activate the top paper layer, Image Crop to Selection.  Selections Select All,
Selections Modify Contract 2 and hit OK and hit the delete key once on your
keyboard.  What I did is I added a New Raster Layer under the frame layer
and flood filled with the same color I used for the mask.  Did the same 
selections for the frame except I changed the number to 3.  I then did Adjust
Blur Gaussian Blur 3.0.

Add your ©copyright and Licensing information and Name.

Friday, June 14, 2013

PTU-Faded Memories


PTU-Faded Memories

Tube of Choice-I am using the BEAUTIFUL artwork of Susan McKirvergan.
You can purchase this and other artwork at UYA.

Scrap Kit used is called Faded Photographs by Hungry Hill.  You can 
purchase this and other BEAUTIFUL kits at Treasured Scraps. *Thank
You Alison!!!  This kit is GORGEOUS!*

Font used is a FTU Font called Janda Celebration Script.

Mask used is Mask 48 MB and SW by Moonbeams and Spiderwebs.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 800X700 Transparent New Image.

Open frame-1 and copy and paste as a New Layer.

Open your tube and copy and paste as a New Layer.  Move to where you
like it and move below the frame layer.  Layers Duplicate and move above
the frame layer.  With your eraser tool, erase what it showing below the 
frame and on the frame itself.  Repeat with the one below the frame layer.

With your frame layer active, use your magic wand and click on the inside
of each of the three picture frames.  Selections Modify Expand 10.  Open
paper-6 and copy and paste as a New Layer.  Move below the bottom
tube layer.  Selections Invert and hit the delete key once on your keyboard.

Open ribbon-2 and copy and paste as a New Layer.  I moved behind the
bottom tube layer and down of the tag.  With your magic wand, click the
frame behind the tube, Selections Modify Expand 10, Selections invert, 
activate the ribbon layer and hit the delete button once on your keyboard.
You might need to activate your bottom layer Selections Select All, activate
your ribbon layer and Image Crop to Selection.

Open squiggle-2 and copy and paste as a New Layer.  I moved to the right 
side frame and down below the frame layer.  With your magic wand, click the
frame on the right hand side, Selections Modify Expand 10, Selections invert, 
activate the squiggle-2 layer and hit the delete button once on your keyboard.
You might need to activate your bottom layer Selections Select All, activate
your squiggle layer and Image Crop to Selection.

Open time and copy and paste as a New Layer.  I moved to the left side of the 
frame and below the frame layer.  With your magic wand, click the
frame on the left, Selections Modify Expand 10, Selections invert, 
activate the pocket watch layer and hit the delete button once on your keyboard.
You might need to activate your bottom layer Selections Select All, activate
your time layer and Image Crop to Selection.

Open babies-breath and copy and paste as a New Layer.  I moved to the
right side frame and below the squiggles layer and down.  With your magic 
wand, click the right side frame, Selections Modify Expand 10, Selections 
invert, activate the babies breathe layer and hit the delete button once on
 your keyboard.  You might need to activate your bottom layer Selections 
Select All, activate your babies breathe layer and Image Crop to Selection.

Open berries and copy and paste as a New Layer.  I moved to the left hand
frame and below the pocket watch layer.  With your magic wand, click the
left hand frame, Selections Modify Expand 10, Selections invert, 
activate the berries layer and hit the delete button once on your keyboard.
You might need to activate your bottom layer Selections Select All, activate
your berries layer and Image Crop to Selection.

Open branch and copy and paste as a New Layer.  I moved to the left hand
frame and below the berries layer.  With your magic wand, click the
left side frame, Selections Modify Expand 10, Selections invert, 
activate the branch layer and hit the delete button once on your keyboard.
You might need to activate your bottom layer Selections Select All, activate
your branch layer and Image Crop to Selection.

Open flower-3 and copy and paste as a New Layer.  I moved to the corner
of the right side frame and moved below the frame.  With your magic wand, 
click the right side frame, Selections Modify Expand 10, Selections invert, 
activate the flower layer and hit the delete button once on your keyboard.
You might need to activate your bottom layer Selections Select All, activate
your flower layer and Image Crop to Selection.

Open leaves and copy and paste as a New Layer.  I move to the left hand
frame and below the branch layer.  With your magic wand, click the left 
side frame, Selections Modify Expand 10, Selections invert, activate the 
leaves layer and hit the delete button once on your keyboard.
You might need to activate your bottom layer Selections Select All, 
activate your leaves layer and Image Crop to Selection.

With the very bottom layer active, Open paper-15 and copy and paste as a
New Layer.  Open your mask,  I Rotated mine, and with the paper layer 
active, Layers New Mask Layer from image, scroll to find your mask and 
hit ok.  Layers Merge Merge Group.  I made sure it is in the middle and 
just a little showing for a pop of color.

Layers Merge Merge Visible.

I like my tags no bigger than 600X 600 so with this I resized to 600X525.

Add your ©copyright and Licensing information and Name.

When saving remember to save as a .png so you have no white background.

Sunday, June 9, 2013

PTU-Old Fashion Love Song


PTU-Old Fashion Love Song

Tube of choice- I am using the BEAUTIFUL artwork of Jennifer Janesko.
You can purchase this and other artwork at CDO.

Scrap Kit used is called Inspired by Jennifer Janesko 27-3 by Foxys
Designz (I LOVE this Ann!  Thank You soooo much!)  You can purchase 
this and other BEAUTIFUL kits at CDO.

Font used is a FTU font called Marte

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open Paper4_FD and copy and paste as a New Layer.  Activate the bottom
layer, Selections Select All, Activate your paper Layer, Image Crop to
Selection.

Open tube of choice and copy and paste as a New Layer.  I left it in the 
middle and just brought it down on the tag.  Activate the bottom
layer, Selections Select All, Activate your tube Layer, Image Crop to
Selection.  Layers Duplicate.  On the top layer Adjust Blur Gaussian Blur
3.0.  Change the opacity to Overlay.

Open Frame1_FD and copy and paste as a New Layer.  I moved down on
the tag and below the bottom tube layer.  Activate the bottom
layer, Selections Select All, Activate your Frame Layer, Image Crop to
Selection.  

Open Element2_FD and copy and paste as a New Layer.  I moved slightly
to the left of the tube layer and down below the bottom tube layer.
Activate the bottom layer, Selections Select All, Activate your Flower Layer, 
Image Crop to Selection.  Layers Duplicate, Image Mirror.

Open Element4_FD and copy and paste as a New Layer.  I moved down to
just above the paper layer.  Activate the bottom layer, Selections Select All, 
Activate your Sparkle Layer, Image Crop to Selection.

Open Element7_FD and copy and paste as a New Layer.  I moved down a 
bit and above the sparkle layer.  Activate the bottom layer, Selections 
Select All, Activate your Doodle Layer, Image Crop to Selection.  Layers
Duplicate.  Adjust Blur Gaussian Blue 3.0.

Open Element15_FD and copy and paste as a New Layer.  I moved to the
upper left hand side of the tag and above the Doodle Layer.  Activate the 
bottom layer, Selections Select All, Activate your Branch Layer, Image Crop 
to Selection.

Open Element1_FD and copy and paste as a New Layer.  I moved below
the frame layer and to the left of the tube and down below the frame layer.  
Activate the bottom layer, Selections Select All, Activate your Flower1 Layer, 
Image Crop to Selection.

Open Element20_FD Image Flip and copy and paste as a New Layer.  I 
moved to the right hand side of the tube and below the frame layer.
Activate the bottom layer, Selections Select All, Activate your Flower2 Layer, 
Image Crop to Selection.

Open Element17_FD Image Flip and copy and paste as a New Layer. I 
moved this down and below the flowers.  Activate the bottom layer, 
Selections Select All, Activate your Doily Layer, Image Crop to Selection.

With your top layer active. Open Paper6_FD and copy and paste as a New 
Layer.  Activate the bottom layer, Selections Select All, Activate your top 
paper Layer, Image Crop to Selection.  Selections Select All, Selections
Float/Defloat, Selections Modify Contract 3 and hit the delete key once 
on your keyboard.  Selections Select None.

Add your ©copyright and Licensing information and Name.

Thursday, June 6, 2013

PTU-Party City


PTU-Party City

Tube of choice-I am using the GORGEOUS artwork of Gaetano Di Falco.
You can purchase this and other artwork at CDO.

Scrap Kit used is called Serenity by Abstract Creations *GORGEOUS kit 
Cassie!!!  Thank You!!!)*  You can purchase this and other Scrap Kits at
CDO.

Font used is a FTU font called Dominatrix.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open p2 and copy and paste as a New Layer.  Activate your bottom layer,
Selections Select All, Activate your paper layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer.  I moved to the left.
Activate your bottom layer, Selections Select All, Activate your tube layer, 
Image Crop to Selection.

Open e63 and copy and paste as a New Layer.  I moved behind the tube
layer and down.  Activate your bottom layer, Selections Select All, Activate 
your city layer, Image Crop to Selection.

Open e61 and copy and paste as a New Layer.  I moved to the upper right 
hand side of the tag and below the city layer.  Activate your bottom layer,
Selections Select All, Activate your splatter layer, Image Crop to Selection.

Open e47 and copy and paste as a New Layer.  I moved this up and to the
right and moved down to above the paper layer.  Activate your bottom layer,
Selections Select All, Activate your doodle layer, Image Crop to Selection.

Open e21 and copy and paste as a New Layer.  I moved this behind the
tube and the city and moved down above the paper layer.  Activate your 
bottom layer, Selections Select All, Activate your heart layer, Image Crop 
to Selection.

Open e15 and copy and paste as a New Layer.  I moved this below the tube
layer and to the right and down on the tag.  Activate your bottom layer,
Selections Select All, Activate your branch layer, Image Crop to Selection.

Open e30 and copy and paste as a New Layer.  I moved this below the
branch layer and played with it till I liked where it was.  Activate your bottom 
layer, Selections Select All, Activate your scatter layer, Image Crop to Selection.

To make the frame, Open p1 and copy and paste as a New Layer.  Activate 
your bottom layer, Selections Select All, Activate your top paper layer, Image
Crop to Selection.  Selections Select All, Selections Modify Contract 3 hit
OK and hit the delete key once on your keyboard.  Selections Select None.
I then Layers Duplicate and on the top frame Adjust Blur Gaussian Blur 3.0.

Layers Merge, Merge Visible.

Add your ©copyright and Licensing information and Name.

Monday, June 3, 2013

PTU-Abstract Beauty


PTU-Abstract Beauty

Tube and Scrapkit used is Enamorte Package 17 with the matching Scrap
Kit by Abstract Creations. *Thank You so much Cassie!  I LOVE this Kit!*
You can purchase the artwork and matching kit together at CDO.

Font used is a FTU font called Tamarind.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open p4 and copy and paste as a New Layer.  Activate the bottom layer,
Selections Select All, Activate the paper layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer.  I moved to the right
hand side of the tag.  Activate the bottom layer, Selections Select All, 
Activate the tube layer, Image Crop to Selection.

Open e17 and copy and paste as a New Layer.  I moved below the tube
layer and to the right.  Activate the bottom layer, Selections Select All, 
Activate the mist layer, Image Crop to Selection.

Open e2 and copy and paste as a New Layer.  Move down to just above
the paper layer.  Activate the bottom layer, Selections Select All, Activate 
the black sheet layer, Image Crop to Selection.

Open e4, Image Mirror and copy and paste as a New Layer.  I moved to the
upper left hand side of the tag.  Activate the bottom layer, Selections 
Select All, Activate the rose layer, Image Crop to Selection.

Open e12 and copy and paste as a New Layer.  I moved below the tube 
layer and down.  Activate the bottom layer, Selections Select All, Activate 
the flower layer, Image Crop to Selection.

Open e26 and copy and paste as a New Layer.  I moved below the tube
layer and to the right.  Activate the bottom layer, Selections Select All, 
Activate the walk way layer, Image Crop to Selection.

Open e32 and copy and paste as a New Layer.  I moved this down on the
tag and below the black sheet layer.  Activate the bottom layer, Selections 
Select All, Activate the music layer, Image Crop to Selection.

Open e35 and copy and paste as a New Layer.  I moved this up and to the
right a bit and under the music layer.  Activate the bottom layer, Selections 
Select All, Activate the lantern layer, Image Crop to Selection.

With your top layer active we are gonna make a frame.  Open p10 and copy
and paste as a New Layer.  Activate the bottom layer, Selections Select All, 
Activate the top paper layer, Image Crop to Selection.  Selections Select All,
Selections Modify Contract 3 and hit OK.  Hit the Delete button once on your
keyboard.  Selections Select None.  I duplicated this and on the bottom one
I did Adjust Blur Gaussian Blur 3.0 and hit OK.

Layers Merge Merge Visible.

Add your ©copyright information and Name.