Thursday, June 4, 2015

PTU- Sea Nymph Forum Tag



PTU - Sea Nymph

Tube of choice - I am using a STUNNING close up tube 
by Caron Vinson.  You can purchase this and other
LOVELY artwork at CDO.

Scrapkit used is called Cruise by Hungry Hill. (Thank 
You sooo much for letting me use your kit Alison!  It
is GORGEOUS!)  You can purchase this and other GREAT
scrapkits at CDO.

Font used is a FTU font called Notera.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open paper-4 and copy and paste as a New Layer.  Activate
your bottom layer, Selections Select All, Activate your
paper layer, Image Crop to Selection.

Open clouds and copy and paste as a New Layer.  I moved the 
bottom cloud up toward the top of the tag.  Activate
your bottom layer, Selections Select All, Activate your
Cloud layer, Image Crop to Selection.

Open horizon-sun and copy and paste as a New Layer.  I 
moved under the cloud layer.  Activate your bottom layer,
Selections Select All, Activate your Sun layer, Image Crop 
to Selection.

Open sand and copy and paste as a new layer.  I moved to 
the bottom of the tag.  Activate your bottom layer, 
Selections Select All, Activate your sand layer, Image 
Crop to Selection.

Open splashes and copy and paste as a New Layer.  I moved 
to the bottom of the tag where the sand ends.  Activate
your bottom layer, Selections Select All, Activate your
splashes layer, Image Crop to Selection.

Open beach_grass_1, Image Resize 150X82, Image Flip and
copy and paste as a New Layer.  I moved to the bottom 
right hand side of the tag.  Layers Duplicate and I moved
it up a touch and further tight.  Layers Merge, Merge Down.
Activate your bottom layer, Selections Select All, Activate 
your Beach Grass 1  layer, Image Crop to Selection.

Open beach_grass_2, Image Resize 150X150 and copy and paste 
as a New Layer.  I moved to the left hand side of the tag.
Activate your bottom layer, Selections Select All, Activate your
beach grass 2 layer, Image Crop to Selection.

Open fence, Image Resize 600X240 and copy and paste as a
New Layer.  I moved down a touch.  Activate your bottom 
layer, Selections Select All, Activate your fence layer, 
Image Crop to Selection. Move behind the beach grass 1 layer.

Open lighthouse, Image Resize 39X150 and copy and paste as
a New Layer.  I moved behind the fence layer.  Add a drop
shadow.

Open net, Image Resize 150X150 and copy and paste as a New
Layer.  I put it on the fence.

Open gull, Image Resize 150X80 I moved to the upper left hand 
side of the tag.

Open your tube of choice.  I used the close up of the tube.
Copy and paste as a New Layer.  If need be, Activate
your bottom layer, Selections Select All, Activate your
tube layer, Image Crop to Selection.

Layers Mege, Merge Visible.

Layers New Raster Layer.  Flood fill with black.  Selections
Select All Selections float/Defloat. Selections Modify 
Contract 4 and hit the delete key once on your keyboard. 
Adjust Blur Gaussian Blur 3.00 and hit OK.

Layers New Raster Layer and flood Fill with a Light Color.
I used #e3dbc1 but you want to use what goes best with your
tag.  Selections, Select All Selections float/Defloat. 
Selections Modify Contract 3 and hit the delete key once 
on your keyboard.  Selections Select None. Now with your 
eraser tool find a brush that is different and use that 
to erase some of the white on the frame.

Add your ©copyright information and Name.

















Thursday, May 14, 2015

PTU-Gothic


PTU-Gothic

I am using the GORGEOUS artwork of Anna Marine and the matching Scrapkit by Foxy's Designz (Ann, Thank You so much for allowing me to use this STUNNING kit!)  You can purchase this Bundle kit at CDO.


I used 2 different masks by Moonbeams and Spiderwebs.

Font used is a FTU font called Queen of the Moon

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a Transparent New Image, 800X700.

Open your tube and copy and paste as a New Layer.

Open Frame7_FD and copy and paste as a New Layer.
Move below your tube layer and position your tube
to where it looks good to you.  Add a drop shadow 
to your tube and frame layer.

With your magic wand click inside the frame layer.
Selections Modify Expand 5.  Open Paper5_FD and 
Copy and Paste as a New Layer.  Move below the 
frame layer.  Selections Invert and hit the delete
key once on your keyboard.  Selections Select None.

With your tube layer active (So you can see) Open 
Element9_FD and copy and paste as a New Layer.  I
moved to the upper right hand side of the frame and
moved below the paper layer.  Add a drop shadow.

Open Element1-FD (With the tube layer activated) and
Cope and Paste as a New Layer.  I moved it to the
upper right hand side and moved it down so it was on 
top of the leaves layer. Add a drop shadow.

Open Element28_FD, Image Mirror, Image Flip and copy
and paste as a New Layer.  I moved to the lower left
hand side of the frame and moved it down under the 
paper layer.  Add a drop shadow.

Open Element2_FD and copy and paste as a New Layer.
I moved to the bottom left hand side of the frame and
moved it down under the paper layer. Add a drop shadow.

Open Element36_FD and copy and paste as a New Layer.
I moved to the lower left hand side of the frame and 
moved under the lacey leaves layer.  Add a drop shadow.

Open Element23_FD and copy and paste as a New Layer.
I moved to the upper left hand side of the frame and 
moved under the paper layer.  There might be a little 
bit hanging under the tag, just use your eraser tool 
to get rid of it. Add a drop shadow.

With your very bottom layer active, Open Paper7_FD and
Copy and Paste as a New Layer.  Open MBandSWMask64 and
with that paper layer active, Layers New Mask Layer 
From Image, Scroll to find the mask and hit OK.  Layers
Merge Merge Group.

With that Masked layer active, Open Paper12_FD and
Copy and Paste as a New Layer.  Open MBandSWMask50 and
with that paper layer active, Layers New Mask Layer
From Image, Scroll to find Mask 50 and hit OK.  Layers
Merge Merge Group.

With your top layer active, Open WordArt1_FD, Image 
Resize 300X109 and copy and paste as a New Layer.
I moved to the bottom right hand side of the tag.

Add your ©copyright information and name.

Enjoy!





Wednesday, February 25, 2015

PTU-Apocalyptic


PTU-Apocalyptic

Tube of choice - I am using the BEAUTIFUL artwork of Dirk Richter.  You can 
purchase this and other GORGEOUS artwork at CDO.

Scrapkit used - I used the HAUNTING scrapkit called Inspired by Anna Marine
March 2012-BT by Chi Chi Designz (OMG Cindy!  I absolutely ADORE this kit!
Thank You for allowing me to use it!) You can purchase this and other STUNNING
Scrapkits at CDO.

Mask used is Mask 44 by Moonbeams and Spiderwebs.

Font used is a FTU font called Dark Roast.

~~~~~~~~~~~~~~~~~~~

Open an 800X700 Transparent New Image.

Open Frame1 and copy and paste as a New Layer.

Open Paper2 and copy and paste as a New Layer.  Move behind the frame and
I moved it down so the moon was in the frame.  Activate the frame layer and with 
your Magic Wand Toll click on the inside of the frame.  Layers Modify Expand 3
and hit OK.  Selections Invert and hit the delete key once on your keyboard.
Selections Select All and click on the paper layer to activate it, Image Crop to
Selection.  I lowered the opacity on the paper layer.  You can do a little, a lot or 
none at all.  It's your choice!

Open GrassSkulls and copy and paste as a New Layer. Move to just above the 
paper layer.  Activate the paper layer and with your Magic Wand Tool click in the
middle of the paper.  Activate the GrassSkulls, Selection Invert and hit the delete
key once on your keyboard.

Open your tube and copy and paste as a New Layer.  Move to the top and I moved
it to the right so it looks like it is sitting on the frame.

Open Buzzard, Image Resize 150X207 and copy and paste as a New Layer.
I moved to the upper left hand side of the frame.

Open Tree2, Image Mirror and copy and paste as a New Layer.  I moved under
the paper layer to the right.  With your Eraser Tool erase the part that is hanging 
under the tube and frame.

With your paper layer active, Open Windmill, Image Mirror and copy and paste as 
a New Layer.  I moved to the left hand side of the paper/frame.  Activate your paper
layer, With you Magic Wand click the paper layer, Selections Invert, Activate the 
Windmill layer and hit the delete key once on your keyboard.  Selections Select 
None.

Open Woodelement and copy and paste as a New Layer.  I moved to the upper
left hand side and moved below the tree layer.  Layers Duplicate Image Mirror
Image Flip and then layers merge down.  Activate your paper layer and with your
Magic Wand click the middle of it activate the Woodelement layer and hit the delete
key once on your keyboard.

Open Paper6 and copy and paste as a New Layer.  Move to the bottom.  Open
you mask.  If you used the same as I did Image Mirror.  Layers New Mask Layer
from Image and scroll to find the mask and hit OK.

Layers Merge, Merge Visible.

Add your ©copyright information and License for the tube

Add Name.

Enjoy!

Thursday, January 8, 2015

PTU Sacred Ground Timeline


PTU - Sacred Ground Timeline

Tube of Choice - I am using the STUNNING Artwork of Vinegar.  You can purchase
this and other BEAUTIFUL Artwork at CDO.

Scrapkit used is Inspired By Kurama Phoenix 5-2 by Schnegge's Scraps. (Such a 
BEAUTIFUL kit Angela!  Thank You for letting me use it!)  You can purchase this
and other GORGEOUS scrapkits at CDO.

Font used is a FTU font called Brev Script.

Filters used are Xero-Bad Dream, Greg's Factory Output Volume II-Spotlight and 
one that comes with PSP Mosaic-Antique.

~~~~~~~~~~~~~~~~~~~

Open an 851X315 Transparent New Image.  Open Paper05_IBphoenix5_2_Schnegge.
Image Resize 900X900 and copy and paste as a New Layer.  Activate your bottom
layer, Selections Select All, Activate your paper layer, Image Crop to Selection.

Open your tube of choice and copy and paste as a New Layer.  I moved down from
the center.  Once you have the tube where you like her, Activate your bottom layer, 
Selections Select All, Activate your tube layer, Image Crop to Selection.

Open Element02_IBphoenix5_2_Schnegge, Image Resize to 100X171 and copy
and paste as a New Layer.  I moved to the right a bit and down so the base isn't
showing.  Activate your bottom layer, Selections Select All, Activate your cross 
layer, Image Crop to Selection.

Open Element10_IBphoenix5_2_Schnegge, Image Resize 310X315 and copy 
and paste as a New Layer.  I moved to the upper right hand corner of the tag.
Activate your bottom layer, Selections Select All, Activate your branch layer, Image 
Crop to Selection.

Open Element11_IBphoenix5_2_Schnegge, Image Resize 310X250, and copy 
and paste as a New Layer.  I moved under the branch layer and to the upper right 
hand side of the tag.  Activate your bottom layer, Selections Select All, Activate your 
leaves layer, Image Crop to Selection.

Open Element12_IBphoenix5_2_Schnegge, Image Rotate Clockwise 90 and copy 
and paste as a New Layer.  I moved behind the tube layer so it looks like a tree
behind her.  Layers Duplicate and the bottom layer of this I did Adjust Blur Gaussian
Blur 3.0 and hit OK.  Activate the top layer and then Layers Merge, Merge Down.
Activate your bottom layer, Selections Select All, Activate your doodle/tree layer, 
Image Crop to Selection.

Open Element03_IBphoenix5_2_Schnegge, Image Resize 310X290 and copy
and paste as a New Layer.  I moved toward the bottom right hand side of the tag
and moved so was just above the cross layer.  Activate your bottom layer, Selections 
Select All, Activate your thorns layer, Image Crop to Selection.

Open Element08_IBphoenix5_2_Schnegge and copy and paste as a New Layer.
I moved to the bottom right hand side of the tag and below the cross layer.  Activate 
your bottom layer, Selections Select All, Activate your rose layer, Image Crop to 
Selection.

Open Element04_IBphoenix5_2_Schnegge, Image Resize 310X336 and copy 
and paste as a New Layer.  I moved behind the tube layer and down so it looks like 
the tube has wings.  Activate your bottom layer, Selections Select All, Activate your 
statue layer, Image Crop to Selection.  A little bit of statue might be showing.  Just 
use you eraser tool to erase it.

Open Element09_IBphoenix5_2_Schnegge and copy and paste as a New Layer.
I moved behind the tube layer and down and to the right between the tube and the
cross.  Activate your bottom layer, Selections Select All, Activate your flower layer, 
Image Crop to Selection.

Open Element15_IBphoenix5_2_Schnegge and copy and paste as a New Layer.
I moved behind the tube layer so it kind of acts like a halo around the body.
Activate your bottom layer, Selections Select All, Activate your feather layer, Image 
Crop to Selection.

With your very top layer active, Open Paper06 and copy and paste as a New Layer.
Activate your bottom layer, Selections Select All, Activate your top paper layer, 
Image Crop to Selection.  Selections Select All, Selections Modify, Expand 3 and 
hit the delete key once on your keyboard.  Selections Select All, Selections Float
Selections Defloat Selections Modify Expand 1, Add a New Raster Layer under the
frame layer and Flood Fill with a dark color.  Adjust Blur Gaussian Blur 3.0 and hit
OK on your keyboard.  I then did the Greg's Factory Output Volume II-Spotlight on the top.

Add your ©copyright information and Name.
What I did with the name is, once you have the name down, Selections Select All,
Selections float/defloat, Add a New layer under it and flood fill with a dark color,
Selections Select None.  I then did the Gaussian Blur and then layers duplicate
and on the bottom layer did the Effects, Texture Effects, Mosaic Antique.



Thursday, December 4, 2014

PTU - Moonlit Butterfly


PTU - Moonlit Butterfly Timeline

Tube of Choice - I am using the GORGEOUS artwork of Anna Marine.  You can 
purchase this and other LOVELY artwork at CDO.

Scrapkit used - I am using the BEAUTIFUL scrapkit called Inspired by Anna Marine 
12-3 by Foxys Designz ( Oh Ann!  This is a wonderful kit!  Thank you sooo much
for letting my use it!)  You can purchase this and other STUNNING kits at CDO.

Font used is a FTU font called Undergone.

Optional - Used Filter dsb Flux Bright Noise on Name.

~~~~~~~~~~~~~~~~~~~~

Open a 851X315 Transparent New Image.

Open Paper6_FD, Image Resize 900X900 and copy and paste as a New Layer.
Activate the bottom layer, Selection Select All, Activate the paper layer, Image
Crop to Selection.

Open your tube and copy and paste as a New Layer.  I moved to the right side of 
the tag.  Activate the bottom layer, Selection Select All, Activate the tube layer, 
Image Crop to Selection.

Open Element2_FD, Image Flip, Image Resize 300X213 and copy and paste as a
New Layer.  Move behind the tube layer and up.  Activate the bottom layer, Selection 
Select All, Activate the moon layer, Image Crop to Selection.

Open Element19_FD and copy and paste as a New Layer.  Move above the moon
layer and move so it is surrounding the moon.  Activate the bottom layer, Selection 
Select All, Activate the glimmer layer, Image Crop to Selection.

Open Element13_FD and copy and paste as a New Layer.  Move above the tube
layer and down a bit.  Activate the bottom layer, Selection Select All, Activate the 
butterfly group layer, Image Crop to Selection.  If there is any butterfly's on the tube
use the eraser tool to erase it.

Open Element1_FD, Image Resize 125X123 and copy and paste as a New Layer.
Move above the Butterfly Group and in the middle of the tag.

Open Element14_FD and copy and paste as a New Layer.  Move above the tube
layer and move down so just the top is showing.  Activate the bottom layer, Selection 
Select All, Activate the glitter scatter layer, Image Crop to Selection.

Open Element15_FD and copy and paste as a New Layer.  I moved to right and 
above the moon layer.  Activate the bottom layer, Selection Select All, Activate the 
flower sprig layer, Image Crop to Selection.

Open Element11_FD and copy and paste as a New Layer.  I moved to the left hand
side of the tag.  Activate the bottom layer, Selection Select All, Activate the flower
layer, Image Crop to Selection.

Open Element5_FD, Image Mirror and copy and paste as a New Layer.  I moved
to the left and under the flower layer.  Activate the bottom layer, Selection Select All, 
Activate the leaf layer, Image Crop to Selection.

Open Element16_FD and copy and paste as a New Layer.  I moved below the leaf 
layer and to the left side of the tag.  Activate the bottom layer, Selection Select All, 
Activate the bow layer, Image Crop to Selection.

Add ©copyright and Name.

I added dsb flux Bright Noise on the name.

Enjoy!

Thursday, November 20, 2014

PTU-Haunting


PTU- Haunting

I am using the GORGEOUS artwork of Maxine Gadd.  You can purchase this and 
other BEAUTIFUL artwork at CDO.

The scrapkit I used is Inspired By Steve Baier 9-2 by LadyHawwk Designs (OMG
Cathy!!  This kit is STUNNING!  So many options to go with this kit!  Thank You for
letting me use it!)  You can purchase this and other LOVELY kits at CDO.

Filters used is just one called Xero Bad Dream.

Font used is a FTU font called Aligot de Mirabelle.

~~~~~~~~~~~~~~~~~~~~

Open a 851X315 Transparent New Image.  Open LHD_IB-Baier -9-2-Paper 1, 
Image Resize to 900X900 and copy and paste as a New Layer.  Activate your
bottom layer, Selections Select All, Activate your paper layer, Image Crop to 
Selection.

Open your tube (I chose the close up) and copy and paste as a New Layer.  I moved
down a touch.  Activate your bottom layer, Selections Select All, Activate your tube
layer, Image Crop to Selection.  Now I added Xero Bad Dream with Softness and 
Strength at 128 and everything else at 0 and hit ok.  I changed the Opacity to 56.

Open LHD_IB-Baier -9-2-Ele17 and copy and paste as a New Layer.  I moved this
to the upper right hand side of the tag and below the tube layer.  Activate your
bottom layer, Selections Select All, Activate your moon layer, Image Crop to 
Selection.

Open LHD_IB-Baier -9-2-Ele20 Image Rotate Counterclockwise 90 and copy and 
paste as a New Layer.  I moved to the bottom right hand corner of the tag and above
the moon layer.  Activate your bottom layer, Selections Select All, Activate your 
red/white flowers layer, Image Crop to Selection.  Layers Duplicate Image Mirror 
and Flip.  I moved up a bit more.  Activate your bottom layer, Selections Select All, 
Activate your top red/white flower layer, Image Crop to Selection.

Open LHD_IB-Baier -9-2-Ele22 and copy and paste as a New Layer.  I moved to 
the upper right hand side of the tag and above the moon layer.  Activate your bottom 
layer, Selections Select All, Activate your black smoke layer, Image Crop to Selection.

Open LHD_IB-Baier -9-2-Ele2 and copy and paste as a New Layer.  I moved to
the bottom right hand side of the tag and above the red/white flowers.  Activate your 
bottom layer, Selections Select All, Activate your rose layer, Image Crop to Selection.

Open LHD_IB-Baier -9-2-Ele12 and copy and paste as a New Layer.  I moved to the 
bottom right hand side of the tag and below the rose layer so it is peeking out.
Activate your bottom layer, Selections Select All, Activate your dripping rose layer, 
Image Crop to Selection.

Open LHD_IB-Baier -9-2-Ele15 and copy and paste as a New Layer.  I moved to
the right and behind the dripping rose layer.  Activate your bottom layer, Selections 
Select All, Activate your ribbon layer, Image Crop to Selection.

With your top layer active, Layers New Raster Layer and floodfill with a color of your
choice.  I did a color from the red/white flowers.  Selections Select All, Selections
Modify Contract 3, Hit OK and hit the delete key once on your keyboard. Selections 
Select None. You could do a really big dropshadow or I added a New Layer 
underneath and floodfilled with Black and did all the same as above and when you 
Selections Select None do Adjust Blur Gaussian Blur 3.0 and hit OK.

Add ©copyright information and Name.

Enjoy!

Wednesday, November 12, 2014

PTU-Sugar Skull


PTU - Sugar Skull

Tube of choice - I am using the ADORABLE artwork of Concetta Kilmer.  You can
purchase this and other LOVELY artwork at CDO.

Scrapkit used is the matching Inspired by kit to this tube.  It is called Inspired by
Concetta Kilmer 16-2 by Tasha's Playground (Thank You soooo much Tasha!
I love this kit!) You can purchase this and other BEAUTIFUL kits at CDO.

Font used is a FTU font called HustlersRoughDemo

Filters used are Xero-Bad Dream and Greg's Factory Output Volume II-Pool Shadow

~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open TP_Concetta-16-2_paper5 and copy and paste as a New Layer.  Activate
the bottom layer, Selections Select All, Activate the paper layer, Image Crop to 
Selection.

Open your tube (I chose the head version) and copy and paste as a New Layer.  I
moved to the far right hand side of the tag.  Activate the bottom layer, Selections 
Select All, Activate the tube layer, Image Crop to Selection.  Layers Duplicate.
On the bottom tube layer, Adjust Hue and Saturation, Make both 0 and hit OK.
On the top tube layer, Adjust Blur Gaussian Blur 3.0 and hit OK.  Still on that top
tube layer, Effects, PlugIns, Xero, Bad Dream  (Softness and Strength at 128 
everything else at 0) and hit OK. Change blend mode to Hard Light.  On the bottom
tube layer but a drop shadow.  Merge the 2 tube layers together.

Open TP_Concetta-16-2_e15 and copy and paste as a New Layer.  I moved to the
bottom of the tag and below the tube layer.  Activate the bottom layer, Selections 
Select All, Activate the circles layer, Image Crop to Selection.

Open TP_Concetta-16-2_e13.  Image Resize 205X164 and copy and paste as a 
New Layer.  I moved to the bottom of the tag, under the tube layer and just to the
left of the tube.  Activate the bottom layer, Selections Select All, Activate the roses
layer, Image Crop to Selection.


Open TP_Concetta-16-2_e09.  Image Resize 200X195 and copy and paste as 
a New Layer.  I moved to the bottom right hand side of the tag and below the roses
layer.  Activate the bottom layer, Selections Select All, Activate the skull rose doodle
layer, Image Crop to Selection.

Open TP_Concetta-16-2_e18 and copy and paste as a New Layer.  I moved it 
down so it is just above the paper layer.  Activate the bottom layer, Selections 
Select All, Activate the cactus layer, Image Crop to Selection.

Open TP_Concetta-16-2_e16 and copy and paste as a New Layer.  I moved to the
left hand side of the tag.  Activate the bottom layer, Selections Select All, Activate 
the balloons layer, Image Crop to Selection.

Open TP_Concetta-16-2_e19 and copy and paste as a New Layer.  I moved to the
left and up a bit.  Activate the bottom layer, Selections Select All, Activate the banner
layer, Image Crop to Selection.

With your very top layer active, Layers New Raster Layer and flood fill with a color
of choice.  (I used the color from her hair)  Selections Select All, Selections Modify
Contract 4 and hit the delete key once on your keyboard.  What I then did is Selections
Select All, Selections Float/Defloat, Selections Invert added a New Layer under the
frame and flood filled with black.  Selections Select None.  On the Black layer I did
a Gaussian Blur (3.0) and on the top layer I did the Pool Shadow Filter.

Add your ©copyright information and Name (I did the Pool Shadow filter on this too)

Enjoy!