PTU-Snickerdoodle

PTU-Snickerdoodle

Tube of choice-I am using the artwork of Jehsee.  You can purchase this
and other Beautiful artwork at DSI.

Scrapkit used is called Snickerdoodle by Whisprd Desingz (Thank you so
much Melissa!  GORGEOUS kit!)  You can purchase this and other scrapkits
at Whisprd Designz.

Font used is called Smell The Roses.

~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Copy and paste your tube as a New Layer.  Move down to the bottom of
the tag. I added a drop shadow.

Open wd-snickerdoodle_papers(14) and copy and paste as a New Layer.  Move
below your tube layer and I moved this around till I liked what was
showing.  Activate your bottom layer, Selections Select All, Activate
the paper layer, Image Crop to Selection.

Open we-snickerdoodle_elements(32) Image Resize 50% and copy and paste
as a New Layer.  I moved behind the tube layer and to the bottom left
side of the tag.  Layers Duplicate Image Mirror.  Merge these 2 layers
together.  Activate your bottom layer, Selections Select All, Activate
the circle layer, Image Crop to Selection.

Open wd_snickerdoodle_elements(34) Image Resize 50% and copy and paste
as a New Layer.  I moved to the upper left hand side of the tag.
Activate your bottom layer, Selections Select All, Activate the glow
layer, Image Crop to Selection.

Open we_snickerdoodle_elements (36) and copy and paste as a New Layer.
Move down to just above the glow layer.  Activate your bottom layer,
Selections Select All, Activate the splatter layer, Image Crop to
Selection.

Open wd_snickerdoodle_elements(41) and copy and paste as a New Layer.
I moved it so it is starting on the right hand and down do you could
see the top of the mesh.  Activate your bottom layer, Selections Select
All, Activate the mesh layer, Image Crop to Selection.

Open we_snickerdoodle_elements(51) Image Resize 50% and copy and paste
as a New Layer.  I moved to the upper left hand side of the tag and
moved it above the mesh layer.  Layers Duplicate and then I moved to the
right hand side.  Move to where you like it.  Activate your bottom layer,
Selections Select All, Activate the leaf layer, Image Crop to Selection.

Open wd-snickerdoodle_flowers(18) Image Flip and copy and paste as a New
Layer.  Move below your circle layers and move to where you like it.
Activate your bottom layer, Selections Select All, Activate the flower
layer, Image Crop to Selection.

Layers Merge, Merge Visible.  Add your ©Copyright and Licensing Information
and Name.

PTU-2013

PTU-2013

Tube of Choice-I am using the BEAUTIFUL artwork of Sara Butcher!  You
can purchase this and other artwork at CDO.

Scrapkit used is A New Year by Heather's Devine Dezigns *BEAUTIFUL kit
Heather!  Thank You so much!* You can purchase this and other great
scrap kits at Whisprd Designz.

Font used is Suecos Locos

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image

Open Paper (5) and copy and paste as a New Layer.  I moved it down some.
Activate your bottom layer, Selections Select All, Activate your paper
layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer.  The tube I used comes
in 2 sizes, I used the smaller of the 2.  Activate your bottom layer,
Selections Select All, Activate your tube layer, Image Crop to Selection.

Open element (44) and copy and paste as a New Layer.  I moved this to
the bottom right and above the tube layer.  I erased a few of the circles
that were on top of the tube.  Activate your bottom layer, Selections
Select All, Activate your glow fireworks layer, Image Crop to Selection.

Open element (33) and copy and paste as a New Layer.  I moved to  the
left hand side of the tag.  Activate your bottom layer, Selections Select
All, Activate your Dark Firework layer, Image Crop to Selection.

Open element (65) Image Resize 136X200 and copy and paste as a New Layer.
I moved to the far right hand side of the tag and put a heavy drop shadow
on it.  Activate your bottom layer, Selections Select All, Activate your
stars layer, Image Crop to Selection.

Open element (63) and copy and paste as a New Layer.  I moved this down
to just above the dark firework layer and down on the tag.  Activate your
bottom layer, Selections Select All, Activate your swoosh layer, Image
Crop to Selection.

Open element (2) and copy and paste as a New Layer.  I moved the center
of this to the upper right hand side of the tag and moved it down to just
above the paper layer.  Activate your bottom layer, Selections Select All,
Activate your White Firework layer, Image Crop to Selection.

Now to make the frame.  Here is what I did.  I duplicated the paper layer,
Layers Arrange Move to Top, Selections Select All Selections Modify
Contract 3 and hit the delete key once on your keyboard.  Selections
Select None.  Then I duplicated and on the top one I put a drop shadow
and on the 2nd one I did Adjust Blur Gaussian Blur 3.0.  Then I did
Layers Flip and Mirror.

Layers Merge Merge Visible

Add your ©Copyright Information and Name.

PTU-Christmas Countdown

PTU-Christmas Countdown

Tube and Scrapkit-I am using the GORGEOUS artwork of MyriadelleWith the
equally GORGEOUS Scrapkit by LadyHawwk Designs! *Thank You Myriadelle
and Cathy!* You can purchase this all bundled up at CDO!

Font used is One Starry Night

~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open your tube and copy and paste as a New Layer. Move to where you like
it.  I moved the the right hand side of the tag.  Activate your bottom
layer, Selections Select All, Activate your tube layer, Image Crop to
Selection.

Open LHD_Myriadelle-18-Paper and copy and paste as a New Layer.  I moved
this so the street lamps were behind the tube layer.  Activate your
bottom layer, Selections Select All, Activate your paper layer, Image
Crop to Selection.

Open LHD_Myriadelle-18-Ele41 and copy and paste as a New Layer.  I moved
to the left hand side of the tag and moved it down.  Activate your bottom
layer, Selections Select All, Activate your tree layer, Image Crop to
Selection.

Open LHD_Myriadelle-18-Ele37 and copy and paste as a New Layer.  I moved
under the tree layer and to the left.  Activate your bottom layer,
Selections Select All, Activate your calendar layer, Image Crop to
Selection.

Open LHD_Myriadelle-18 Ele5 and copy and paste as a New Layer.  I moved
so this was above the calendar pages and right above December.  Activate
your bottom layer, Selections Select All, Activate your lamp layer, Image
Crop to Selection.

Open LHD_Myriadelle-18-Ele33 and copy and paste as a New Layer.  I moved
this below the calendar pages and played with it till I liked the
placement.  Activate your bottom layer, Selections Select All, Activate
your petal layer, Image Crop to Selection.

Open LHD_Myriadelle-18-Ele32 and copy and paste as a New Layer.  I moved
to the bottom right corner and moved down below the tube layer.  Activate
your bottom layer, Selections Select All, Activate your wreath layer,
Image Crop to Selection.

Open LHD_Myriadelle-18-Ele24 and copy and paste as a New Layer. I moved
this down and under the petal layer to make it look like a bush.
Activate your bottom layer, Selections Select All, Activate your gold
bauble layer, Image Crop to Selection.

Open LHD_Myriadelle-18-Ele23, Image Resize 162X200 and copy and paste
as a New Layer.  Move below your lamp layer and I moved this up and to
the left a bit.  Activate your bottom layer, Selections Select All,
Activate your ornament layer, Image Crop to Selection.

Layers Merge Merge Visible.

Add your ©Copyright Information and name.

PTU-Meowy Christmas

PTU-Meowy Christmas

Tube of choice-Iam using a very cute kitty by Maryline Cazenave!  You
can purchase this and other great artwork at CDO.

Scrapkit used is Christmas Time by LadyHawwk Designs *Thanks so much
Cathy!* You can purchase this and other great scrapkits at CDO.

Font used is Gingersnaps.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 800X700 Transparent New Image.

Open your tube and copy and paste as a New Layer.  I gave it a drop
shadow.

Open LHD_ChristmasTime-Frame7 and copy and paste as a New Layer.  Move
this behind your tube layer.  With your magic wand click the inside of
your frame.  Selections Modify Expand 10.  Open LHD_ChristmasTime-Paper10
and copy and paste as a New Layer and move below the frame.  Move to
where you like it.  Selections Invert and hit the delete key once on
your keyboard.  Selections Select None.

Open LHD_ChristmasTime-Ele15 and copy and paste as a New Layer.  I moved
to the left hand side of the frame and moved to just above the frame
layer.  I put a drop shadow on this also.

Open LHD_ChristmasTime-Ele23 Image Mirror and copy and paste as a New
Layer.  I moved this behind the tube layer and down so it was in line
with the Christmas Balls that go with the tube.  I added a drop shadow.

Open LHD_ChristmasTime-Ele32, Image Resize 600X273 and copy and paste
as a New Layer.  I moved down to just above the frame layer and moved
it to the right hand side of the frame.  I added a drop shadow.

Open LHD_ChristmasTime-Ele46 and copy and paste as a New Layer.  I moved
this to the left hand side of the tag and down below the paper layer.
Added a drop shadow.

Open LHD_ChristmasTime-Ele51 and copy and paste as a New Layer.  Move
below the clock layer and move to where you like it.  Add a drop shadow.

Open LHD_ChristmasTime-Ele52 and copy and paste as a New Layer.  I moved
this to the right hand side of the tube and moved down below the tube
layer.  Layers Duplicate and move the the left hand side of the tube.

Layers Merge, Merge Visible.  Add your ©Copyright information and name.

FTU-Antique Beauty

FTU-Antique Beauty

Tube of choice-I am using a BEAUTIFUL tube by Maxine Gadd.  You can
purchase this and other great works of art at CDO.

Filters used- Mura's Meister Copies *Wallpaper Perspective*, Effects
Texture Effects Mosaic-Antique, Xero Porcelain.

Font used is Carpenter ICG.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open your tube and copy and paste as a New Layer.

Effect Plug Ins Mura's Meister Copies.  In the box below the picture
Scroll to find Wallpaper Perspective.  These are the settings I used:

With your bottom layer active, Selections Select All, Activate your
wallpaper layer, Image Crop to Selection.

Layers Duplicate and on that top layer Effects Plug Ins Xero Porcelain.
These are the settings I used:

Effects Texture Effects Mosaic-Antique.  These are the settings I used:

Change your blend mode on this layer to Overlay.

Copy and paste your tube again but this time move it under the overlay
layer and add a dropshadow.

With your top layer active, Layers New Raster layer. This will become
your frame layer. I chose to floodfill with #202020.  You might chose
a different color. So floodfill with your color of choice.  Selections
Select All Selections Modify Contract 4 and hit the delete key once on
your keyboard.  Selections Select None.

Layers Merge Merge Visible.

Add your ©Copyright Information and Name.

Here is an example I used with Anna Marine

PTU-Shabby Chic

PTU-Shabby Chic

Tube of choice-I am using the GORGEOUS artwork of Maxine Gadd.  You can
purchase this and other artwork at CDO.

Scrapkit used is Shabby Perfection by Whisprd Designz *Thank You so much
Melissa!*.  You can purchase this and other great scrapkits at Whisprd
Designz.

Font used is Moonstone

~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open your tube and copy and paste as a New Layer.  Move down so the face
is showing.  Activate the bottom layer, Selections Select All, Activate
the tube layer Image Crop to Selection.

Open wd_shabbyperfection_frames (2) and copy and paste as a New Layer.
Activate the bottom layer, Selections Select All, Activate the frame
layer Image Crop to Selection.

With your magic wand, click on the inside of the frame, Selections
Modify Expand 10, Open wd_shabbyperfection_papers (14) and copy and
paste as a New Layer, Selection Invert, hit the delete key once on your
keyboard.  Selections Select None.  Move this below the frame layer and
add a dropshadow to the frame.

With your bottom layer active, open we_shabbyperfection_papers (10) and
copy and paste as a New Layer.  Activate the bottom layer, Selections
Select All, Activate the bottom paper layer Image Crop to Selection.

Open we_shabbyperfection_elements (5) and copy and paste as a New Layer.
I moved down so it was just above the bottom paper.  Activate the bottom
layer, Selections Select All, Activate the chain layer Image Crop to
Selection.  I added a dropshadow.  Layers Duplicate, Image Mirror Flip.

Open wd_shabbyperfection_elements (12) and copy and paste as a New Layer.
I moved to the bottom left corner and added a dropshadow and moved to
just above the bottom paper.  Activate the bottom layer, Selections
Select All, Activate the lacy flower layer Image Crop to Selection. Layers
Duplicate, Image Mirror Image Flip.

Open we_shabbyperfection_elements (17) and copy and paste as a New Layer.
Move down to where the flowers are visible and I moved to the right hand
side of the tag and moved to just above the bottom paper.  Activate the
bottom layer, Selections Select All, Activate the baby's breath layer
Image Crop to Selection. Layers Duplicate, Image Mirror, Image Flip.

Open we_shabbyperfection_elements (26) and copy and paste as a New Layer.
I moved this to the bottom right hand side of the tag and moved down to
just above the frame layer.  Activate the bottom layer, Selections Select
All, Activate the flower layer Image Crop to Selection.

Open we_shabbyperfections_elements (28) and copy and paste as a New Layer.
I moved to the upper left hand side of the tag and moved down to just
above the frame layer. Add a dropshadow.  Activate the bottom layer,
Selections Select All, Activate the brooch layer Image Crop to Selection.

Layers Merge Merge Visible.

Add your ©copyright information and name.

PTU-Winterglow

PTU-Winterglow

Tube of Choice-I am using the GOERGEOUS artwork of Pinuptoons! You can
purchase this and other artwork at CDO.

Scrapkit used is Hungry Hill's Winterglow *OMG Alison!  This kit is
Wonderful!  Thank You so much for letting me use it!* You can purchase
this and other BEAUTIFUL kits by Hungry Hill at CDO.

Font used is Porcelain.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image.

Open circle and copy and paste as a New Layer.

Open lace-doily and copy and paste as a New Layer.  Center behind the
circle layerand move below it.  Activate your circle layer and with your
magic wand click on the inside of it.  Selection Modify Expand 10,
Selection Invert and activate the doily layer and hit the delete key
once on your keyboard. Do Not DeSelect!!!!!

Open ornament-3 Image Resize 500X895 and copy and paste as a New Layer.
This should be above your doily layer.  Selections Invert and hit the
delete key once on your keyboard (This should take everything outside
the frame away,  You might need to do crop to selection if the hook and
that didn't go away.)  Selections Select None.

Open your tube of choice and copy and paste as a New Layer.

With your ornament layer active, Selections Select All, Selections Float
Defloat, Open snow and copy and paste as a New Layer, Selections Invert
and Don't Deselect yet!!!

Open tree-1, Image Resize 472X600 and copy and paste as a New Layer.
I moved to the left hand side of the tag but it is under the circle
and snow layers.  Hit the delete key once on your keyboard.  Do not
Deselect Yet!

Open bench Image Resize 387X367 and copy and paste as a New Layer. I moved
this down so it kind of gives the impression the tube is sitting on it.
Hit the delete key once on your keyboard.  Selections Select None.

Open tree-1, Image Resize 472X600 and copy and paste as a New Layer. I
moved this behind the tube layer and to the left so you can still see the
other tree,

Open lantern Image Resize 275X275 and copy and paste as a New Layer.
I moved this down below the circle layer and up on the tag.

Once happy with your placement add dropshadows to what you would like to
have a dropshadow.

Layers Merge, Merge Visible.

Add your ©Copyright and Licensing information.  Add your name.

PTU-Whimsy Forever

PTU-Whimsy Forever

I am using the BEAUTIFUL artwork of Amy Brown.  You can purchase this
and other artwork at CDO.

Scrapkit used is called Forever by Whisprd Designz *Thanks so much
Melissa!  The kit is GORGEOUS with so many options to choose from to
make a tag!!!* You can purchase this and other great kits at Whisprd Designz Store.

Font used Yore Script. (Used Adjust Add Noise 100% twice)

~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open wd-forever_elements(43) and copy and paste as a New Layer.  I moved
to the right.  Activate your bottom layer, Selections Select All,
activate the cloud layer, Image Crop to Selection.

Open wd_forever_elements (42) and copy and paste as a New Layer.  I
moved to the left and under the cloud layer.Activate your bottom layer,
Selections Select All, activate the blue layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer.  I moved to the left
hand side of the tag.  Activate your bottom layer, Selections Select All,
activate the tube layer, Image Crop to Selection.

Open wd_forever_elements (36) and copy and paste as a New Layer.  I moved
this below the cloud layer and to the left.  Activate your bottom layer,
Selections Select All, activate the doodle layer, Image Crop to Selection.

Open wd_forever_elements (63) and copy and paste as a New Layer.  I
moved this up and to the right and behind the tube layer to make it look
like it was hanging behind her.  I added a dropshadow.

Open wd_forever_elements (64) and copy and paste as a New Layer.  I
moved this to the far left hand side of the tag and moved down to just
above the blue layer.  Activate your bottom layer, Selections Select All,
activate the Star layer, Image Crop to Selection.  Layers Duplicate and
move to above the tube layer.  On the original layer add a dropshadow
and on the duplicated layer you can make it look like it is weaved
through by erasing some.

With your blue layer active, Open wd_forever_elements (110) and copy and
paste as a New Layer.  Add a dropshadow.  Activate your bottom layer,
Selections Select All, activate the fence layer, Image Crop to Selection.

Open wd_forever_elements (13) and copy and paste as a New Layer.  I moved
to the far right hand side of the tag. Add a dropshadow.  Activate your
bottom layer, Selections Select All, activate the wrap layer, Image Crop
to Selection.

Open wd_forever_elements (15) and copy and paste as a New Layer.  Add a
dropshadow. Move down below the tube layer.  Activate your bottom layer,
Selections Select All, activate the glitter frame layer, Image Crop to
Selection.

Open wd_forever_elements (37) and copy and paste as a New Layer.  I moved
to the bottom right hand corner of the tag and down to just above the
cloud layer.  Activate your bottom layer, Selections Select All, activate
the blurred flower layer, Image Crop to Selection.

Layers Merge, Merge Visible.

Add your ©copyright and License information and name.

PTU-The Warmth of Autumn

PTU- The Warmth of Autumn

Tube of choice- I am using the GORGEOUS artwork of Jennifer Janesko.
You can purchase this tube and others at CDO.

Scrapkit used is The Warmth of Autumn by Foxys Designz *Thank You sooo
much Ann!!!!  Love this kit!*  You can purchase this and other great
kits at CDO.

Font used is Bluelmin Ralph.

~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open Paper8_FD and copy and paste as a new layer.  Activate your bottom
layer, Selections Select All, Activate your paper layer, Image Crop to
Selection.

Open your tube and copy and paste as a new layer.  I moved to the left
but you may chose to put it elsewhere on the tag.  Activate your bottom
layer, Selections Select All, Activate your tube layer, Image Crop to
Selection.

Open Frame4_FD and copy and paste as a new layer.  Move around to where
you like it.  I tried a lot of stuff and went with where I placed it.
Try Image Mirror or Image Flip.  Activate your bottom layer, Selections
Select All, Activate your frame layer, Image Crop to Selection. Move
below your tube layer.

Open Element20_FD and copy and paste as a new layer.  I moved this behind
the tube layer and just under her ear on the left.  Activate your bottom
layer, Selections Select All, Activate your light layer, Image Crop to
Selection.  Layers Duplicate and I moved to her right side and a little
bit lower.  Activate your bottom layer, Selections Select All, Activate
your second light layer, Image Crop to Selection.

Open Element26_FD and copy and paste as a new layer.  I moved this up
and to the right and moved just above the frame layer.  Activate your bottom
layer, Selections Select All, Activate your leaf layer, Image Crop to
Selection.

Open Element38-FD and copy and paste as a new layer.  I moved this so
it is above the paper layer.  Activate your bottom layer, Selections
Select All, Activate your glitter layer, Image Crop to Selection.

ok, Making sure your top layer is active, Open Paper2_FD and copy and
paste as a new layer.  Activate your bottom layer, Selections Select All,
Activate your top paper layer, Image Crop to Selection.  Selections
Select All, Selections Modify Contract 3 and hit the OK Button, Now hit
the Delete Key once on your keyboard.  Selections Select None.

Layers Merge Merge Visible.  Add your ©copyright and license information,
Add your name and you are done!

PTU-Ante Up

PTU-Ante Up

Tube and Scrapkit are Maryline Cazenave Package 23 with Matching Scrap
Kit by LadyHawwk Designs.  You can purchase these at CDO.

Fonts used are Romantiques and Janda Celebration Script

~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image.

Open your tubes and copy and paste as New Layers.  On the basset hound
I did Image Mirror.  Arrange them to your liking. I moved them down on
the tag.

Open LHD_Cazenave-23-Ele4 and copy and paste as a New Layer.  I moved
this up and below the tubes.

Open LHD_Cazenave-23-Ele25 and copy and paste as a New Layer.  I moved
this below the spade chip and to the left.  Layers Duplicate Image
Mirror Flip.

Open LHD_Cazenave-23-Ele32 and copy and paste as a New Layer.  I moved
down on the tag and moved to just above the spade chip.  Layers Duplicate
Image Flip Image Mirror.

Open LHD_Cazenave-23-Ele34 and copy and paste as a New Layer.  I moved
this to the left and below the spade chip.  Layers Duplicate Image
Mirror Image Flip.

Open LHD_Cazenave-23-Ele39 and copy and paste as a New Layer.  I moved
this up and to the left of the spade chip and moved below the spade
chip.  Layers Duplicate.  I moved this over to the right hand side of
the spade chip.

Open LHD_Cazenave-23-Ele38 and copy and paste as a New Layer.  I moved
to the left.  Layers Duplicate Image Mirror. Layers Merge Merge Down
Layers Arrange Move to bottom.

Open LHD_Cazenave-23-Ele58 Image Resize 650X212 and copy and paste as a
New Layer.  I moved this down to the bottom of the tag.

I use the font Romantiques at size 48 using the colors #eee4d4 for the
foreground and #c47638 got the background to write Ante Up.

Layers Merge Merge Visible.

Add Your ©Copyright and Licensing Information and Name.

PTU-Making Ice Angels

PTU-Making Ice Angels

Tube of Choice-I am using the GORGEOUS artwork of Myriadelle.  You can
purchase this and other artwork at CDO.

Scrapkit used is Ice Angels by Hungry Hill *Thanks so much Alison!!
BEAUTIFUL kit!*. You can purchase this and other kits at CDO.

Font used is Janda Celebration Script.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image.

Open your tube, (This tube has many amazing options!!!  I went with
Blue.) and copy and paste as a New Layer.

Open frost-frame and copy and paste as a New Layer.  Move this below
your tube layer.  I played around a bit but moved the frame to the
right a bit and the tube a bit to the left.  Duplicate your tube layer
and move below your frame layer.  With your top tube layer active,
carefully erase what is showing above the frame (leg and torso). Activate
your bottom layer and add a drop shadow.

With your Freehand tool, draw in the middle of your frame all the way
around. Open paper-6 and copy and paste as a New Layer.  Move below the
bottom tube layer. Selections Invert and hit the delete key once on your
keyboard.  Don't De-Select yet.

Open frost-swirl and copy and paste as a New Layer.  Hit the delete key
once on your keyboard.  Selections Select None.

Open deco* Image Resize 300X276 and copy and paste as a New Layer. If
your haven't already Move up so it is on the top layer. I moved it so
that the tube looks like it is on it.  So with the eraser tool carefully
erase what is above the tube.

Open glitter, activate your bottom layer and copy and paste as a New Layer.

Open lanterns and copy and paste as a New Layer.  Move this down till it
is just above the frame layer.

Open snowy-branch-2. Image Resize 300X196 and copy and paste as a New
Layer.  I moved this down and below the deco layer.  With your Erase
tool, carefully erase the part that is on the sleeve.

Activate your paper layer.  Open snowy-tree-2 and copy and paste as a
New Layer.  I moved to the right a bit.  With your paper layer active,
Selections Select All Selections Float Defloat Selections Invert, Activate
your tree layer and hit the delete key once on your keyboard.  Selections
Select None.

Activate your frame layer.  Add a heavy dropshadow to it.

Layers Merge Merge Visible.

I like my tags 600X600 so I resized.

Add your ©copyright information and Name.

PTU-So Emo-tional

PTU-So Emo-tional

Tube of Choice-I am using the artwork of Anna Marine.  You can purchase
this and other great artwork at CDO.

Scrapkit used is called Emotions by Nette's Nightowl Works *Thanks so
much Nette!!!*.  You can purchase this and other GREAT scrapkits at
Scrappin Naturally.

Font used is Foglihten No 04

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image

Open nnw emo paper3 and copy and paste as a New Layer.  Activate the
bottom layer, Selections Select All, Activate the paper layer, Image
Crop to Selection.

Open your tube, I moved to the right hand side of the tag. Activate the
bottom layer, Selections Select All, Activate the tube layer, Image
Crop to Selection. Layers Duplicate.  On the top layer, Adjust Blur
Gaussian Blur 3.0.  The bottom layer add a drop shadow.  Activate the
top tube layer again and change the Blend Mode to Soft Light.  Layers
Merge Merge Down.

Open nnw emo border1 and copy and paste as a New Layer.  I moved to the
top of the tag.  Activate the bottom layer, Selections Select All,
Activate the border layer, Image Crop to Selection.  Layers Duplicate.
Activate the bottom border layer, Adjust Blur Gaussian Blur 3.0. Layers
Merge Merge Down.  Layers Duplicate Image Flip.

Open nnw emo whisp and copy and paste as a New Layer. Activate the
bottom layer, Selections Select All, Activate the whisp layer, Image
Crop to Selection.

Open nnw emo chain heart and copy and paste as a New Layer.  I moved
this down on the tag so it was a little above the bottom border layer.
Activate the bottom layer, Selections Select All, Activate the chain
layer, Image Crop to Selection. Layers Duplicate.  I moved one below
the bottom border layer and one above the border layer.  With the
chain layer above the border active, Activate your Eraser tool and
erase some of the chain so it looks like it is hooked in with the
border.

Layers Merge Merge Visible.

Add your ©copyright information and name.

PTU-Dark vs Light

PTU-Dark vs Light

Tube of choice-I am using the artwork of Dirk Richter.  You can purchase
this BEAUTIFUL tube and other at CDO.

Scrap kit used is Dark Vs Light by CBJ *Thanks Jo I sooo Love this kit!*.
You can purchase this and other great kits at Whisprd Designz.

Font used is CF Anabelle

~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open CBJ_Dark vs Light Paper10 and copy and paste as a New Layer.  I moved
it down some to get the dark and light on the tag.  Activate the bottom
layer, Selections Select All, Activate the paper layer, Image Crop to
Selection.

Open your tube of choice (I used the close up) and copy and paste as a
New Layer.  I moved mine to the left.  Activate the bottom layer,
Selections Select All, Activate the tube layer, Image Crop to Selection.

Open CBJ_Dark vs Light DoodleEge and copy and paste as a New Layer. I
moved this to the top of the tag behind the tube layer.  Activate the bottom
layer, Selections Select All, Activate the DoodleEge layer, Image Crop to
Selection.


Open CBJ_Dark vs Light DoodleEge2 Image Mirror and copy and paste as a
New Layer.  I moved this to the bottom of the tag behind the tube layer.
Activate the bottom layer, Selections Select All, Activate the Doodle layer,
Image Crop to Selection.

Open CBJ_Dark vs Light Flowers and copy and paste as a New Layer.  Move
below your tube layer and move to where you like it.  Activate the bottom
layer, Selections Select All, Activate the flower layer, Image Crop to
Selection.

Open CBJ_Dark vs Light WhtGlitter and copy and paste as a New Layer.
Activate the bottom layer, Selections Select All, Activate the White Glitter
layer, Image Crop to Selection.

Open CBJ_Dark vs LightBlkGlitter, Image Mirror and copy and paste as a
New Layer.  Activate the bottom layer, Selections Select All, Activate
the Black Glitter layer, Image Crop to Selection.

Open CBJ_Dark vs LightIvyFrame and copy and paste as a New Layer.  I
moved this to the left behind the tube layer between the flower and glitter
layers.  Activate the bottom layer, Selections Select All, Activate the
Ivy Frame layer, Image Crop to Selection.

Open CBJ_Dark vs Light ButFly2, Image Resize 25% and copy and paste as
a New Layer.  I move this on top of the tube and up toward the top.
Activate the bottom layer, Selections Select All, Activate the butterfly
layer, Image Crop to Selection.

Open CBJ_Dark vs Light Word Circle, Image Resize 600X583 and copy and
paste as a New Layer.  I moved this down to where the word from the top
part of the circle was on the tube.  Activate the bottom layer, Selections
Select All, Activate the word circle layer, Image Crop to Selection. I
had to erase some words that were showing.  Layers Duplicate Adjust Blur
Gaussian Blur 3.0

Layers Merge Merge Visible

Add your ©Copyright Information and Name.

PTU-Feeling Devilish

PTU-Feeling Devilish

Tube of Choice-I am using the artwork of Jessica Dougherty.  You can
purchase this and other great artwork at CDO.

Scrapkit used is Inspired by Jessica Dougherty 32-3 by LadyHawwk
Disigns (Beautiful Kit Cathy!  Thanks so much!).  You can purchase this
and other great kits at CDO.

Font used is Lakeshore Drive

~~~~~~~~~~~~~~~~~~~~~~~~

Open a New Transparent Image 700X700

Open your tube and copy and paste as a New Layer.

Open LHD_IB_Dougherty-32-3-Frame1 and copy and paste as a New Layer.
Image Rotate Rotate Clockwise 90 and hit OK.  Copy and paste as a New
Layer and move down on the tag so the bottom of the tube is at the
bottom of the opening on the frame.  You might need to move your tube
around also.  Duplicate your tube and move this below the frame layer.
With your top tube layer active, Activate your eraser tool and erase
and that is hanging over your frame.  I added a drop shadow to the bottom
tube layer.

With your frame layer active, with your magic wand click on the inside
of your frame, Selections Modify Expand 10, Open LHD_IB-Dougherty-32-3-
Paper4 and copy and paste as a New Layer.  Move this below your bottom
tube layer, Selections Invert and hit the delete key once on your keyboard.
Selections Select None.

Open LHD_IB-Dougherty-32-3-ele0 and copy and paste as a New Layer. I
moved this to the left a bit and below the bottom tube layer.

With your magic wand, click on the inside of your window in all the panes.
Selection Modify Espand 10.  Open LHD_IB-Dougherty-32-3-Paper4 and copy
and paste as a New Layer.  Move this below the window layer.  Selections
Invert and hit the delete key once on your keyboard.  Selections Select
None.

Open LHD_IB-Dougherty-32-3-ele13 and copy and paste as a New Layer.
Move this down so it is above the window paper, Layers Duplicate and
move this so it is above the paper layer in the frame.  Activate the
paper layer in the window Selections Select All Selections Float/Defloat
activate that tree layer Selections Invert And hit the Delete key once
on your keyboard.  Selections Select None.  Repeat for the other tree
layer.

Open LHD_IB-Dougherty-32-3-ele6 and copy and paste as a New Layer.
I moved this down ans to the right and above the paper in the frame.
Once happy with your placement, Activate that paper layer in the frame,
Selections Select All Selections Float/Defloat Selections Invert. Activate
the lamp layer and hit the delete key once on your keyboard. Selections
Select None.

Open LHD_IB-Dougherty-32-3-ele9 and copy and paste as a New Layer.
I moved this to the right and moved this below the top tube layer.

Open LHD_IB-Dougherty-32-3-ele10 and copy and paste as a New Layer.
I moved this to the left of the window and Moved to the bottom.

Open LHD_IB-Dougherty-32-3-ele17 and copy and paste as a New Layer.
I moved this to the right of the window and moved to the bottom.

Open LHD_IB-Dougherty-32-3-ele3 and copy and paste as a New Layer.
I moved this to the right so it was on top of the black flower.
I erased the little bit that was showing on the left of the window.

Layers Merge Merge Visible.

I like my tags 600X600 so I resized.

Add ©Copyright information and name and you are done.

PTU-Spooky Cute

PTU-Spooky Cute

Tube and Scrapkit used is Marika Package 10 and Matching Scrap Kit by
LadyHawwk Designs *Thank You so much Cathy!*.  You can purchase this
and other great tubes and kits at CDO.

Mask used is MB and SW Forum Mask 24 by Moonbeams and Spiderwebs.

Font used is Lyrics Movement.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open LHD_Marika-10-Papers3 and copy and paste as a New Layer.  Activate
the bottom layer, Selections Select All, Activate the paper layer, Image
Crop to Selection.

Open LHD_Marika-10-Papers17 and copy and paste as a New Layer. Activate
the bottom layer, Selections Select All, Activate the top paper layer,
Image Crop to Selection.

Open your mask, With the top paper layer active, Layers New Mask Layer
From Image, Scroll down to find your mask and hit OK. Layers Merge Merge
Group.

Open your tube (I used a close up) and copy and paste as a New Layer.
I moved the tube to the far right hand side of the tag. Activate the
bottom layer, Selections Select All, Activate the tube layer, Image
Crop to Selection.

Open LHD_Marika-10-Ele21 and copy and paste as a New Layer. Activate
the bottom layer, Selections Select All, Activate the Green Orb layer,
Image Crop to Selection.

Open LHD_Marika-10-Ele20 and copy and Paste as a New Layer. I moved this
toward the bottom left hand corner. Activate the bottom layer, Selections
Select All, Activate the Blue Orb layer, Image Crop to Selection.

With your tube layer active, Open LHD_Marika-10-Ele7 and copy and paste
as a New Layer. I moved this down to the bottom of the tag to where the
top was all that is showing.  Activate the bottom layer, Selections
Select All, Activate the border layer, Image Crop to Selection. Now do
Selections Select All Selections Float/Defloat Selections Modify Expand
2. Activate the layer under this and Layers New Raster Layer and flood
fill with white.  Selections Select None.

 Now on that White Layer, Adjust Add/Remove Noise Add Noise Gaussian 100% Monochrome Checked and hit OK.Repeat this one more time. Now on both layers (Border and Glitter layer)

I duplicated both Image Flip and moved them below the tube layer.

Open LHD_Marika-10-Ele11 and copy and paste as a New Layer.  I moved down
a bit and moved above the green orb layer.  Activate the bottom layer,
Selections Select All, Activate the Spider layer, Image Crop to Selection.

Open LHD_Marika-10-Ele18 and copy and paste as a New Layer.  I moved this
the mask layer. Activate the bottom layer, Selections Select All, Activate
the Jewel layer, Image Crop to Selection.

Open LHD_Marika-10-Ele25 and copy and paste as a New Layer. I moved this
up and the the right about half way.  Move below the Jewel layer. Activate
the bottom layer, Selections Select All, Activate the Flower layer,
Image Crop to Selection.

Open LHD_Marika-10-Ele34 and copy and paste as a New Layer.  I moved this
between the tube and orb and down to where only the flower is showing.
Move this down under the Flower Layer. Activate the bottom layer, Selections
Select All, Activate the Black Flower layer, Image Crop to Selection.

Open LHD_Marika-10-Ele31 and copy and paste as a New Layer.  I moved this
to the Left and just above the top border layer.  Layers Duplicate Image
Mirror/Flip and moved this above the bottom Border layer.  Layers Merge
Down Activate the bottom layer, Selections Select All, Activate the Glow
layer, Image Crop to Selection.

Layers Merge Merge Visible.

Add your ©copyright information and Name.

With Lyrics Movement it is a very light font so you will have to duplicate
many times.

PTU-All of my love

PTU-All of my love

Tube of Choice- I am using the artwork of Helena Reis.  You can purchase
this and other Great artwork at DSI.

Scrapkit is called All of my love by Chaos Priestess.  You can purchase
this Beautiful kit at others at Whisprd Designz.

Font used is Anywhere but home.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open AOML_Paper_16 and copy and paste as a New Layer.  I moved it up a
bit to get the "floor" in on the tag.  Activate your bottom layer, Selections
Select All, Activate your paper layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer.  I moved to the right
and down a touch. Activate your bottom layer, Selections Select All,
Activate your paper layer, Image Crop to Selection.  There was a tiny bit
of her hand showing in a weird spot and I used my eraser tool to erase it.

Open AOML_Clock2 and copy and paste as a New Layer.  I moved this to the
upper left hand side of the tag.  Activate your bottom layer, Selections
Select All, Activate your clock layer, Image Crop to Selection.

Open AOML_Doodle_05 and copy and paste as a New Layer.  I moved this
below the tube layer and to the right.  Activate your bottom layer,
Selections Select All, Activate your doodle layer, Image Crop to Selection.

Open AOML_Flower_02 and copy and paste as a New Layer. I moved this up and
to the left so it was on top of the clock a little bit.  Activate your
bottom layer, Selections Select All, Activate your flower layer, Image
Crop to Selection.

Open AOML_Foliage_01 and copy and paste as a New Layer. I move this below
the doodle layer but adjust so that it was above the flower layer. Activate
your bottom layer, Selections Select All, Activate your leaves layer,
Image Crop to Selection.

Open AOML_GlitterSplat_03 Image Flip and copy and paste as a New Layer.
I moved this up and under the clock layer. Activate your bottom layer,
Selections Select All, Activate your glittersplat layer, Image Crop to
Selection.

Open AOML_MeshHeart_El01 and copy and paste as a New Layer.  I moved this
below the clock layer and to the left.  Activate your bottom layer, Selections
Select All, Activate your mesh layer, Image Crop to Selection.

Open AOML_ButterflyEl_01 I moved this above the clock layer and to the
left.  Activate your bottom layer, Selections Select All, Activate your
butterfly layer, Image Crop to Selection.

Layers Merge Merge Visible.

Add your ©Copyright information and name and you are done!







 

PTU-Autumn Breeze

I am excited to announce I am now on the CT of Whisprd Designz!  Beautiful Scrapkit by BEAUTIFUL People!  You should definately go check out the store!

~*~*~*~*~*~*~*~*~*~*~*~*~

PTU-Autumn Breeze

I am using the artwork of Anna Marine. You can purchase this and other
Beautiful artwork at CDO.

I using a scrapkit by WDDesignz called Autumn Breeze (Thank You so
much Melissa!!!).  You cam purchase this and other Great kits at
Whisprd Designz.

Font used is Many Weatz

Optional-I did use a fairy dust brush.  You can find these at deviantart
or do a google search.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open pp06 and copy and paste as a New Layer.  Activate the bottom layer,
Selections Select All, Activate your paper layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer and move to where you
like it.  Activate the bottom layer,Selections Select All, Activate your
tube layer, Image Crop to Selection.

Open berries01 Image Mirror and copy and paste as a New Layer.  Move
behind the tube layer and down.  Once happy with your placement, Activate
the bottom layer,Selections Select All, Activate your berry layer, Image
Crop to Selection.

Open fence03 Image Resize 650X392 and copy and paste as a New Layer.  I
moved it down below the tube and down on the tag.  Activate the bottom layer,
Selections Select All, Activate your fence layer, Image Crop to Selection.

Open Leaves01 Image Resize 650X412 and copy and paste as a New Layer. I
moved this to the top of the tag and below the berry layer.  Activate
the bottom layer,Selections Select All, Activate your leaves layer,
Image Crop to Selection.

Open flower13 and copy and paste as a New Layer.  I moved to the bottom
right hand corner of the tag and moved it so it was right above the
paper layer.  Activate the bottom layer,Selections Select All, Activate
your white flower layer, Image Crop to Selection.  Repeat with flower16
but put it in the bottom left corner.

This part is optional.  With your bottom paper layer active, Layers New
Raster layer and using white I used a fairy dust brush to put some stars
in the back ground.

Activate your bottom paper layer, Layers Duplicate.  Move the duplicate
to the top.  Selections Select All Selections Modify Contract 8 and hit
the delete key once on your keyboard.  Selections Select None.

Layers Merge Merge Visible.

Add your ©Copyright information and name.

PTU-Goddess of Autumn

Goddess of Autumn

I am using the GORGEOUS artwork of Maxine Gadd.  You can purchase this
and other equally GORGEOUS artwork at CDO.

I am using the BEAUTIFUL scrapkit called Subtle Autumn by Hungry Hill
(*Thanks so much Alison*) You can purchase this and other GREAT kits
by Hungry Hill at CDO.

Font used is Moonstone

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image.

Open frame-4 and copy and paste as a New Layer.

Open your tube and copy and paste as a New Layer. Move up so it mostly
fits in the frame.  Layers Duplicate. Move this below the frame layer.
I added a slight drop shadow. With the top tube layer active, activate
your eraser tool and erase the little bit on the sides that is going
over the frame.

With your frame active, Activate your magic wand and click on the inside
of your frame.  Selections Modify Expand 20.

Open paper-10 and copy and paste as a New Layer.  Selections Invert and
hit the delete key once on your keyboard.  Selections Select None.  Move
the paper below your bottom tube layer.

Open fairy-lights. Image Resize 455X408 and copy and paste as a New Layer.
I moved this just above the paper layer and down.  Activate the paper
layer Selections Select All Selections Float/DeFloat Selections Invert
Activate the fairy light layer and hit the delete key once on your keyboard.
Selections Select None.

Open bricks, Image Resize 455X424 and copy and paste as a New Layer.
I moved this above the paper layer and put a slight drop shadow on it.

Open sparkle and copy and paste as a New Layer.  I moved this down above
the brick layer.

Open grass, Image Resize 600X450 and copy and paste as a New Layer. I
Moved this to the top of the frame and below the frame layer.  Layers
Duplicate Image Flip.

Open leaf-fall and copy and paste as a New Layer.  I moved this to the
left and below the grass layer.  Layers Duplicate Image Mirror.  Merge
these together (Layers Merge Merge Down) then Duplicate again Image Mirror
Image Flip.

Open hummingbird Image Resize 150X118 and copy and paste as a New Layer.
I moved this to the upper left hand side of the frame.  Layers Duplicate
and on the top copy Adjust Blur Gaussian Blur 3.00 and change the blend
mode to overlay.

Open moth-2, Image Resize 150X108 and copy and paste as a New Layer. I
rotated the moth Image Rotate Free Rotate Left 23.00

Layers Merge Merge Visible.

Add Your ©copyright information and name.

With the name, I used the color from the tube (forehead area) for the
base and then I Selections Select All, Selections Float Defloat and them
copy and paste the closeup tube and moved down.  Selections Invert and
hit the delete key once on my keyboard.  Might need to activate the bottom
layer Selections Select All and then click on the tube part of the name
Image Crop to Selection.

FTU-Magic Spell

FTU-Magic Spell

Tube of Choice-I am using the artwork of Caron Vinson (This cute wizard
reminded me of Dumbledore LOL)  You can purchase this and other great
artwork at CDO.

Fonts used Grachi 2 and Garineldo SC

We will be using the Rounded Rectangle with your Selection Tool and Circle
and Star Preset Shapes.

Filter used is Mura's Meister Copies Tiling.

I also used some brushes.  Trees, moon and birds.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image.

Open your tube and copy and paste as a New Layer.


Layers New Raster Layer. Open your Selection Tool and under Selection
type scroll down to Rounded Rectange, Mode Add(Shift) Feather 0 Anti-alias
checked and make a rounded rectangle going across.

  Size choice is yours.
Don't De-Select. I then flood filled with a color from my tube. Selections
Modify Contract 8 Layers New Raster Layer and I flood filled with a lighter
color from my tube.  Selections Select None.  I moved the smaller rectangle up and to the right
to make it slightly off center.

Layers New Raster Layer and repeat with the Rounded Rectangle but make it
go up and down this time.  I used the color of the eyes this time you may
choose to use a different color and I say Go For It!  Repeat with the smaller
Rectangle. and make it off Center.

With your original rectangle active, using your star preset tool (symmetric
shape) and your colors chosen (I did a gradient of yellow and white)
make a small star. Objects Align Center in Canvas Layers Convert to Raster
Layer.  Effects Plug Ins Mura's Meister Copies Tiling and hit OK (I didn't
change the numbers) and you should have a bunch of stars showing.  Activate
that first rectangle Selections Select All Selections Float/DeFloat Selections
Invert Activate the Star Layer and hit the Delete Key once on your keyboard.
Selections Select None.

You could either repeat with the stars for the other set of standing Rectangles
or use a preset shape of your choice.

With your background/Raster 1 active, using your Eclipse Preset tool
Mine automatically makes everything black.  If yours doesn't change your
background to black, Foreground Null and make a circle. Obejects Align
Center in Canvas.  Selection Select All Selections Float/ DeFloat Layers
New Raster Layer, I chose a really light lavender color but use what looks
best with your tube and other color choices and flood fill. Here is where
I would do your Text on a curve.  Layers New Raster Layer and if you move
your mouse by the edge of the circle you will see the letter A with a curve
under it, click and your font box will show up.  Write what you will in
that box and hit ok. Click on the Black Circle, Layers Convert to Raster
Layer Adjust Blur Gaussian Blur 3.00.

Now here is where I added my brushes.  Remember to add a New layer then
apply the brush.  I added Trees to my front Circle and Moon and Birds to
the standing Rectangle.

Layers Merge Merge Visible. I resized to 600X600.

Add your name and ©copyright information.

PTU-Sweet Melody

PTU-Sweet Melody

Tube of Choice-I am using the GORGEOUS artwork of Camilla Drakenborg.
You can purchase this and other artwork at UYA.

Scrapkit used-I am using the BEAUTIFUL work of Zlata Designs!  The kit
is called Sweet Melody and can be found at Scrappin' Naturally.

Font used is a FTU font called Many Weatz. (Sweet Melody is in cafe &
brewery)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open your tube and copy and paste as a New Layer.  I moved mine to the
far left.  Once you are happy where it is, Activate the bottom layer,
Selections Select All, Activate your tube layer, Image Crop to Selection.
I then Duplicated and on the bottom layer Adjust Hue and Saturation and
change both numbers to 0 (zero) on the top copy Adjust Blur Gaussian
Blur 3.00 and change the blend mode to Overlay.

Open ZlataDesigns_SweetMelody (24) Image Resize 650X651 and copy and
paste as a New Layer.  I moved this to the left a bit and moved below
the tube layer.  Activate the bottom layer, Selections Select All,
Activate your frame layer, Image Crop to Selection.

Open ppZlataDesigns_SweetMelody (3) Image Resize 650X650 and copy and
paste as a New Layer.  Move below the frame layer and move to the left
so it is all behind the frame.  Activate the bottom layer, Selections
Select All, Activate your paper layer, Image Crop to Selection.

Open ppZlataDesigns_SweetMelody (2) Image Resize 650X650 and copy and
paste as a New Layer.  Move below the frame layer and move to the right
and up to get some of the darker green showing.  Activate the bottom
layer, Selections Select All, Activate your top paper layer, Image Crop
to Selection.

Open ZlataDesigns_SweetMelody (1) Image Resize 325X222 and copy and paste
as a New Layer.  I moved this to the right and under the frame layer so
only the bottom right wing was showing.  Activate the bottom layer,
Selections Select All, Activate your butterfly layer, Image Crop to
Selection.

Open ZlataDesigns_SweetMelody (2) Image Resize 600X153 Image Mirror and
copy and paste as a New Layer.  I moved this down to the bottom of the
tag and below the tube layer.  Activate the bottom layer, Selections S
elect All, Activate your tendril layer, Image Crop to Selection.

Open ZlataDesigns_SweetMelody (3) Image Resize 600X314 and copy and paste
as a New Layer.  Move this just above the Frame layer and up a bit.
Activate the bottom layer, Selections Select All, Activate your petal
layer, Image Crop to Selection.

Open ZlataDesigns_SweetMelody (5) Image Resize 115X113 and copy and paste
as a New Layer.  I moved to the bottom right of the tag and below the
tendril layer.  Activate the bottom layer, Selections Select All,
Activate your flower layer, Image Crop to Selection.

Open ZlataDesigns_SweetMelody (13) Image Resize 600X254 and copy and paste
as a New Layer.  I moved this to the left and just above the frame layer.
Activate the bottom layer, Selections Select All, Activate your flower cluster
layer, Image Crop to Selection.

Open ZlataDesigns_SweetMelody (18) Image Resize 282X350 and copy and paste
as a New Layer. Move this below the butterfly layer. Activate the bottom
layer, Selections Select All, Activate your feather layer, Image Crop to
Selection.

Open ZlataDesigns_SweetMelody (20) Image Resize 600X133 and copy and paste
as a New Layer. Move below the feather layer.

Layers Merge Merge Visible.

Add your ©Copyright information.  I added a slight Gradient Glow to mine.

Add your name.  On mine I duplicated and added a Gaussian Blur.

Then I added Sweet Melody with a Gradient Glow and a slight drop shadow.

PTU-Nature's Abstract

PTU-Nature's Abstract

Tube and Matching Scrapkit-I am using the BEAUTIFUL artwork of Anna
Liwanag Package 16 with the matching Scrapkit by Crazy Carita *Beautiful
Kit Carita!  Thank You for allowing me to use it!*.  You can purchase
this and other artwork at CDO.

Mask used is MB and SW Forum 2 by Moonbeams and Spiderwebs.

Font used is Lyrics Movement.

~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image

Open pp4 and copy and paste as a New Layer.  I moved this down and to the
right to get a little of the red in the upper left hand corner.  Activate
the bottom layer, Selections Select All, Activate the paper layer, Image
Crop to Selection.

Open Ele40 Image Rotate Clockwise 90. Copy and paste as a New Layer. Layers
Duplicate Adjust Blur Gaussian Blur 3.00.

Open pp9 and copy and paste as a New Layer.  Activate the bottom layer,
Selections Select All, Activate the top paper layer, Image Crop to
Selection.

Open your mask, Layers New Mask Layer from Image, Scroll to find your mask
and hit OK.  What I did is Adjust Add/Remove Noise Add Noise Gaussian
100% Monochrome checked and hit OK.

Open pp5 and copy and paste as a New Layer.  Activate the bottom layer,
Selections Select All, Activate the top paper layer, Image Crop to
Selection.

Open your mask again,Layers New Mask Layer from Image, Scroll to find your
mask and hit OK.  What I did next was Image Mirror and move it into place.

Open el4 and copy and paste as a New Layer.  I moved this up and to the
left.Activate the bottom layer, Selections Select All, Activate the string
layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer.  I moved to the right.
Activate the bottom layer, Selections Select All, Activate the tube layer,
Image Crop to Selection.

Open el3 and copy and paste as a New Layer.  I moved this below the tube
layer and down to make a bush.  I moved this to the bottom left hand side
of my tag.  Layers Duplicate, I moved this to the right a bit and down
a bit so it looks like a separate bush.  Layers Merge Merge Down (this
should make your "bushes" be on one layer.  Activate the bottom layer,
Selections Select All, Activate the bush layer, Image Crop to Selection.
I then Duplicated these again Image Mirror.

Open el26 and copy and paste as a New Layer.  I move this below the tube
layer and behind the tube to the right.  Activate the bottom layer,
Selections Select All, Activate the lights layer, Image Crop to Selection.

Open pp5 again and copy and paste as a New Layer.  Activate the bottom
layer, Selections Select All, Activate the top paper layer, Image Crop to
Selection.  
Activate your top paper layer, Selections Select All, Selections Modify
Contract 4 and hit the Delete Key once on your keyboard.  Selections
Select None.

Add your ©copyright information and Name.

FTU-Spooky

FTU-Spooky

Tube of Choice- I am using the Artwork of Martin Abel.  You can purchase
this and other Excellent artwork at CDO.

Brushes~

Tree Brushes-deviantart has lots of tree brushes. You can also google
tree brushes for paint shop pro also.

Cloud Brushes-again deviantart has lots of cloud brushes. You can also
google cloud brushes for paint shop pro also.

Stardust Brushes-deviantart has lots of star or stardust brushes. You can
also google stardust brushes for paint shop pro also.

Preset Shapes-I used a Chevron shape and an ellipse shape.  These come
with your Paint Shop Pro.

Filter used is Eye Candy 4000 Gradient Glow

Font used is Punkbabe.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is a VERY simple tutorial.

Open a 600X250 Transparent New Image.

In your Color Palette, change the foreground to #c0c0c0 and your background
to #000000 and click the tab to gradient.  Change your gradient to
Foreground-Background 0 Repeats and click on the sunburst option (round)
and click OK. Layers New Raster Layer and flood fill with your Gradient.

Open your tube and copy and paste as a New Layer.  I moved down and to
the right.  Once happy with your placement, Activate the bottom layer,
Selections Select All, click on your tube layer, Image Crop to Selection.

OK now click on your flood filled Gradient Background, Layers New Raster
layer and add your tree/tree Branch.  I did mine in the black. I duplicated
and on the top layer I added a gaussian blur of 3.

Click on your flood filled Gradient Background again.  Layers New Raster
Layer and add your stars/stardust.  I did mine in the grey.  The brush I
used I did one side and then Layers Duplicate Image Mirror/Flip.

OK Now activate your tree layer, click on your Preset Shapes and find
the one you like...I did 2 'Gravestones" using the Chevron shape and the
Ellipse shape.  My Chevron was only an outline so I had to fill it. I
then added a Gradient Glow on the headstones to make them look haunted.
I used #00ffff as my color.  I say use what you like!

With your tree layer active, Layers New Raster Layer and with the grey
color I did my clouds to look like fog.  If you want to add some above
the tube layer just add a New layer above the tube layer and do some "fog"
there.

Layers New Raster Layer and flood fill with your Foreground-Background
Gradient.  Selections Select All, Selections Modify Contract 4 and hit
the Delete Key once on your keyboard.  Selections Select None.

Once Happy with everything. Layers Merge Merge Visible.

Add your ©Copyright Information and Name.

How to use brushes

OK had a request on how to use brushes and where to store them on your computer, so here goes my attempt to explain it LOL.

What you want to do is set up a separate folder for your brushes.  and download your brushes into that folder.  In PSP you can tell it what folder you want your brushes, when you pull them up that is.

It is under File, Preferences, File Locations.  Click on Brushes and click add.  Scroll till you find your folder.

Now to use brushes is very easy...looks hard but very easy.  Open a new image what ever size you want just  to start and learn making sure you have a color on the bottom layer...let's say Black.  Click on your brush tool and grab what ever brush you want.  Layer New Raster Layer and then using a contrasting color click on your new layer and you should have whatever your brush is on that new layer.  When changing to a different brush always remember to add a New Layer.  Was very hard for me to remember the new layer when I first started playing with brushes and frustrating too but don't give up!  Once you get the hang of it brushes are fun and add the right little something to your tags.

Hope this helps a little bit in understanding brushes.  If not leave me a comment and I will try and help you more if I can.

Hugs, Staci

FTU-Devil

FTU-Devil

I am using the gorgeous artwork of Jessica Dougherty.  You can purchase
this and other great pieces of art at CDO.

Filters used are Eye Candy 4000 Corona, DSB Flux Blast, and Mosaic Glass
that is in your Paint Shop Pro Textures Effects.

I used a flowing line floral brush also. Do a google search for FTU brushes. Deviantart has some brushes there that are just beautiful.

Fonts used Guilty and Carpenter ICG

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


Open a 600X250 Transparent New Image and flood fill with Black.

Open your tube and move to where you like it.  Activate the bottom layer,
Selections Select All, Activate the tube layer, Image Crop to Selection.

Duplicate your tube and on the bottom tube layer I used Eye Candy Corona.
I used a color from the tube and just played with the numbers till I liked
it.  Then I used DSB Flux Blast. Left and Right twice at 20%. Then Effects,
Texture Effects Mosaic-Glass Number of columns/rows 50, Glass curvature 50,
Edge curvature 0, Grout width 2, Grout diffusion 50, Symmetric checked
and hit OK.

At this point I added my brush.  I used the tubes lightest flesh color and
a color from the outfit.  Activate your black layer, Layers New Raster
Layer and add your brush in the corner.  Duplicate it if necessary, then
duplicate again Image Mirror.  I then activated the black layer again,
using the outfit color and using the brush again but out a bit farther then
the first time.  Duplicate if needed.  Image Flip.  Layers Duplicate,
Image Mirror.

Add your ©copyright and licensing information. Layers Merge Merge Visible.

Add your word or name.  I typed out devil using the guilty font and
added the corona filter to that and used Carpenter to write my name.

PTU-Fairy Lights

PTU-Fairy Lights

Tube of choice-I am using the gorgeous artwork of Selina Fenech.  You
can purchase this and other equally gorgeous artwork at CDO.

Scrapkit used is the Inspired by scrapkit for this tube by Dees"Sign Depot
*Thank You Dee!  Just Gorgeous!*.  You can purchase this and other kits
by Dee at CDO.

Font Used is Moonstone.

Filter used is Mura's Meister Copies.

I used some fairy dust brushes too.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open Paper1 and copy and paste as a New Layer.  I moved this up a bit
to get some of the green on the tag.  Activate the bottom layer, Selections
Select All, Activate the paper layer, Image Crop to Selection.

Copy and paste your tube.  Open Mura's Copies and I changed the top number
to 25 and hit ok. Activate the bottom layer, Selections Select All, Activate
the tube copy layer, Image Crop to Selection.  I changed the blend mode to
overlay and changed the opacity to 30.

Open your tube again and copy and paste as a New Layer.  I moved to the
right and tried to have most of the wing visible.  Once happy, Activate
the bottom layer, Selections Select All, Activate the top tube layer,
Image Crop to Selection.

Open Element3 and copy and paste as a New Layer.  I moved it down a bit
and behind the top tube layer.  Activate the bottom layer, Selections
Select All, Activate the white flower layer, Image Crop to Selection.

Open Element6 and copy and paste as a New Layer.  I moved this up and
to the right and below the tube copy layer.  Once happy, Activate the
bottom layer, Selections Select All, Activate the butterfly layer, Image
Crop to Selection.

Open Frame2 and copy and paste as a New Layer. I moved to the left,
behind the tube and moved below the copy tube layer.  Activate the bottom
layer, Selections Select All, Activate the frame layer, Image Crop to
Selection.

Open Element11 and copy and paste as a New Layer.  I moved this below
the white flower layer and to the right.  Activate the bottom layer, Selections
Select All, Activate the lantern layer, Image Crop to Selection.

Open Element19  Image Mirror and copy and paste as a New Layer.  I moved
this to the upper right hand corner and just above the paper layer.
Activate the bottom layer, Selections Select All, Activate the tendril
layer, Image Crop to Selection.

To make the frame, Open Paper2 and copy and paste as a New Layer. Activate
the bottom layer, Selections Select All, Activate the  toppaper layer,
Image Crop to Selection. Selections Select All, Selections Modify Contract
4 and hit the delete key once on your keyboard. Selections Select None.

Now on the original paper layer, I added a layer and using a color from
the white flower, I used fairy dust brushes.  This is totally optional.

Layers Merge Merge Visible.

Add your ©Copyright Information and Name.

PTU-Reflections

PTU-Reflection

I am using the beautiful artwork of Anna Liwanag with the equally beautiful
scrapkit by LadyHawwk Designs.  They are both available at CDO.

Mask is MB and SW Forum Mask 23 by Moonbeam and Spiderwebs.

Font is Bickham Script Fancy but any curvy font will do.

Filter used is Xero Mistifier

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open LHD_Liwanag-34-Paper1 and copy and paste as a New Layer. Activate
the bottom layer Selections Select All, activate your paper layer, Image
Crop to Selection.

Open LHD_Liwanag-34-Paper13 and copy and paste as a New Layer. Activate
the bottom layer Selections Select All, activate your top paper layer,
Image Crop to Selection.

Open your mask, with your top paper layer active Layers New Mask Layer
from Image, Scroll down to find your mask and click your OK button.
Layers Merge Merge Group.

Open your tube and copy and paste as a New Layer.  I used the bigger
tube and moved it to the right.  Once you are happy with your placement,
Activate the bottom layer Selections Select All, activate your tube layer,
Image Crop to Selection.

Open LHD_Liwanag-34-Ele16 and copy and paste as a New Layer.  Move below
the mask layer. Activate the bottom layer Selections Select All, activate
your bouquet layer, Image Crop to Selection.

Open LHD_Liwanag-34-Ele33 and copy and paste as a New Layer.  Move below
the mask layer. Activate the bottom layer Selections Select All, activate
your flower bud layer, Image Crop to Selection.

Open LHD_Liwanag-34-Ele35 and copy and paste as a New Layer.  I moved
this to the bottom left hand side of the tag and moved just above the
first paper layer.  Activate the bottom layer Selections Select All,
activate your plant layer, Image Crop to Selection.

Open LHD_Liwanag-34-Ele23 Image Resize 600X321 and copy and paste as a
New Layer.  I moved below the mask layer. Activate the bottom layer
Selections Select All, activate your leaves layer, Image Crop to Selection.

Open LHD_Liwanag-34-Ele34 Image Mirror and copy and paste as a New Layer.
Move below your mask layer.  Activate the bottom layer Selections Select
All, activate your branch layer, Image Crop to Selection.

Open LHD_Liwanag-34-Ele6 and copy and paste as a New Layer.  I moved this
the the far left.  Activate the bottom layer Selections Select All, activate
your mirror layer, Image Crop to Selection.

Open your tube and copy and paste as a New Layer.  Image Mirror and move
to the left so it is in your mirror.  Activate the bottom layer Selections
Select All, activate your top tube layer, Image Crop to Selection.
With your eraser tool erase what is outside of your mirror.  Layers
Duplicate and on the bottom layer Adjust Hue and Saturation Colorize
and I changed the numbers on both sides to 0.  On the top tube layer
I did Xero Mistifier with all the numbers at 255.  Change Blend Mode to
Overlay.

To make the frame, Open LHD_Liwanag-34-Paper2 and copy and paste as a New
Layer. Activate the bottom layer Selections Select All, activate your top
paper layer, Image Crop to Selection.  Selections Select All Selections
Modify Contract 5 and hit ok.

Layers Merge Merge Visible.

Add your ©copyright information and name.