PTU-Honeybee

PTU-Honeybee

Tube of choice-I am using the GORGEOUS Artwork of Caron Vinson.  You 

can purchase this and other artwork at CDO.

Scrap kit used is the matching Inspired by Caron Vinson 58-1 by Ladyhawwk

Designs (Love this kit Cathy!!!  Thank You so much!) You can purchase this

and other Scrap Kits at CDO.

Mask used is Mask 41 MB and SW by Moonbeams and Spiderwebs.

Fonts used I used Arial Black for the word Honeybee and Respective 2.0

for the name.

~~~~~~~~~~~~~~~~~~~~~~~~

Open a 800X700 Transparent New Image.

I wrote out the word HONEYBEE in black and then stretched it out a bit.  

Selections Select All, Selections Float/Defloat, Selections Modify Contract 

2.  Layers New Raster layer and flood fill with a color from your tube.  

Selections Select None.  Activate the bottom Black layer, Layers Duplicate,

Adjust Blur Gaussian Blur 3.0 and hit OK.

With your top layer active, Copy and paste your tube.  I moved mine to 

the right a bit.

Open LHD_IB-Vinson-58-1-Ele6, Image Resize 750X256 and copy and 

paste as a New Layer.  I moved below the tube layer and down a bit.  Layers

Duplicate, Image Mirror and move below the bottom HONEYBEE layer.  I 

added a slight drop shadow to both.

Open LHD_IB-Vinson-58-1-Ele14, Image Resize 150X187 and copy and 

paste as a New Layer.  I moved below the bottom HONEYBEE layer and 

behind the O.  Layers Duplicate and I moved it over to behind the first E

in BEE.  Layers Duplicate and moved above the Yellow HONEYBEE and

moved it behind the tubes right arm.

Open LHD_IB-Vinson-58-1-Ele22, Image Resize 750X206 and copy and 

paste as a New Layer.  I moved this so it was in the middle of HONEYBEE

and moved the ribbon below the bottom black HONEYBEE.  Layers Duplicate

and I moved this above the yellow HONEYBEE.  With your eraser tool erase

some of the parts on the top ribbon to make it look like it is weaving thru

the word.  On the bottom ribbon layer I added a slight drop shadow.

Open LHD_IB-Vinson-58-1-Ele26 and copy and paste as a New Layer.  I 

moved this below the bottom ribbon layer and moved to the left and up a

bit.  I added a slight drop shadow.

With your bottom layer active, Open LHD_IB-Vinson-58-1-Paper6 and copy 

and paste as a New Layer.  Open your mask of choice, Layers New Mask

Layer from Image, Scroll to find your mask and click OK.  Layers Merge

Merge Group.  I used the Raster Deform tool and moved the top and bottom

of the mask down/up a bit.  I added a slight drop shadow.

Layers Merge Merge Visible.

Add your ©copyright and Licensing information and Name.

PTU-Go ahead, Go ask Alice

PTU-Go Ahead, Go ask Alice

Tube of Choice-I am using the artwork of Kurama Phoenix.  You can purchase
this and other GORGEOUS artwork at CDO.

Scrap Kit used is called Go Ask Alice by Hungry Hill (Such a GREAT kit
Alison!  Thank You so much!)  You can purchase this and other GREAT
kits at Treasured Scraps.

Font used is a FTU font called Beyond Wonderland.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open paper-1 and copy and paste as a New Layer (I moved down so the
lighter part of the paper was showing).  Activate your bottom layer, Selections
Select All, Activate the paper layer, Image Crop to Selection.

Open your tube (I used the close up) and copy and paste as a New Layer.
I moved to the left hand side of the tag.  Activate your bottom layer, Selections
Select All, Activate the tube layer, Image Crop to Selection.  Layers Duplicate.
On the top layer, Adjust Blur Gaussian Blur 3.0 and hit OK.  Do this one
more time.  Change opacity to Hard Light.  Layers Merge, Merge down.

Open cake and copy and paste as a New Layer.  I moved it to the bottom
right hand side of the tag so only the "Eat me" sign is showing.  Activate
your bottom layer, Selections Select All, Activate the cake layer, Image
Crop to Selection.

Open Lanterns and copy and paste as a New Layer.  I moved to the right
of the tube and below it.  I moved it so the 2 middle lanters were showing.
Activate your bottom layer, Selections Select All, Activate the lantern layer,
Image Crop to Selection.

Open vine* and copy and paste as a New Layer.  I moved to the far left and
down and to just above the paper layer.  Activate your bottom layer, Selections
Select All, Activate the vine layer, Image Crop to Selection.  Now copy and
paste the vine* again.  Image Mirror and move to just above the paper layer.
I moved it down a bit.  Activate your bottom layer, Selections Select All,
Activate the second vine layer, Image Crop to Selection.

Open falling-hearts and copy and paste as a New Layer.  I moved to the far
left hand side of the tag and just above the vine layer.  Activate your bottom
layer, Selections Select All, Activate the hearts layer, Image Crop to
Selection.

Open moon and copy and paste as a New Layer.  I moved to just above the
paper layer and to the bottom left hand side of the tag.  Activate your bottom
layer, Selections Select All, Activate the moon layer, Image Crop to Selection.

Open sparkles and copy and paste as a New Layer.  Move down so it is
just above the paper layer.  Activate your bottom layer, Selections Select
All, Activate the sparkle layer, Image Crop to Selection.

Layers Merge, Merge Visible.

Add your ©copyright information and Name.

PTU-By the lake

PTU-By the lake

Tube of choice-I am using the artwork of Jessica Dougherty.  You can purchase
this and other GORGEOUS artwork at CDO.

Scrap kit used is called By the lake by Rebel Dezigns (Thank You so much
Rene!!!!  GORGEOUS kit!!!)  You can purchase this at CDO.

Font used is a FTU font called Lyrics Movement.

~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open ScrapRD_BTL-pap9 and copy and paste as a New Layer.  I moved
down a bit to get the different colors showing.  Activate your bottom layer,
Selections Select All, Activate the paper layer, Image Crop to Selection.

Open tube of choice and copy and paste as a New Layer.  I moved to the
left and down.  Activate your bottom layer, Selections Select All, Activate
the tube layer, Image Crop to Selection.

Open ScrapRD-BTL-ele1 and copy and paste as a New Layer.  I moved
under the tube layer and to the upper left hand side of the tag.  Layers
Duplicate and I moved to the far right hand side of the tag and down.
Layers Merge Merge Down.  Activate your bottom layer, Selections Select
All, Activate the cloud layer, Image Crop to Selection.

Open ScrapRD_BTL-ele4, Image Resize 100X186 and copy and paste as a
New Layer.  I moved to the right hand side of the tag.Activate your bottom
layer, Selections Select All, Activate the bird layer, Image Crop to Selection.

Open Scrap RD_BTL-ele14 and copy and paste as a New Layer.  I moved
behind the tube and to the left so it is showing a little behind her.  Activate
your bottom layer, Selections Select All, Activate the grass layer, Image
Crop to Selection.

Open ScrapRD_BTL-ele15 and copy and paste as a New Layer.  I moved
to the bottom right hand side and moved below the grass layer.  Activate
your bottom layer, Selections Select All, Activate the water layer, Image
Crop to Selection.

Open ScrapRD_BTL-ele17 and copy and paste as a New Layer.  I moved
behind the grass layer and down so only a little is showing.  Activate your
 bottom layer, Selections Select All, Activate the sparkle layer, Image Crop
 to Selection.

Open ScrapRD_BTL-ele25, Image Mirror and copy and paste as a New Layer.
I moved to the right and made it so the flowers are showing and a little bit
of the branch is on the grass.  Activate your bottom layer, Selections Select
All, Activate the branch layer, Image Crop to Selection.

Layers Merge, Merge Visible.

Add your ©copyright and Licensing information and Name.

PTU-Inspired By...

PTU-Inspired By

Tube of Choice- I am using the GORGEOUS artwork of Jennifer Janesko.
You can purchase this and other artwork at CDO.

Scrap Kit used is the matching Inspired by Jennifer Janesko 80-2 by
Foxys Designz (OMG Ann!!!  This kit is GORGEOUS!)  You can purchase
this and other Scrap Kits by Foxy at CDO.

Font used is a FTU font called Pea Mily Mix.

~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 800X700 Transparent New Image.

Open your tube (I used the image not the png) and copy and paste as a
New Image.  Selections Select All, Selections Float/ DeFloat, Selections
Modify Expand 5 and hit OK.  With your bottom layer active, Layers New
Raster Layer and hit OK.  Flood fill with Black.  Selections Select None.

Open Element6_FD, Image Resize 730X700 and copy and paste as a New
Layer.  Move below the border layer.

Open Element1_FD and copy and paste as a New Layer.  Move down to
just above the frame layer and move toward the top of the tag.  Layers
Duplicate, Image Flip Image Mirror.

Open Element3_FD and copy and paste as a New Layer.  Move down so it
is on top of the leaves layer and move so it is toward the top of the tag.
Layers Duplicate, Image Flip Image Mirror.

Open Element4_FD, Image Mirror and copy and paste as a New Layer.
Move below the border layer and to the upper left hand side of the tag.

Open Element5_FD and copy and paste as a New Layer.  Move down below
the border layer and to the bottom right hand side of the tag.

Open Element9_FD, Image Resize 225X206 and copy and paste as a New
Layer.  I moved to the right hand side of the tag as a top layer to cover a
stem from the leaves.

Open Element10_FD and copy and paste as a New Layer.  I moved to the
bottom left hand side of the tag and below the border layer.

Open Element15_FD and copy and paste as a New Layer.  I moved down
a bit and below the border layer.

Open Element16_FD and copy and paste as a New Layer.  I moved to the
left hand side and under the border layer covering a stem from the leaves.

Open Element20_FD and copy and paste as a New Layer.  I moved to the
upper right hand side of the tag and below the border layer.

Layers Merge, Merge Visible.

Add your ©copyright and Licensing information and Name.

PTU-Midnight Imagination

PTU-Midnight Imagination

Tube of choice-I am using The artwork of Sherin Moustafa called Imagination.
You can purchase this and other GORGEOUS Artwork at DSI.

Scrap Kit used is called Midnight Spell by Honored Scraps (Such a BEAUTIFUL
Kit Patty!  Thank You so much!!!)  You can purchase this and other GREAT
Kits at Treasured Scraps.

Font used is a FTU font called Today is the Oldest and Youngest You Will
Ever Be.

~~~~~~~~~~~~

Open a 600X250 Transparent New Image.

Open Paper_05 and copy and paste as a New Layer.  I moved down a bit.
Activate your bottom layer, Selections Select All, Activate your paper layer,
Image Crop to Selection.

Open your tube of choice and copy and paste as a New Layer.  I moved to
the left.  Activate your bottom layer, Selections Select All, Activate your tube
layer, Image Crop to Selection.

Open Element_19 and copy and paste as a New Layer.  Move below your tube
layer.  I moved to the bottom right hand corner.  Activate your bottom layer,
Selections Select All, Activate your jewel splatter layer, Image Crop to Selection.

Open Element_53 and copy and paste as a New Layer.  Move below your
tube layer and down to the bottom right hand side.  Layers Duplicate, Image
Mirror.  Layers Merge Down.  Activate your bottom layer, Selections Select
All, Activate your chicken wire layer, Image Crop to Selection.

Open Element_51 and copy and paste as a New Layer.  I moved below the
tube layer and to the right bottom corner.  Activate your bottom layer,
Selections Select All, Activate your wings layer, Image Crop to Selection.

Open Element_34 and copy and paste as a New Layer.  I moved below the
tube layer and moved to the far left (the right side of the frame showing
behind the tube.)  Activate your bottom layer, Selections Select All, Activate
your jeweled frame layer, Image Crop to Selection.

Open Element_59 and copy and paste as a New Layer.  I moved below the
tube layer and to the upper right hand side of the tag.  Activate your bottom
layer, Selections Select All, Activate your moon layer, Image Crop to Selection.

Open Element_32 and copy and paste as a New Layer.  I moved below the
moon layer so only the drips were showing.  Activate your bottom layer,
Selections Select All, Activate your dripping rose layer, Image Crop to
Selection.  Layers Duplicate and with the bottom rose layer active, Adjust
Blur Gaussian Blur 3.00 and Hit the OK Button.

Open Element_13 and copy and paste as a New Layer.  Move below the tube
layer.  I moved to the right so there was a butterfly on the moon and on the
wing.  Activate your bottom layer, Selections Select All, Activate your Butterflies
layer, Image Crop to Selection.

Add a drop shadow to all but the dripping rose layers.

Layers Merge Merge Visible.

Open Paper_09 and copy and paste as a New Layer.  Activate your merged
layers, Selection Select All, Activate your top paper layer Image Crop to
Selection.  Selection Select All, Selection Modify Contract 5 and hit the Delete
key once on your keyboard.  Selections Select None.

Add your ©copyright Information and Licensing Information and Name.

PTU-Fairy Delight

PTU-Fairy Delight

Scrapkit and Tube are a bundle pack featuring the GORGEOUS artwork of
Tiffany Toland-Scott and the equally GORGEOUS Scrap Kit by Rebel
Dezigns (Thank You so much Gizzy!!!  I LOVE this kit!!!)  You can purchase
this at CDO.

Mask used is Mask 53 by Moonbeams and Spiderwebs.

Font used is a FTU font called Angels Message.

~~~~~~~~~~~~~~~~~~~~~~~

Open an 800X700 Transparent New Image.

Open ScrapRD_TTS25-fra3 and copy and paste as a New Layer.

Open your tube (I used the 3rd tube and the close up version called Out to
Dry) and copy and paste as a New Layer.  Move the tube down a bit.  You
will probably have to move the frame down too.  Move the tube so it is just
covering the bottom portion of the middle of the frame.  Duplicate the tube
and move one below the frame layer.  With your eraser tool (I recommend
hiding the bottom tube layer) and your top tube layer active, carefully erase
what is going over the top of the frame taking care with the left hand side.
Activate the bottom tube layer and erase what is showing under the frame.

With your magic wand and your frame layer active click on the inside of
your frame.  Selections Modify Expand 10.  Open ScrapRD_TTS25-pap8
and copy and paste as a New Layer.  Move below your bottom tube layer.
Selections Invert and hit the delete key once on your keyboard. Don't
Deselect yet.

Open ScrapRD_TTS25-ele6 and copy and paste as a New Layer.  Move to
just above the paper layer and move into place.  Since your Selection is
already inverted just hit Delete once on your keyboard.  Selections Select
None.

Open ScrapRD_TTS25-ele4 and copy and paste as a New Layer.
I moved to the upper right hand corner of the tag.  Move down to below
the paper layer. Layers Duplicate Image Mirror and Flip.

Open ScrapRD_TTS25-ele12 and copy and paste as a New Layer.
I moved down below the paper layer and up to the right hand corner.
Layers Duplicate, Image Mirror and Flip.

Open ScrapRD_TTS25-ele 13 Image Mirror and copy and paste as a New
Layer.  Move below the paper layer and to the bottom right hand side of the
tag. Image Rotate, Free Rotate Check Right, Check Free and put in 23.00.

Open ScrapRD_TTS25-ele32 and copy and paste as a New Layer.  Move
under the paper layer and to the upper left hand side of the tag.

With your bottom layer active, Open ScrapRD_TTS25-pap8 again and
copy and paste as a New Layer.  Open your mask, Layers New Mask Layer
from Image, Scroll down to find your mask and hit OK.  Layers Merge, Merge
Visible.  I had to make the mask a Little bigger so I did Image Resize and
changed the top number to 900 and unchecked resize all layers and hit
OK.  I moved the mask around a bit too.

Layers Merge, Merge Visible.  I like my tags to be 600 pixels so I resized.

Add ©copyright and Licensing information.  Add Name.

PTU-Serene

PTU-Serene

Tube of Choice-I am using the BEAUTIFUL artwork of Selina Fenech.  You
can purchase this and other artwork at CDO.

Scrapkit used is Inspired by Jennifer Janesko 6-2 by Schnegge's Scraps
(Thank You so much Angela!  I absolutely adore this kit!)  You can purchase
this and other scrapkits at CDO.

Font used is a FTU font called Frosting for Breakfast.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 transparent New Image.

Open Paper03_Janesko6-2_Schnegge and copy and paste as a New Layer.
I moved it down so the Beautiful decoration up top will be at the top of the
tag.  Activate the bottom layer, Selections Select All, Activate the paper layer,
Image Crop to Selection.

Open your tube (I used the one by itself) and copy and paste as a New Layer.
I moved to the left hand side of the tag.  Activate the bottom layer, Selections
Select All, Activate the tube layer, Image Crop to Selection.

Open Element01_Janesko6-2_Schnegge and copy and paste as a New Layer.
I moved behind the tube layer and down so that you would see just the leaf
that is standing straight up.  Activate the bottom layer, Selections Select All,
Activate the leaves layer, Image Crop to Selection.

Open Element03_Janesko6-2_Schnegge Image Mirror and copy and paste
as a New Layer.  Move behind the tube layer and down so it is about half
way down.  Activate the bottom layer, Selections Select All, Activate the rose
layer, Image Crop to Selection.

Open Element16_Janesko6-2_Schnegge Image Resize 120X115 and copy
and paste as a New Layer.  I moved down onto a petal on the rose.

Open Element04_Janesko6-2_Schnegge and copy and paste as a New
Layer.  Move behind the rose layer and down and to the right.  Activate the
bottom layer, Selections Select All, Activate the daisy layer, Image Crop to
Selection.

Open Element08_Janesko6-2_Schnegge and copy and paste as a New
Layer.  Move behind the leaf layer and down so you can see the top of the
candle.  Activate the bottom layer, Selections Select All, Activate the candle
layer, Image Crop to Selection.

Open Element10_Janesko6-2_Schnegge and copy and paste as a New
Layer.  Move down to just above the paper layer and to the left.  Activate
the bottom layer, Selections Select All, Activate the sheer layer, Image Crop
to Selection.

Open Element13_Janesko6-2_Schnegge and copy and paste as a New
Layer.  I moved this down and to the right and under the leaf layer.  Activate
the bottom layer, Selections Select All, Activate the streamer layer, Image
Crop to Selection.  Layers Duplicate and with the bottom streamer layer
active Adjust Blur Gaussian Blur 3.0%.

With your paper layer active Open Element15_Janesko6-2_Schnegge and
copy and paste as a New Layer.  I moved this down so the right wing is
showing behind the leaf.  Activate the bottom layer, Selections Select All,
Activate the butterfly layer, Image Crop to Selection.

Put a slight drop shadow on your elements.

Now we will make a frame.  Open Paper06_Janesko6-2_Schnegge and
copy and paste as a New Layer.  Activate the bottom layer, Selections Select
All, Activate the top paper layer, Image Crop to Selection.  Selections Select
All, Selections Modify Contract 3 and Hit OK.  Hit the Delete Key Once on
your keyboard.  Selections Select None.

Add your ©copyright and Licensing information and Name.