PTU-The Guardian

PTU-The Guardian

Tube of choice - I am using the BEAUTIFUL artwork of Michael Calandra!  You can

purchase this and other art at CDO.

Scrapkit used is by LadyHawwk Designs (Such a GORGEOUS kit Cathy!  Thank

You so much!) You can purchase this kit at CDO.

Mask used is Mask 56 MB and SW by Moonbeams and Spiderwebs.

Font used is a FTU font calles Brev Script Personal

~~~~~~~~~~~~~~~~~~~~~

Open  a New Transparent Image 800X700.

Open LHD_IB_ICalandra-20-3-Frame2 and copy and paste as a new layer.

Image Rotate, Free Rotate, Left 90 degrees and hit ok

With your magic wand click the inside of your frame to get the little ants going.  

Selections Modify Expand 10 and hit OK.  I added a new layer under the frame 

and flood filled with white.  Open LHD_IB_ICalandra-20-3-Wordart and copy and

paste as a new layer.  Selections Invert and hit the delete key once on your keyboard.

Selections Select None.

With your frame as your active layer, Open your tube (I used the one without wings)

and copy and paste as a New Layer.I moved to the center of the frame.  Move below

the frame layer.  Layers Duplicate and move the duplicated one above the frame.

With your eraser tool, erase the parts of the tube that is over the flowers and the

frame and below the frame.  Activate the duplicated tube layer and erase what is

below the frame.  If you erase too much remember the undo arrow is your best

friend!

The following make sure your top layer is active so you can see where you are 

moving the elements.

Open LHD_IB_ICalandra-20-3-Ele1 and copy and paste as a New Layer.  I moved

to the right and below the white floodfill.

Open LHD_IB_ICalandra-20-3-Ele8 and copy and paste as a new layer.  I moved

to the right of the tube and above the gear layer so that it is showing on the upper

right hand side of the frame.

Open LHD_IB_ICalandra-20-3-Ele9and copy and paste as a new layer.  I moved 

this to the bottom right hand side of the frame and moved below the gear layer.

Open LHD_IB_ICalandra-20-3-Ele11 and copy and paste as a New Layer.  I moved 

down so the beads were showing under the bottom of the tube.  Move below the

white floodfill layer.

Open LHD_IB_ICalandra-20-3-Ele19 Image Resize 227X195 and copy and paste

as a new layer.  I moved below the beads layer and to the bottom left hand side of 

the frame.

With your very bottom layer active, Open LHD_IB_ICalandra-20-3-Paper4 and 

copy and paste as a New Layer.  Open Mask 56 MB and SW.  Layers New Mask

Layers from Image.  Scroll down to find your mask and click on it and then click OK.

Layers Merge, Merge Group.

Image Resize 600X525 (the whole tag) Resize all layers checked and hit OK.

Open LHD_IB_ICalandra-20-3-Ele4 and copy and paste as a New Layer.  I moved

to the left under the rose layer.

Open LHD_IB_ICalandra-20-3-Ele15 and copy and paste as a New Layer.  I moved

behind the bottom tube layer and made it look like the tube had wings.  Yes I know 

there is an antenna showing.  Just carefully erase it with your eraser tool!

Layers Merge, Merge Visible.

Add Your ©copyright and license information and your name!

PTU-A Touch of Spring

Tube of Choice-I am using the BEAUTIFUL artwork of Jennifer Janesko!  You can purchase this and other great artwork at CDO

Kit used-I am using a BEAUTIFUL kit by Hungry Hill called Dew Drop Inn.  You can purchase this and other great kits by great designers at CDO

Mask-I used MB and SW Mask 37 by Moonbeams and Spiderwebs
Font-I used a FTU font called A song for Jennifer

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image

Open simple-frame-1 Image Resize 548X650 and copy and paste as a new layer.

With your magic wand click on the inside of your frame Selections Modify Expand 5
Open paper-1 Image resize 700X700 and copy and paste as a New Layer. Move this below your frame layer, Selections Invert and hit the delete key on your keyboard once.  Don't deselect yet!

Open your tube of choice and copy and paste as a New Layer.  I moved to the right.  With the way the frame is angled you have to work the tube so most of it is under the frame.  Once happy with the placement hit the delete key once on the keyboard.  Selections Select None.

With your frame the active layer, Open flower-string Image Resize 600X300 and copy and paste as a new layer.  Image Free Rotate Left 90 and hit ok (all layers not checked)  Image Mirror Image Free Rotate right 20 and hit OK and place on the left hand side of the frame.

With your bottom layer active Open scattered-hearts and copy and paste as a New Layer.  I moved this to the right.

With your paper layer active copy and paste branch as a New Layer.  Move to where it looks good to you behind the tube activate the paper layer, Selections Select All Selections Float/Defloat Selections Invert activate the branch layer and hit the delete key once on your keyboard.  Don't deselect!

Open tree and copy and paste as a New Layer Move to where you like it and hit the delete key once on your keyboard.  Don't Deselect!

Remember talking about the tube and the possibility they it might not all be under the frame? This is what I did...Open twig and copy and paste above the tube layer  I did Image Mirror and put the leaves so it covered the spot of the cutoff.  Once happy with your placement Hit the Delete key once on your keyboard  Selections Select None

Activate your bottom layer Open paper-10 and copy and paste as a New Layer. 

Open your mask, Layers New Mask Layer From Image scroll down to find your mask and hit OK Layers Merge Merge Group.  Layers Merge Merge Visible.

 

I resized to 600X600 All Layers.

That is it!  Add your ©Copyright info and #Licensing Number, Name and that is it!

 

Note:  If for any reason there is elements hanging off your tube making it ummm

how can I say this wonky?  Activate the bottom layer Selections Select All

click on the layer that is doing this and Selections Select All and hit the delete

key once on your keyboard and that should fix it!

PTU-Memories of Home

PTU-Memories of Home

Tube of Choice-I am using a VERY CUTE tube by Cuddly Rigor Mortis!!!  You can purchase this and other great tubes from CDO

Scrap Kit used-I am using a BEAUTIFUL kit by Hungry Hill called I Do Love Hugs. *Thank You Alison!* You can purchased this and other great kits at CDO

Mask used is MB and SW Mask 36.  You can download this and other masks at Moonbeams and Spiderwebs

Filter used is Mura's Meister Copies

Font used is a FTU Font called Orial

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image

Open lace-edging and copy and paste as a New Layer

With you Magic Wand click on the inside of the lace, Activate your bottom layer and copy and paste paper-1 as a New Layer.  Selections Invert and hit the delete key once on your keyboard.  Selections Select None

Open Fern-2 Image Resize 90% and copy and paste as a New Layer.  Move to the bottom of the edging and to the right, Layers Duplicate Image Mirror.  You will notice the stem is
sticking out.  I used my eraser tool to erase them.

Open up your tube and copy and paste as a New Layer (I used the top one) and move down on to the ferns.

Open heartstring and copy and paste as a New Layer and move this below your tube layer.
I wanted the string on the right to look like it was weaving around the fern so I duplicated and moved below the fern layer and with the top one active I used my eraser tool to do that.

Open mailbox Image Mirror and copy and paste as a New Layer. I moved it to the left and moved it just above the edging layer.

Open your tube again and you will notice that there is just a flower layer...Open a New 700X700 Transparent New Image and copy and paste that flower layer.  I used Mura's Meister Copies on this...I didn't change the preset menu at all just changed the number to 50 and hit OK.  Now activate the bottom layer of your tag and copy and paste what you just did as a New Layer.

Open your mask Layers New Mask Layer from Image scroll down to find your mask and hit OK Layers Merge Merge Group.  What I then did was used the pick tool and expand the mask so it could be seen around the edges.

Layers Merge Merge Visible.  Add your ©copyright information and your Licensing# and Name and you are done!

PTU-Inspired Seduction

Inspired Seduction

Tube of Choice-I am using the artwork of Irene Owens.  You can purchase this and other great artwork at CDO

Scrap Kit used-  I am using a BEAUTIFUL kit by LadyHawwk Scraps called Inspired by Fred Winkler Package 22 *Thank You Cathy!!!*  You can purchase this and other great kits by great designers at CDOFont used is a FTU font called Many Weatz

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image

Open LHD_InspiredBy-Winkler-22-Paper16 and copy and paste as a New Layer.I moved the paper up so that the flowers on the lower right were in the tag.  Once happy with your placement, Activate the bottom layer Selections Select all, Activate the paper layer Image Crop to Selection

Open your tube and copy and paste as a New Layer.  I moved mine down and to the right.  Once happy with your placement I activated the paper layer Selections Select All activate your tube layer Image Crop to Selection.  I then duplicated the tube and on the original (bottom) tube Adjust Hue and Saturation Colorize and change both numbers to 0  On the copy layer (top) Adjust Blur Gaussian Blur 4.00 the change the blend mode to Soft Light.  Merge the 2 tube layers together.

Open LHD_InspiredBy-Winkler-22-Element54 and copy and paste as a New Layer.  I moved this behind the tube and down to the bottom right.  Activate your paper layer Selections Select All Activate the flower layer Image Crop to Selection.

Open LHD_InspiredBy-Winkler-22-Element12 Image Flip and copy and paste as a New Layer.  I moved this down behind the tube layer.

(I used Element 2 but you can use one of the 2 that have this filigree)  Open LHD_InspiredBy-Winkler-22-Element2 and copy and paste as a New Layer.  I moved this up toward the top of the tag with the heart behind the tubes head.  I then Duplicated and moved down behind the tubes shoulder.  On this one I then Activated my paper layer Selections Select All Activate the heart layer Image Crop to Selection.

Open LHD_InspiredBy-Winkler-22-Element22 and copy and paste as a New Layer.  I moved this down behind the tubes shoulder, Once happy with placement Activate your paper layer Selections Select All Activate the X layer Image Crop to Selection.

Open LHD_InspiredBy-Winkler-22-Paper17 and copy and paste as a New Layer.  Activate your bottom paper layer, Selections Select All, Activate the top paper layer Image Crop to Selection.  With the top paper layer active Selections Select All Modify Contract 8 and hit the Delete key once on your keyboard Selections Select None.

What I did next was Layers Merge Merge Visible, Added my ©copyright and License info and Name
Hugs, Staci

PTU-Feathers and Flowers

PTU-Feathers and Flowers

Tube of Choice-Iam using the BEAUTIFUL artwork of Amy Matthews!!!!  You can purchase this and other great artwork at CDO

Scrapkit used is Spring Confidence by Foxys Desingz (Thanks Ann!) You can purchase this and other great kits at Digi Fox's Studio

Mask used is Forum Mask 9 MB and SW by Moonbeams and Spiderwebs

Font used is Cafe Lounge 19

~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image

Open Paper7_FD and copy and paste as a new layer.  Activate the bottom layer Selections Select All Click on the paper layer Image Crop to Selection.

Open Paper8_FD and copy and paste as a new layer.  Activate the bottom layer Selections Select All Activate the yellow paper layer Image Crop to Selection.

Open your mask Layers New Mask Layer, Scroll down to find your mask and hit OK Layers Merge Merge Group.

Open Border1_FD and copy and paste as a new layer.  With your Move Tool Move to where you like it and then Activate the bottom layer Selections Select All Activate the Border Layer Image Crop to Selection.

Open Doodle2 and copy and paste as a new layer.  Move this below the Border Layer, Activate the bottom layer Selections Select All Activate the doodle layer Image Crop to Selection.

Open Fan1_FD and copy and paste as a new layer.  I moved it down some.  Once happy with your placement Activate the bottom layer Selections Select All Activate the fan layer Image Crop to Selection.

Open flower3_FD and copy and paste as a new layer.  I moved to the far left.  Once happy with your placement I then duplicated, Image Mirror and moved into place.  Layers Merge Merge down Then activate the bottom layer Selections Select All Activate the flower layer Image Crop to Selection.

With your top layer activated, Open your tube of choice and copy and paste as a new layer.  I moved to the right you may choose where ever you like 8)  Once happy with your placement, Activate the bottom layer Selections Select All Activate your tube layer Image Crop to Selection.

I put a drop shadow on everything but the fan you may or may not want to do that.

Layers Merge Merge Visible.  Add your ©copyright and Licensing Info, Name and you are done!
Hugs, Staci

PTU-Romantically Rust

PTU-Romantically Rust

Tube of Choice-I am using the Artwork of Keith Garvey.  You can purchase this and other
great tubes at PTE

Scrap Kit used-I am using the BEAUTIFUL kit called Orange Rust by HF-ProjeKte *Thank You Heppy*  You can purchase this and other great kits at Scrappin Naturally

Mask of Choice-I am using MB and SW Mask 34.  You can download this and other masks at Moonbeams and Spiderwebs

Font used-I used a FTU font called Curly Fluer Caps

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image

Open PHF_Orust4 Image Resize 650X650 and copy and paste as a New Layer

With your magic wand click on the inside of the frame Selections Modify Expand 10,
Activate the bottom layer, Open PHF_Orustpaper3 and copy and paste as a New Layer.
I moved the paper till I liked what I say (bottom right hand corner of the paper is
where I moved it) Selections Invert and hit the delete key once on your keyboard.
Don't deselect yet.

Open your tube and copy and paste as a new layer.  So once happy with your placement
hit the delete key once on your keyboard.  Selections Select None.  I added a dropshadow
to the tube.

Open PHF_Orust1 Image Resize 400X400 and with your top layer active copy and paste as a New Layer.  Image Flip  I moved this so you couldn't see the edges under the frame.  Once happy with the placement move this below the paper layer Layers Duplicate Image Flip/Mirror and move into place.

Open PHF_Orust9,11,12,13 Resize them all to 200X200 and copy and paste as a New Layer. I moved them so they were peeking above the corner layer.

With your top layer active, Open PHF_Orust14 Image Resize 200X200 and copy and paste as a New Layer.  I moved so it looks like the flower is behind the tubes ear.  I added a drop shadow also.

Open PHF_Orust35 Image Reseize 300X290 Image Mirror and copy and paste as a New Layer. I moved up and to the left and moved under the paper layer.

Open PHF_Orust15, 17, 18 Image Resize 200X200 and copy and paste as a New Layer.  Arrange to your liking. I ended up using my eraser tool to erase most of the greenery on PHF_Orust 17.

Activate your bottom Layer, Open PHF_Orustpaper8 Image Resize 700X700 and copy and paste as a New Layer.  Open your mask, Layers New Mask Layer From Image, Scroll to find your mask and hit OK. Layers Merge Merge Group.  I move the mask a little bit to the right.

Once happy with your placement, Layers Merge Merge Visible. I like my tags 600X600 so I resized.

Add on your ©copyright info and Licensing info and Name and that is it!

PTU-Midnight Dreams

PTU-Midnight Dreams

Tube of Choice-I am using the GORGEOUS artwork of Anna Marine!  You can purchase this and others at CDO

Kit used is called Midnight Dreams by Foxy's Desingz. Thanks Ann!  This kit is GORGEOUS!  You can purchase this and other great kits at Digi Fox's Studio

Mask used is MB and SW Mask 33.  It is a FTU Mask and can be downloaded at Moonbeams and Spiderwebs

Font used is a FTU font called Pea Thinksilver

Filters used are Gradient Glow (for © copyright info) and Alien Skin Drip

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image

Open Paper10_FD and copy and paste as a New Layer. Open your mask, Layers New Mask Layer From Image, scroll to find your mask and hit OK.  Layers Merge Merge Group.

Open Sparkles_FD Image Resize 650X650 and copy and paste as a New Layer.

Open your tube and copy and paste as a New Layer.  I moved down and to the left a bit.
I also added a dropshadow.

Open Moon_FD Image Resize 250X278 and copy and paste as a New Layer.  Move it up and to the right.  Move this blow your tube layer.

Open Leaves1_FD Image Resize 352X600 and copy and paste as a New Layer.  Move below your tube layer and to the left a bit.

Open Flower1_FD Image Resize 250X250 and copy and paste as a New Layer.  I moved this up and to the left so it was on the leaves and showing above the tube layer.

Open Jewel1_FD and copy and paste as a New Layer.  Move this down and move below the bead layer.

Open Star2_FD and copy and paste as a New Layer.  I moved this down and to the right a bit and moved this below the jewel layer.

Open Splash1_FD and copy and paste as a New Layer.  I moved down and to the right and moved above the mask layer.

Open Drops_FD and copy and paste as a New Layer.  I moved up and to the right and moved down above the splash layer.

Open Bead1_FD and copy and paste as a New Layer.  I moved down and to the left and moved down below the tube layer.

Open Bead2_fd and copy and paste as a New Layer.  I moved to the right and moved below the tube layer.

Open Tears_FD and copy and paste as a new Layer.  I moved so the top tear is falling from the top of the moon and move so it is above the moon layer.

I like my tags 600X600 so I resized.  Added my © copyright and License info and added my name.  I used Alien Skin Eye Candy 5 Nature Drip with the setting of Small, Streaks.



Hugs, Staci

PTU-The Land of Nod

PTU-The Land of Nod

Tube of Choice-I am using the artwork of Jessica Dougherty.  You can purchase this and other BEAUTIFUL tubes at CDO
Scrap kit used is call Land of Nod by Lins Creations, *Love this kit Lins*  You can purchase this kit and other GREAT kits at Scrappin' Naturally

Mask used is MB and SW Mask 21.  You can download this at Moonbeams and Spiderwebs

Font used is a FTU font called Angelic War

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image

Open LC_Land of Nod_elements (52) Image Resize 650X270 and copy and paste as a new layer. Move this toward the bottom of your tag.  Once happy with your placement I duplicated and the top copy layer Adjust Blur Gaussian Blur 4.00 and change your Blend Mode to Soft Light. Layers Merge Merge Down.

Open your tube and copy and paste as a New Layer.  Move this behind the hill.  Once happy with your placement, Layers Duplicate and again on the top copy Adjust Blur Gaussian Blur 4.00 and change your blend mode to Soft Light. On the original layer I put a small dropshadow.

Open LC_Land of Nod_elements (53) Image Resize 650X426 and copy and paste as a New Layer. I moved it up slightly.  Once happy with your placement Layers Duplicate and on your copy layer Adjust Blur Gaussian Blur 4.00 and change your Blend Mode to Soft Light.  I put a small dropshadow on the original layer. Merge these together and move it behind yout tube layer.

Open LC_Land of Nod_elements (33) Image Resize 437X650 and copy and paste as a New Layer. Move this behind your tube layer and to the left a bit.  Use your eraser tool to erase any showing under the hill layer.  Once happy with your placement I duplicated and on the copy layer Adjust Blur Gaussian Blur 4.00 and merge these together.

Open LC_Land of Nod_elements (22) (23) (24) Resize them all to a width of 200 and copy and paste as a New Layer.  Move these around to where you like.  Move these below the tree layer.

Open LC_Land of Nod_elements (16) Image Resize 500X498 and copy and paste as a New Layer. I moved it to the right and under the cloud layers and them moved the clouds around it.

Open LC_Land of Nod_elements (30) Image Resize 650X207 and copy and paste as a New Layer. I moved this around to where I liked it and then moved it below the tube layer. I then Duplicated and on the copy layer Adjust Blur Gaussian Blur 4.00

With your bottom layer active Open LC_Land of Nod_paper (18) and copy and paste as a new layer.  Open your mask Layers New Mask Layer from Image, scroll to find your mask and hit OK.  I moved my mask layer around a bit.

Once happy with your tag, Layers Merge Merge Visible.  I resized to 600X600 added my
©copyright and License info and name and that is it!

Hugs, Staci

PTU-Clubbin'

PTU-Clubbin'

Tubes of Choice-I am using the artwork of Pinuptoons!  You can purchase these and other great tubes at CDO
Scrapkit used is Bitch Club by Foxys Designz!  Thank You Ann!  You can purchase this and other great kits at Digi Fox's Studio

Mask of choice-I am using a FTU Mask.  MB and SW Mask 21 by Moonbeams and Spiderwebs

Font of Choice-I am using a FTU font called Angry Blue

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image

Open Element10_FD and copy and paste as a new layer.

Open Paper2_FD and copy and paste as a new layer.  Open your mask Layers New Mask Layer From Image Scroll to find your mask and hit ok.  Layers Merge Merge Group.

Open your tubes and copy and paste them all as new images.  I duplicated them and on the
original layer I added a drop shadow and on the duplicated layer I did Adjust Blur Gaussian Blur or 4.00.

Open Element5_FD Image Resize 79X400 and copy and paste as a new layer.  I moved to the left a touch.

Open Element8_FD Image Resize 450X399 and copy and paste as a new layer.

Open Element9_FD Image Resize 215X250 and copy and paste as a new layer.  I moved to the right Layers Duplicate Image Mirror and then Layers Duplicate and moved it up so it was on top of the other 2 speakers.

Open Element22_FD Image Resize 700X193 and copy and paste as a new layer.  Move this down above your mask layer.

Open Element3_FD Image Resize 215X75 and copy and paste as a new layer.  Move this to the right side of your top speaker.  Layers Duplicate Image Mirror.

Open Element36_FD and copy and paste as a new layer.  Move to the Bottom.

That is it!  We are done!  If all happy with you placement Layers Merge Merge Visible.
I like my tags 600X600 so I resize.
Add your ©Copyright and Licensing info and your name and you are done!

Hugs, Staci

PTU-Naturally

PTU-Naturally

Tube of choice-I am using artwork by Barbara Jensen.  You can purchase this tube and others at her STORE

Kit used-I am using a Full Size kit by Zlata Designs call Autumn In My Heart.  You can purchase this and other great kits at Scrappin' Naturally

I used 2 Masks, MB and SW Mask 2 and MB and SW Mask 30.  Both are FTU masks at
Moonbeams and Spiderwebs

Font used is a FTU font called Simply Glamorous

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image.

Open ZlataDesigns_AutumnInMyHeart_el(30) Image Resize 600X595 and copy and paste as a new layer.

Open ZlataDesigns_AutumnInMyHeart_pp(5) Image Mirror Image Resize 700X700 and copy and paste this under your frame layer.  I moved it down so part of the dark was in the frame Selections Invert and hit the delete key on your keyboard once.  Selections Select None.

Open ZlataDesigns_AutumnInMyHeart_el(9) Image Resize 300X195 and copy and paste this above your frame layer.  I moved it to the upper left of the frame, put a dropshadow
of choice on it and the layer Duplicate mirror/flip and moved on the bottom of the frame.

Open ZlataDesigns_AutumnInMyHeart_el(42) Image Resize 300X278 and copy and paste as a new layer.  I moved this to the bottom left hand side of the frame.

Open ZlataDesigns_AutumnInMyHeart_el(48) and copy and paste this above your frame paper layer.  I moved it so that it half covered that area the Layers Duplicate Image Mirror and moved it down so it covered the area.  Merge these together and activate your paper layer Selections Select All Selections Float/Defloat Selections Invert activate the white flower layer and hit the delete key once on your keyboard.  Selections Select None.  Change the opacity to 75%.

Open ZlataDesigns_AutumnInMyHeart_el(20) Image Mirror Image Resize 450X232 and copy and paste as a new layer.  Move to the bottom of the frame and under the wood flower layer.

Open ZlataDesigns_AutumnInMyHeart_el(10) Image Flip and copy and paste as a new layer.  I moved down on top of the branch layer.

With your frame layer active, copy and paste your tube as a new layer. You might need to use your eraser tool to erase bits that are showing on the bottom.

Open ZlataDesigns_AutumnInMyHeart_el(39) Image Resize 141X300 and copy and paste as a new layer. I moved this to the right hand side of the frame.

Open ZlataDesigns_AutumnInMyHeart_el(6) Image Resize 274X450 and copy and paste as a new layer. Move to the left and move under your wood flower layer.

with your bottom layer activated, Open ZlataDesigns_AutumnInMyHeart_pp(2) Image Resize 700X700 and copy and paste as a new layer.  Open MB and SW Mask 2, Layers New Mask Layer from Image, Scroll down to find your mask and hit OK. Layers Merge Merge group.  I moved this up toward the top of the tag.

Open ZlataDesigns_AutumnInMyHeart_pp(4) Image Resize 700X700 and copy and paste as a new layer. Open MB and SW Mask 30 Layers New Mask Layer from Image scroll and find your mask and hit OK Layers Merge Merge Group. Whate I did was Duplicate this mask layer and moved it down toward the bottom of the tag.

If happy with your placement of everything Layers Merge Merge Group.

I like my tags 600X600 so I resized and put on my ©copyright and Licensing info, Name and that
is it!

Hugs, Staci

PTU-Rock On!!

PTU-Rock On!!

Tube of Choice- I am using a close up tube by Ismael Rac.  You can purchase this and
other BEAUTIFUL artwork by him at his store XERACX

Kit used is called Rock On by AngelsDesigns *Thank You Kelly!!!  Beautiful kit as always*
You can purchase this and other great kits at Digi Fox's Studio


Mask used is MB and SW Mask 23 from Moonbeams and Spiderwebs
Font used is TrashBarusa a FTU font.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Trasparent New Image

Open AD_Frame1 and copy and paste as a new layer.

With you magic wand click on the inside of your frame, Open AD_Paper5 and copy and
paste as a new layer.  Move beneath your fram layer Selections Invert and with the
paper layer active hit delete once on your keyboard.  Selections Select None.

Open your tube and copy and paste as a new layer.  I had to resize the tube by 90%.
Layers Duplicate and make sure that you have 1 tube above your frame and one below.
Activate your top tube, Activate your eraser tool and erase some of the bottom so
you can see your frame.  Activate that bottom tube and if you need to erase some of
that tube thru the stars on the frame.

Open AD_GlitterTrail and copy and paste as a new layer. what I did was move it up
and to the left and moved it to the bottom, Layers Duplicate Image Mirror Flip

Open AD_DiscoBall Image Resize 50% and copy and paste as a new layer.  Move up and
to the right and move to the bottom.

With your top layer active, Open AD-Sparkles1 and copy and paste as a new layer.  I
moved to the right and moved it under the top tube layer and on the right side of the
Frame.  I then duplicated and flipped to move it on the bottom of the frame.

Open AD_Wire and copy and paste as a new layer.  I moved it to the upper right side of
the tag Layers Duplicate Image Mirror/Flip.  Once happy with your placement Merge them
together and move to the bottom layer.

Open AD_Music and copy and paste as a new layer.  I moved this to the bottom of the tube
once happy with placement I duplicated and moved one below the top tube and then activated
the top music and eraser the part covering the arm.

Open AD_Paper12 and copy and paste as a new layer.  Open your mask Layers New mask layer from Image Scroll to find your mask and hit OK.  I moved this to the right Layers Merge Merge Group. I then opened AD_Paper16 and copy and paste as a new layer.  I did the same mask Layers Merge Merge Group.  Image Flip and moved to the left.  Layers merge group I merged these together and them moved to the bottom layer.

If happy with everything Layers Merge Merge Visible.

I like my tags 600X600 so I resized.  Add your ©copyright and Licensing info.  Add your name and you are done!

Hugs, Staci

PTU-Sweet Purple

PTU-Sweet Purple

Tube of Choice-I am using a BEAUTIFUL tube by Ismael Rac!  You can purchase this and other beauties at XERACX

Kit used-I am using a BEAUTY call Purplex by Dazzling Scraps (Thank You Danielle!)  You can purchase this and other great kits at Scrappin Naturally

Mask-I am using Forum Mask 14 MB and SW by Moonbeams and Spiderwebs

Filter I used is Mura's Meister Copies Wall Paper(perspective)

Font used is Simply Adorable.  It is a FTU font.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image

Open Paper 19 and copy and paste as a new layer.  Activate the bottom layer Selections
Select All click on the paper layer Image Crop to Selection.

Layers New Raster Layer and flood fill with white Open your mask and Layers New Mask
Layer From Image, scroll down to find your mask and click OK.  Layers Merge Merge Group

Open Flower Doodle 3 and copy and paste as a new layer.  Effects Mura's Meister Copies
Under the picture scroll to find Wall Paper(perspective) and change the number to 5 and
click OK click on the paper layer Selection Select All click on the Doodle layer Image
Crop to Selection.

Open Flower with button 1 Image Resize 50% and copy and paste as a new layer.  (Move it off center as you will be doing this with 3 different flowers)  Effects Mura's Meister
Copies You will be using the same wall paper so just click on the picture and it will arrange it differently and hit OK. Click on the paper layer Selections Select All Click on the flower layer Image Crop to Selection.  Repeat this with Flower with button 2 and 3...Move these below your mask layer.

With your top layer active copy and paste your tube of choice (I used the medium sized tube) I moved her to the left after I Image Mirror.  Once happy with the placement activate your paper layer Selections Select All click on the tube layer Image Crop to Selection.

Open Fan 1 and copy and paste as a new layer.  I moved to the bottom right.  Activate the
paper layer Selections Select All click on the fan layer Image Crop to Selection.

What I did next was copy and paste Flower with leafs 1 2 and 3 and copy and paste and arranged behind the fan activating the paper layer after each one Selection Select All clicking on those flowers and the Image Crop to Selection.

That is it!  Merge All!  Add your ©Copyright and Licensing info and add your name and that is it!
Hugs, Staci

PTU-I'm not Broken

PTU-I'm not Broken

Tube of Choice- I am using a BEAUTIFUL tube by Elias Chatzoudis.  You can purchase this and other great tubes at PTE
Kit used I'm not Broken by Broken Sky Dezines *Thank You Tonya!* You can purchase this kit and others at Digi Fox's Studio

Filter used Mura's Meister Copies Wall Paper(perspective)

Font used is SA_Kiss.  It is a FTU font.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image

Open BSD10 in elements copy and paste as a new layer.  Activate your bottom layer Selections Select All click on the background layer Image Crop to Selection

Open BSD15 in elements and copy and paste as a new layer.  Effects Mura's Meister Copies Under the picture scroll down to Wall Paper(perspective) and make sure the number is on 20 and hit ok. activate the bottom layer Selections Select All click on the sparkle layer Effects Crop to Selection.

Copy and paste your tube as a new layer (I used the close up) add a dropshadow, activate
that bottom layer again Selections Select All activate the tube layer Effects Crop to
Selection.

Open BSd47 and copy and paste as a new layer Change the Blend Mode ot Overlay Activate the bottom layer Selections Select All Activate the keyboard Effect Crop to Selection.

Open BSD16 and copy and paste as a new layer.  I moved it to the upper right of my tag.
If you move it partially off of the tag activate the bottom layer Selections Select All
Activate the Moon layer Effects Crop to Selections.

Open BSD14 and copy and paste as a new layer You might want to duplicate once or so to see it a little better.  What I did was duplicate it once and merged them together and moved it up on the tag making sure it was below the tube layer, and them duplicated that and then Image flip.

Open BSD22 and copy and paste as a new layer.  Move it up so the stars are showing and it is behind the tube.  Once happy with your placement activate the bottom layer Selections Select All activate the stars layer Effects Crop to Selection.

Here is what I did for the border.  I duplicated the bottom (black background layer) and moved that to the top.  Selections Select All Modify Contract 8 and hit the Delete Key once on my Keyboard.

Layers Merge Merge Visible.

Add on your ©copyright info and Name and you are done!

PTU_Behind the Rainbow

PTU-Behind the Rainbow

Tube of Choice-I am using a BEAUTIFUL tube by Constanza Ehrenhaus!  You can purchase this and other great tubes at PSPTubeStop

Kit used is called Over the Rainbow.  It can also be purchased at PSPTubeStop

Font used is a FTU font called Moonstone

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 Transparent New Image

Open shamrockframeGreen and copy and paste as a new layer.

I chose 2 colors from my tubes background but you can use a bachground paper if you choose, either with you magic wand or what I did was use the freehand selection tool to draw on the frame for your background.  Layers New Raster Layer copy and paste your background Selections Invert and hit the Delete Key once on your keyboard(New Raster Layer and flood fill your selection) Move this below your frame layer.

Copy and paste your tube as a new layer.  I duplicated and moved one layer above the frame and with my eraser tool, I erased what was on the frame.

Open Shamrock-design4 and copy and paste as a new layer.  Move this down so it is on top
of your paper layer.

What I did was open Spartkles_2 and copy and paste as a New Layer and moved this on top of my frame...I duplicated lots of times so I had enough to cover the frame..I then merged all these together activated the frame layer Selections Select All Float/DeFloat Invert, activated the sparkle layer and hit Delete once on my keyboard.

Open Ribbons-double-bow-Orange and copy and paste as a New Layer.  I moved down and to the left so it was on the corner  Duplicate, Adjust Blur Gaussian Blur 4.0  on the bottom layer I put a dropshadow and on the top layer I changed the Blend Mode to Soft Light.

Open Shamrock-cluster-It and copy and paste as a new layer.  I moved it up and right. Once happy with that placement Layers Duplicate and move down and to the left.  Merge these and move to the bottom.

Do the same with the WhiteDaisyCluster.

Open Daffodil4 and copy and paste as a new layer.  I moved this down and behind the tube layers.

I resized to 600X600 and decided to add Rainbow1...I copy and pasted as a new layer Image mirror and moved behind the tube layer.

Layers Merge Merge Visible  Add your ©copyright and License info and name

PTU-Love is in my Heart

PTU-Love in my Heart

Tube/Kit used is ScrapLHD_PinUpToons-Package-143 This is a BEAUTIFUL combination of tubes and scrap kit provided by CDO

Mask used is MB and SW Mask 25 by Moonbeams and Spiderwebs

Font used is 13th Ghostwriter JRZ.  It is a FTU font and you can get it at Fontspace

Filters used Mura's Meister Copies

~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 transparent New Image

Open ScrapLHD_PUT143-Paper3 and copy and paste as a new layer.

Open your mask Layers New Mask Layer scroll down to find your mask and then hit OK

Open ScrapLHD_PUT143-ele24 and copy and paste as a new layer.  Image Flip. Effects
Mura's Meister Copies.  Under the picture of the flowers is a scrolling arrow, find encircle, on the right hand side change the Number to 5 and click ok and you now have a frame!

Open ScrapLHD_PUT143-Paper14 and copy and paste as a new layer.  Move under the flower frame...I moved it around so some of the decorations on the paper were showing.

With your Freehand Selection Tool draw around the frame Selections Invert make the paper layer active and hit the delete key once on your keyboard.

Open ScrapLHD_PUT143-ele22 and copy and paste as a new layer.  I moved it up and to the right, Layers Duplicate and moved it down to the left.  Merge these 2 layers and move under the frame layer.

Open ScrapLHD_PUT143-ele16 and copy and paste as a new layer.  I moved it up and to the left and moved it under the frame and paper layer.  Once happy with placement Layers Duplicate Layers Mirror Layers Flip

Open ScrapLHD_PUT143-ele25 and copy and paste as a new layer.  I used my eraser tool and erased stem and then moved this under the frame layer

Open ScrapLHD_PUT143-ele49 and copy and paste as a new layer.  I moved this below the frame layer.

Open ScrapLHD_PUT143-ele14 and copy and paste as a new layer.  Effects Mura's Meister Copies with the same setting we did for the flowers. and hit OK.  Move this below your frame and paper layers but above the mask layer.

Open ScrapLHD_PUT143-wordart3 and copy and paste as a new layer.  I moved this down and to the right.  Once happy with your placement Layers Duplicate and move up and to the left.

With your frame layer active coy and paste your tube of choice.  Layers Duplicate and move that below your frame.  with the top tube activated use your eraser tool to erase parts of the tube so your frame is visible...You might have to erase a bit of the bottom tube also.  If you do a drop shadow you will want to do this to your bottom layer .

Once happy with everything layers Merge merge visible.  I like my tags 600X600.
Add your © copyright/license info and name and you are done!

Hugs, Staci
and name and you are done

FTU-Rac's Day Dream

FTU-Rac's Day Dream

Scrapkit of Choice- I am using a Freebie by KakleiDesigns called Days like These

Tube of Choice- I am using Dream Girl by Ismael Rac that you can purchase at his
store XeracX

Font of Choice- I am using a FTU font called isadora
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 700X700 New Transparent Image

Open kakleid_dayslikethis_(6) Image Resize 378X600 and hit ok  Image Rotate Left and copy and paste as a new layer.

Open kakleid-dayslikethis_(9) and copy and paste as a new layer.  Move this below your
frame layer.I know it is huge but  this is gonna be for the background so once you find
what you like activate your frame layer, I used the selection tool (rectangle, add(shift)
0  feather) and outline on the inside of your frame making sure you are on the frame
itself not on the inside or outside.  Once happy activate the rock layer, Selections Invert
but don't hit Delete yet.

Open kakleid-dayslikethis_(1) Image Resize 550X312 and copy and paste as a new layer.
Move to where you like it and layers merge down and hit Delete on your keyboard.

Open your tube (out of the 3 sizes that come with this tube I used the middle one) and
copy and paste as a new layer.  move to the right so it lines up with the frame.

Open kakleid_dayslikethis_(5) Image Resize 600X389 and copy and paste as a new layer.  I moved it to the bottom layer and moved to where I like it.

Open kakleid_dayslikethis_(2) Image Resize 378X331 and copy and paste as a new layer.  I moved this one behind the frame layer Layers Duplicate Image Mirror/Flip and moved this one up under the tube layer.

Open kakleid-dayslikethis_(13) Image Resize 550X521 and copy and paste as a new layer.  I moved to the left and them moved below the frame layer.  Layers Duplicate Image Mirror/Flip and move to where you like it.

Open kakleid_dayslikethis_(11) Image Resize 550X386 and copy and paste as a new layer
If need be move to the top so you can see better.  I moved this to the left a bit and down so you could see the bottom.  Once happy layers Duplicate Image Mirror/flip and move that part to where you like it. merge the 2 layers together and move to the bottom.

Once happy with everything Layers Merge Merge Visible add your ©Copyright info and Name and you are done.

Hugs, Staci

PTU-Lost Soul

PTU-Lost Soul

Tube of choice- Iam using the artwork of Anna Marine.  You can purchase this and other BEAUTIFUL tubes by Anna Marine at CDO
Scrap Kit used- I am using the WONDERFUL kit Emo Angel by LadyHawwk Scraps (Thank You soooo much Cathy!!!)  This is part of a collab kit that you can purchase this kit and other great kits at Digi Fox's Studio

Mask used- I am using Forum Mask9 MB and SW by Moonbeams and Spiderwebs

Font used- I used Clive Barker.  It is a FTU font that you can get at DaFont

I also used Alien Skin Xenofex2- Constellation.  I can't find a place to download it but I will give you the settings that I used.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image

Open LHD_EmoAngel_Collab_Paper16 and copy and paste as a new layer.  I really like the decoration on the bottom left so I moved the paper so it was showing.  Once happy with your placement activate your very bottom layer Selections Select All  Activate your paper layer Image Crop to Selection.

Open LHD_EmoAngel_Collab_Paper8 and copy and paste as a new layer.  Activate that bottom layer Selections Select All activate the white paper layer Image Crop to Selection.

Open your mask and with your white paper layer active Layers New Mask Layer From Image scroll down to find your mask and hit ok Layers Merge Merge Group.

OK here is what I did with the mask. I duplicated and on the bottom layer I added constellation
with these details:

Open your tube and copy and paste as a new layer.  Add a drop shadow and activate your bottom layer Selections Select All click on your tube layer Image crop to Selection.

Open LHD_EmoAngel_Collab_Element11 and copy and paste as a new layer.  I moved this up and to the right behind the tubes head.  Activate that bottom layer Selections Select All activate the flower layer Image Crop to Selection.

Open LHD_EmoAngel_Collab_Element13 and copy and paste as a new layer.  I moved so the top part was behind and hidden by the tubes wing.  Once happy with placement, Activate that bottom layer Selections Select All activate the flower ball layer Image Crop to Selection.

Open LHD_EmoAngel_Collab_Element41 and copy and paste as a new layer.  I moved it down and also under the flower ball layer.  Once happy with placement, Activate that bottom layer Selections Select All activate the bow layer Image Crop to Selection.

Open LHD_EmoAngel_Collab_Element19 and copy and paste as a new layer.  I moved this down and to the left under the bow layer  Once happy with your placement, Activate that bottom layer Selections Select All activate the wing layer Image Crop to Selection.

Open LHD_EmoAngel_Collab_Element28 and copy and paste as a new layer.  I moved this down and to the left.  Once happy with placement Activate that bottom layer Selections Select All activate the crossed bones layer Image Crop to Selection.

Layers New Raster Layer Selections Select All Open LHD_EmoAngel_Collab_Paper17 Copy and paste into Selection Selection Modify Contract 8 and hit the delete key once on your keyboard.

At this point you need to add your © copyright information and name and you are done!

PS for the name I duplicated it added the same constellation settings duplicated the top layer and moved it to the bottom and added a drop shadow

PTU-Puppy Love

PTU-Puppy Love

Tube of Choice- I am using a cute puppy tube from Maryline Cazenave!  You can purchase this and other great tubes at CDO.

Scrap Kit- I am using LHD Scraps Scrap Kit called My Heart It Beats!  Thank You so much Cathy! You can purchase this and other great kits at Digi Fox Studios

Mask used- I am using Forum Mask 14 MB and SW by Moonbeams and Spiderwebs

Font used- Pea Snoflake  This is a FTU font and can be downloaded at  KevinandAmanda.com
Filter used- I used Mura's Meister Copies Wall Paper(Perspective)  I don't have a link for you tho...sorry.

~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 Transparent New Image

Open LHDScrapsValentine1-paper11 and copy and paste as a new layer.  Click on the bottom layer, Selections Select All Selections Invert click on the paper layer and Image Crop to Selection

Open LHDScrapsValentine1-ele54 and copy and paste as a new layer.  Effects Mura's Meister copies below the picture of the rose scroll down to find Wall Paper(perspective). on the right change the Number to 50 and hit OK.  Activate the bottom layer, Selections Select All Selections Invert and activate the rose layer Image Crop to Selection

Open LHDScrapsValentine1-paper9 and copy and paste as a new layer.  I moved it up a bit to get some of the red in the tag.  Click on the bottom layer, Selections Select All Selections Invert click on the paper layer and Image Crop to Selection

Open your mask, Layers New Mask Layer from Image, scroll down to find your mask and hit ok. Layers Merge Merge Group.

Open LHDScrapsValentine1-ele27 Image Resize and change the width to 600 (the height will automatically change for you) and then hit ok.  Copy and paste as a new layer.  What I did is, I duplicated this and on the bottom layer I added a dropshadow and the top layer I did Adjust Blur Gaussian Blur 3.00 then changed the blend mode to soft light.


Open LHDScrapsValentine1-ele42 and copy and paste as a new layer.  I moved it so that the butterflies were showing on the right.  Once happy with placement, activate your bottom layer Selections Select All Selections Invert activate the butterfly layer and Image Crop to Selection

Open LHDScrapsValentine1-ele16 and copy and paste as a new layer.  Activate the bottom layer Selections Select All Selections Invert activate the bubble layer and Image Crop to Selection

With your top layer active, Layers New Raster Layer and choose a color from your tube.  I chose the color from the glasses.  With your Flood Tool active, flood the layer with your choice of color.  Selections Select All Modify contract 8 and hit the delete key once on your keyboard.

Open your tube and copy and paste as a new layer.  I move mine to the left.  once you have your tube where you want it activate the bottom layer Selections Select all activate your tube layer Image Crop to Selection.

Layers Merge Visible, put on your ©copyright info and License # and Name and you are done!

PTU-Secret Love

PTU-Secret Love

Tube of Choice- I am using a beautiful tube by Anna Marine, You can purchase this and others at CDO

Scrapkit used- I am using Hungry Hills I Do Love Hugs that can also be purchased at CDO

Filter used Alien Skin Xenofex 2 Contellation (sorry I can't find a link to it)

Mask used MB and SW Mask 21 from Moonbeams and Spiderwebs
Font used Bleeding Cowboys

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a New Transparent Image 700X700

Open paper-6 and copy and paste as a new layer.
With your mask open and paper layer active, Layers New Mask Layer from Image and hit ok Layers Merge Merge Group.  What I did was Duplicate the mask layer and on the bottom layer I added Xenofex 2 Constellation With the following settings-
Star Size 2.00
Size Variant 19
Edge Star Density 27
Overall Star Density 5
Overdrive 100
Twinkle Amount 75
Keep original image and hit OK
On the Top Layer Make the blend mode Overlay and Layers Merge Down

Open bonsai and copy and paste as a new layer.  I scooted it down toward the bottom of the tag.

Open bench and copy and paste as a new layer.  I moved to the bottom of the tag.

Open tube and copy and paste as a new layer.  I moved her so it looks like she is sitting on
top of the bench.

Open sweetpea and copy and paste as a new layer.  I moved to the right and moved so it was above the mask layer.  Once happy with placement Layers Duplicate, Image Mirror Image Resize 85% all Layer NOT Checked.  I had to erase a bit of the bottom of this. Move this above the mask layer.

Open fern-2 and copy and paste as a new layer.  I moved to the right and down a touch
Layers Duplicate Image Mirror Image Flip and move up a touch.  I erased the stem showing.

And that is it! Once happy with the look Layers Merge Visible

Important to put your © copyright and License number on for your tube and them put your
name on it!

Hugs, Staci

PTU-Papillon

PTU-Papillon

Tube of Choice- I am using the beautiful artwork of Anna Marine. you can purchase this or other great artwork at CDO.

Scrap Kit used is part of a collaberation called Braylin.  I am using Angel's Designz portion (Beautiful Kelly!  Thank You!) this and other great kits can be purchased at Digi Fox's  Studio
Mask used- I used Forum Mask 6 from Moonbeams and Spiderwebs

Font of choice- I am using Trinigan FG from Fontspace

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Open a 600X250 New Image

Open AD_Paper8 and copy and paste as a new layer.  I moved it down to get the moon and part of the leaves on my tag.  Once happy go the the bottom layer (you will be doing this alot) Selections Select All click on the paper layer Image Crop to Selection.
Open AD-Paper12 and copy and paste as a new layer. Open Forum Mask 6 MB and SW
Layers New Mask Layer from Image Scroll down to find your mask and click ok.  Layers Merge Merge Group.

Open your tube (I used the close up tube) and copy and paste as a new layer.  I moved mine to the left.  Once happy with your placement, Activate the bottom layer Selections Select All Click on the tube layer Image Crop to Selection.

Open AD_Circles and copy and paste as a new layer.  I chose to have this above my tube layer. Move to where you like it once happy, Layers duplicate Image Mirror Layers Merge down. Activate the bottom layer Selections Select All Click on the Circle layer Image Crop to Selection.

Open AD_Twig and copy and paste as a new layer.  I moved this behind my tube and dowm to the right.  Once happy with it Layers Duplicate, I put a drop shadow on the bottom layer and on the top layer Adjust Blur Gaussian Blur 3.00 and changed the Blend Mode to Soft Light Layers Merge Merge Down. Activate the bottom layer Selections Select All click on the twig layer Image Crop to Selection.

Open AD_Flower2 and copy and paste as a New Layer.  I moved this behind the twig layer and down (See my tag for my placement) once happy with it, Activate the bottom layer Selections Select All Click on the flower layer Image Crop to Selection.

Open AD_Branch Image Mirror and Copy and Paste as a new layer.  I moved to the right Layers Duplicate I added a dropshadow to the bottom layer and the top layer added the Gaussian Blur Layers Merge Merge Down Layers Duplicate Image Mirror Layers Merge Merge Down. Activate the bottom layer Selections Select All Click on the branch layer Image Crop to Selection.

I did this with the top layer active...Better to see the placement.  Open AD_Sparkles and copy and paste as a new layer. I moved it to the left and then Layers Duplicate Image Mirror/Flip and Moved it around to get what I liked...Once happy with it Layers Merge Merge Down then Move this below your mask layer, Activate the bottom layer Selections Select All click on the sparkle layer Image Crop to Selection.

Open AD_Paper3 and copy and paste as a new layer  Activate the bottom layer Selections Select All Selection Modify contract 8 and hit the delete key on your keyboard once and you have your frame. Activate the bottom layer Selections Select All click on your frame layer Image Crop to Selection.

Layers Merge Merge Visible

All that is left (and the most important to do) put on your ©Copyright info and License# and name and you are done!
Thank You for doing my tut and I hope you tried something new!
Hugs, Staci